• Membrane and Water Treatment
• /
• v.7 no.3
• /
• pp.257-275
• /
• 2016

The enantiomeric and racemic effects of tartaric acid (TA) on the properties of polysulfone (PSn) ultrafiltration membranes were studied in terms of morphology and hydrophilicity (HPCT) of membrane. Asymmetric membranes were prepared by direct blending of polyvinyl pyrrolidone (PVP) with D-TA and DL-TA in membrane casting solution. FTIR analysis was done for the confirmation of the reaction of PVP and TA in blended membranes and plain PSn membranes. Scanning electron microscope (SEM), field emission scanning electron microscope (FESEM) and atomic force microscopy (AFM) were used for analyzing the morphology and structure of the resulting membranes. The membranes were characterized in terms of pure water flux (PWF), hydraulic permeability and HPCT. PWF increased from $52L/m^2h$ to $79.9L/m^2h$ for plain and D-TA containing PSn membrane, respectively. Water contact angle also found to be decreased from $68^{\circ}$ to $55^{\circ}$. In Additionally, permeation and rejection behavior of prepared membranes was studied by bovine serum albumin (BSA) solution. A considerable increase in BSA flux (from $19.1L/m^2h$ for plain membrane to $32.1L/m^2h$ for D-TA containing membrane) was observed. FESEM images affirm that the pore size of the membranes decreases and the membrane permeability increases from 0.16 to 0.32 by the addition of D-TA in the membrane. D-TA increases the HPCT whereas; DL-TA decreases the HPCT of PSn membrane. PVP (average molecular weight of 40000 Da) with D-TA (1 wt%) gave best performance among all the membranes for each parameter.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• Journal of Powder Materials
• /
• v.23 no.6
• /
• pp.458-465
• /
• 2016

A $TiO_2$/CNT nanohybrid photocatalyst is synthesized via sol-gel route, with titanium (IV) isopropoxide and multi-walled carbon nanotubes (MWCNTs) as the starting materials. The microstructures and phase constitution of the nanohybrid $TiO_2$/CNT (0.005wt%) samples after calcination at $450^{\circ}C$, $550^{\circ}C$ and $650^{\circ}C$ in air are compared with those of pure $TiO_2$ using field-emission scanning electron microscopy and X-ray diffraction, respectively. In addition, the photocatalytic activity of the nanohybrid is compared with that of pure $TiO_2$ with regard to the degradation of methyl orange under visible light irradiation. The $TiO_2$/CNT composite exhibits a fast grain growth and phase transformation during calcination. The nanocomposite shows enhanced photocatalytic activity under visible light irradiation in comparison to pure $TiO_2$ owing to not only better adsorption capability of CNT but also effective electron transfer between $TiO_2$ and CNTs. However, the high calcination temperature of $650^{\circ}C$, regardless of addition of CNT, causes a decrease in photocatalytic activity because of grain growth and phase transformation to rutile. These results such as fast phase transformation to rutile and effective electron transfer are related to carbon doping into $TiO_2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.404-404
• /
• 2012

저차원계 탄소 동소체는 특유의 구조에서 기인하는 우수한 물리적 성질로 인해 각광받고 있는 물질이다. 탄소원자가 육각형 격자 모양을 지닌 2차원계 물질인 그래핀(graphene)은 뛰어난 전기적, 물리적, 광학적 성질로 인해 전계효과 트랜지스터(field effect transistors), 투명전극(transparent electrodes), 에너지 저장체, 복합체, 화학/바이오 센서 등 다양한 분야에서 활용을 위한 연구가 진행되고 있다. 또한 그래핀이 튜브형태로 말려있는 1차원계 물질인 탄소나노튜브(carbon nanotube)의 전기적, 열적, 기계적 성질은 이를 전계방출 디스플레이(field emission display), 전도성 플라스틱, 가스 저장체, 슈퍼 커패시터 등에 적용가능하게 한다. 최근 2차원계 물질인 그래핀과 1차원계 물질인 탄소나노튜브의 장점을 극대화하기 위한 복합 나노 구조에 대한 다양한 연구가 진행되고 있는 추세이다[1-5]. 본 연구에서 그래핀-탄소나노튜브 혼성 구조의 제작은 다음과 같이 진행되었다. 우선 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 그래핀을 합성하였다. 합성된 그래핀은 메타크릴산메탈 수지(polymetylmethacrylate; PMMA)를 이용한 전사(transfer)방법을 이용하여 원하는 기판에 위치시키고, 직류 마그네트론 스퍼터링(DC magnetron sputtering)을 이용하여 탄소나노튜브의 합성을 위한 촉매층을 증착하였다. 이후 열 화학기상증착법을 이용하여 그래핀 위에 탄소나노튜브를 합성함으로써 그래핀-탄소나노튜브 혼성 구조를 제작하였다. 합성된 그래핀-탄소나노튜브의 구조적 특징은 주사 전자 현미경(scanning electron microscopy)을 통해 확인하였고, 촉매의 표면 형상 및 화학적 상태는 원자힘 현미경(atomic force microscopy)과 X선 광전자 분광법(X-ray photoelectron spectroscopy)을 통해 확인하였다. 또한 제작된 그래핀-탄소나노튜브의 전기적 특성 측정을 통해 나노전자소자로의 응용가능성을 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1613-1616
• /
• 2012

Ni nanoparticles-$TiO_2$ nanotube arrays (Ni/$TiO_2NTs$) composites were prepared by pulsed electrodeposition method and subsequently characterized by means of field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). The FESEM results showed that highly dispersed Ni nanoparticles were not only loaded on the top of the $TiO_2NTs$ but also within the tubular structure, and the particle size of Ni prepared at different current amplitude (100, 200 and 300 $mA{\cdot}cm^{-2}$) was in the range of 15 to 70 nm. The electrochemical studies indicated that Ni nanoparticles loaded on the highly ordered $TiO_2NTs$ are readily accessible for electrochemical reactions, which improve the efficiency of the Ni nanoparticles and $TiO_2NTs$. A maximum specific capacitance (27.3 $mF.cm^{-2}$) was obtained on the Ni/$TiO_2NTs$ composite electrode that prepared at a current of 200 $mA.cm^{-2}$, and the electrode also exhibited excellent electrochemical stability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.349-349
• /
• 2012

산화제를 이용 기상중합법을 통해 합성되는 고전도도 Poly (3,4-Ethylenedioxythiophene)(PEDOT) 박막은 OTFT, RFID tag, 또는 연성 디스플레이 같은 분야에 다양한 응용 가능성을 가지고 있으며 이로 인해 최근에 연구가 활발히 진행되고 있다. PEDOT박막의 전극소재로써 가능성은 박막의 중합 정도와 표면 형상에 크게 좌우된다. 특히, Si-웨이퍼 기판 위에 산화제의 균일한 도포 및 산화제 자체의 높은 산도 ($pH{\leq}2$)에 따른 부반응의 억제는 기상중합법을 이용한 PEDOT박막의 합성에 있어 매우 중요하다. PEDOT의 효율적인 중합과 균일한 성장을 위해 산화제에 DUDO 와 PEG-PPG-PEG를 첨가한 혼합 산화제 용액을 제조 기상중합 방법을 통해 PEDOT박막을 제작하였다. 그 결과 산화제만을 사용하여 제작된 박막에 비해 전도도가 최대 3,660 S/cm로 향상된 PEDOT 박막이 합성되었다. 이러한 결과는 PEG-PPG-PEG가 산화제 용액의 균일 도포를 향상시키고 Base Inhibitor로 작용하는 DUDO는 PEDOT 성장 시 중합속도를 조절하고 부반응을 최소화 하여 효율적인 공액 이중 결합의 생성을 촉진한데 주로 기인한다. 따라서 그로인해 조밀하며 마이크로 스케일의 기공이 최소화된 PEDOT박막의 합성이 가능하였다. PEDOT박막의 특성 평가에는 4-point probe, optical microscopy, Field Emission-Scanning Electron Microscope, 등이 사용되었으며 또한 전도도의 향상 원인을 분석하고자 ATR-IR Spectrophotometer를 이용하여 합성된 박막의 작용기를 분석하였다. 이러한 고전도도의 PEDOT 박막이 OTFT의 전극소재로 사용된다면 OTFT소자의 성능 향상에 크게 기여 할 것으로 기대된다.

• Korean Journal of Materials Research
• /
• v.27 no.8
• /
• pp.403-408
• /
• 2017

We investigated the effect of ZnO buffer layer on the formation of ZnO thin film by ultrasonic assisted spray pyrolysis deposition. ZnO buffer layer was formed by wet solution method, which was repeated several times. Structural and optical properties of the ZnO thin films deposited on the ZnO buffer layers with various cycles and at various temperatures were investigated by field-emission scanning electron microscopy, X-ray diffraction, and photoluminescence spectrum analysis. The structural investigations showed that three-dimensional island shaped ZnO was formed on the bare Si substrate without buffer layers, while two-dimensional ZnO thin film was deposited on the ZnO buffer layers. In addition, structural and optical investigations showed that the crystalline quality of ZnO thin film was improved by introducing the buffer layers. This improvement was attributed to the modulation of the surface energy of the Si surface by the ZnO buffer layer, which finally resulted in a modification of the growth mode from three to two-dimensional.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.200.2-200.2
• /
• 2016

Carbon-based materials have been known as ablative material and have been used for thermal protection systems. Ablation is an erosive phenomenon that results in thermochemical and thermomechanical changes on materials. Ablation resistance is one of the key properties that determines performance and life-time of the thermal protection material under ablative conditions. In this study, ablation properties of graphite, 3-dimensional (C/C) composites (needle-punched type and rod type) were investigated byusing a plasma wind tunnel which produce a supersonic plasma flow from a segmented arc heater with the power level of 0.4 MW. The mass losses and surface roughness changes which contain main result of the ablation are measured. A morphological analysis ofthe carbon-based materials, before and after the ablation test, are performed through field emission scanning electron microscopy (FE-SEM) and non-contact 3D surface measuring system. Electronic balance and a portable surface roughness tester were used for evaluation of the recession and mass loss of the test samples.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.146-146
• /
• 2016

Zinc Oxide (ZnO) was known as a promising material for surface acoustic wave devices, gas sensors, optical devices and solar cells due to piezoelectric material, large band gap of 3.37 eV and large exciton binding energy of 60 meV at room temperature. In particular, the alignment of ZnO nanostructures into ordered nanoarrays can bring about improved sensitivity of devices due to widen the surface area to catch a lot of gas particle. Oxygen plasma treatment is used to specify the nucleation site of round patterned ZnO nanorods growth. Therefore ZnO nanorods were grown on a quartz substrate with patterned polystyrene monolayer by hydrothermal method after oxygen plasma treatment. And then, we carried out nanostructures by adjusting the diameter of the arranged ZnO nanorods according to polystyrene spheres of various sizes. The obtained ZnO nanostructures was characterized by X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM).

• Journal of Surface Science and Engineering
• /
• v.50 no.3
• /
• pp.183-191
• /
• 2017

In this study, surface morphology and mechanical property of TiN and DLC coated pedicle screw have been investigated by field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, vickers hardness test, axial gripping, and axial torsional gripping capacity test. From the EDS and XRD results, the composition and crystal structure of TiN and DLC coated surface were verified. The hardness value was increased by TIN and DLC coating, and the DLC coating surface has the highest value. The gripping capacity also showed higher value for TiN and DLC coated specimen than that of non-coated (Ti alloy) surface. The surface morphology of gripping tested specimen showed rougher scratched surface from Ti alloy than TiN and DLC coated layer.