• Tribology and Lubricants
• /
• 제31권5호
• /
• pp.189-194
• /
• 2015

This paper focuses on the conformal contact problem. A typical example of conformal contact is the contact between a pin and hole. In particular, this paper focuses on the condition for assuming a contact stress field to be a Hertzian pressure profile by using well-known classical solutions associated with Hertzian contact. Persson first developed the conformal contact analysis method around half a century ago, but there have been no significant improvements since then. The present research also adopted this method, but developed new solutions from the viewpoint of application to structural design. The analysis began with a comparison between Persson°Øs conformal contact stress and the Hertzian stress fields. The next step was to check the differences in the normalized stress values of both. This study used the tolerance for the difference in the peak stresses of Persson°Øs solution and the Hertz solution to validate the Hertzian assumption. This gave the range for the difference in radii of the pin and hole when the contact force and mechanical properties of the material are specified. The results showed that, at a tolerance of 5%, the Hertzian assumption is valid if half of the contact angle is less than 35°ý. In addition, the Hertzian assumption holds even for a relatively long contact length, in contrast to the general incomplete contact problem. This paper discusses these results along with other aspects of the application to the design.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.26-27
• /
• 2006

The fundamental mechanical characteristics under tensile and bending deformations of hermetically-sealed reinforced Bi-2223 tape and CTOP processed Bi-2223 tape were examined at 77K. Also, the Tensile strain dependence of the critical current, $I_c$, was obtained at 77K and self-field. The reinforced hermetic tape showed higher tensile strength and a better Tensile strain tolerance than the CTOP processed tape. For bending tests, a rho-shaped sample holder was used giving multiple bending strains. in increasing order. In the same case under bending deformation, the hermetic tape showed a higher bending strain tolerance than the CTOP processed tape. This higher strength of the hermetic tape can be attributed to the thick hardened copper reinforcement layer.

• Journal of Plant Biotechnology
• /
• 제36권3호
• /
• pp.261-267
• /
• 2009

The coexistence policy of GM and non-GM crops is still on the debates in EU since “the recommendation on guidelines for the development of national strategies and best practices to ensure the coexistence of GM crops with conventional and organic farming” has been reported in 2003. The major issues are maximum tolerance level of GMO admixture and minimum isolation distances of GM fields with others including conventional, organic and seeds production. Majority of member states in EU proposed that the tolerance level of GMO admixture must be more strictly controlled, in particular in the fields for organic crops and seeds production. To this end, it was proposed that minimum isolation distances to segregate GM crops from fields with organic crops and seeds production need to be further extended than those of conventional crops since cross pollination with other crops adjacent GM fields is known as the most prevalent source for GMO contamination. In these circumstances, it is strongly suggested that the current legislations need to be revised including the minimum isolation distances of fields for each species before field cultivation for a commercial GM crop is approved for the first time in South Korea.

• 한국작물학회지
• /
• 제28권1호
• /
• pp.100-106
• /
• 1983

이 연구에서는 벼 생육기 침수에서 피해가 가장 뚜렷이 나타나는 주요생육형질의 품종간 차이와 벼의 생식생장기 침수에서 피해를 크게 좌우하는 임실장해의 정도가 가장 예민하게 나타나는 시점을 찾기 위하여 벼의 포기단위, 이삭단위, 그리고 영화단위로 청수와 탁수로 처리하여 얻어진 결과를 요약하면 다음과 같다. 1. 침수일수의 증가에 따라 엽초의 이상신장량이 많아졌고, 침수후의 초장신장량 및 분벽수는 감소되었으며 출수지연일수가 길어졌다. 2. 일/인형 품종은 일본형 품종에 비하여 엽초의 이상신장량이 적고 침수후 초장 신장의 억제 및 분벽력의 감소가 적었다. 3. 침수에 의한 임실장해가 가장 심한 시기는 청수와 탁수 모두 출수기이었으며 특히 출수전의 수잉기말에서 출수후 개화하기 전이었다.

• Journal of Plant Biotechnology
• /
• 제38권1호
• /
• pp.77-86
• /
• 2011

Alcohol dehydrogenase (E.C.1.1.1.1) is an enzyme present in higher plants involved in the anaerobic fermentation pathway that catalyzes the reduction of pyruvate to ethanol, resulting in continuous $NAD^+$ regeneration. It also plays an important role in many plant developments including tolerance to anoxia condition. Here, a cDNA clone encoding alcohol dehydrogenase (ADH) was isolated from Chinese cabbage (Brassica rapa) seedlings. The gene named Bradh1 had a total length of 1,326 bp that contains a single open reading frame of 1,140 bp. The predicted protein consists of 379 amino acid residues with a calculated molecular mass of 41.17 kDa. Expression pattern analysis revealed a tissue-specific expressing gene in different tissues and strongly expressed in the shoot, roots and seeds of Chinese cabbage. Agrobacterium transformation of full-length cDNA Bradh1 into rice Gopumbyeo showed high efficiency. Furthermore, induction of ADH in transgenic rice enhanced tolerance to anaerobiosis stresses and elevated mRNA transcripts. The overexpression of Bradh1 in rice increases germination under anaerobiosis stresses, implying the possibility of developing new varieties suited for direct seeding or flood-prone rice field.

• 한국환경농학회지
• /
• 제12권3호
• /
• pp.255-263
• /
• 1993

The demand of safety assessment for pesticide residues in foods is growing in Korea. In order to assess the actual dietary exposure toward pesticide residues, the problems in utilization of pesticide residue data were reviewed and optimization of food factors applicable to Korean population was conducted. The problems and current status in setting pesticide residue tolerance-domestic and foreign-in foods were also argued. The conclusion is summarized as follows: (1) Anticipated residue estimates(ARE) calculated from field trial residue data, the percentage of crop treated, and the effects of cooking or processing should be utilized for dietary exposure assessment in a real sense. (2) Average daily intake of total foods per person in Korea was 1,104g in 1970's and 1,240g in 1980's. Much variation was observed between the two decades by food commodities. (3) Pesticide residue tolerances in Korea have been established at relatively lower levels in comparison with FAO/WHO or western countries. More extensive studies and data accumulation as related to tolerance setting are called for in future for the sake of health protection and smooth interstate trade.

• 한국광학회지
• /
• 제12권4호
• /
• pp.276-280
• /
• 2001

액정투영기(LCD Projector)의 핵심 구성요소인 액정판에서 액정층의 두께 변화는 광투과도를 변화시켜 화질을 크게 떨어뜨리는 중요한 변수이다. 이 논문에서는 액정판의 화소전극에 빗살무늬를 만들면 액정층의 두께변화를 광학이방성의 변화가 보상하여 계조별 광투과도의 변화를 줄일수 있음을 보였다. 전산시늉의 결과는 현재의 액정판에 비해 액정층 두께변화의 허용공차를 50% 이상키울수 있음을 보여준다. 이 방식은 TN 모우드와 같이 유전률 이방성이 양성인 액정을 쓰는 경우에 적용할 수 있다.

• 한국초지조사료학회지
• /
• 제10권2호
• /
• pp.77-83
• /
• 1990

A three year's field experiment was carried out on newly reclaimed tidal saline soils to evaluate the salt tolerance and growht characteristics, and their relationship to dry matter production and nutrient quality of main selected pasture species. Nine temperate grasses (14 varieties) and two forage crops (sorghum and pearl millet) were grown under different mulching treatments with medium sand and red-yellow soils (fine loamy materials of Typic Hapludults) from 1986 to 1988. Tall wheatgrass, tall fescue, reed canarygrass and alfalfa showed a good tolerance to soil salinity, especially tall wheatgrass (cv. Alkar) produced 19.6 ton/ha dry matter yield annualy under mulching treatment with medium sand depth in lcm. Pearl millet (cv. Gahi-3) was also evaluated as a salt tolerable forage species. Under salt stress in newly reclaimed tidal lands, plant showed a decrease in the assimirable leaf area (LA) as well as specific leaf area (SP. LA) and a low leaf weight ratio(LWR), and it resulted in a low concentration of crude protein and low digestible dry matter contents. Absorption of macro and micro elements in the plant on tidal lands was increased markedly.

• 한국유체기계학회 논문집
• /
• 제10권1호
• /
• pp.49-55
• /
• 2007

An 'Y' strainer type automatic flow rate regulating valve, which functions are to remove impurities from hot water inside the pipe and to maintain a constant flow rate regardless of variations of the differential pressure between valve inlet and outlet at the same time, is developed for distributing hot water equally to several pipes with district heating or central heating system. Numerical analysis of the three dimensional turbulent flow field in a valve shape is carried out to confirm the flow field whether the designed regulator shape is acceptable or not. The final developed valve improves installation time and cost and maintenance ability comparing with set-up 'Y' strainer and regulator separately. Tolerance for the nominal flow rate is also satisfied within ${\pm}5%$.

• 한국군사과학기술학회지
• /
• 제11권6호
• /
• pp.74-80
• /
• 2008

Analysis of the electromagnetic environment on topside of a ship is needed for optimal arrangement of all kinds of antennas to be installed on the shipboard in order to minimize the probability of EMI of equipment and subsystems in real ship after construction phase. In this paper we analyze the characteristics of electric-fields such as radiation patterns and near E-fields of V/UHF antennas installed on a shipboard. We compare simulated results with measurements on the real ship for near E-fields to verify the reliability of the computed electromagnetic environment. Although there are various factors causing errors such as cable loss and impedance mismatching etc. when measuring near E-field, both data show similar trends in the range of the acceptable tolerance.