• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.1
• /
• pp.47-52
• /
• 2010

Green tobacco sickness (GTS) is known as an occupational disease among tobacco harvesters, and a form of acute nicotine intoxication by the absorption of nicotine through the skin from the wet green tobacco plant. On the assumption that GTS may occur by inhalation as well as absorption of nicotine, we measured the airborne nicotine concentration in tobacco field and the processing room of tobacco leaves. We measured the airborne nicotine concentrations in the tobacco field and processing room between 13 and 30 July 2008. All sampling and analyses of airborne nicotine were conducted according to the manual of analytic methods of NIOSH 2551, and we sampled 2 times at 11 points in the tobacco field by area sampling. The sampling in the processing room of tobacco leaves was conducted at 3 points, and earlymorning dew was collected from the tobacco by wringing the moisture into specimen bottles. The airborne nicotine concentration [geometric mean (geometric standard deviation)] in the tobacco field in the P.M. was higher [49.2 mg/$m^3$ (1.3)] than the A.M. concentration [43.4 mg/$m^3$ (1.4)]. Similarly, the nicotine concentration in the processing room of tobacco leaves was 224.4 mg/$m^3$ (1.2), and the concentration of nicotine in the dew was 64.7 mg/${\ell}$ (1.7). Based on our results, the airborne nicotine concentration in the tobacco field and the processing room of tobacco leaves were 100 and 400 times higher than the occupational recommended values (TLV-TWA of 0.5 mg/$m^3$), respectively. In the future, it is hoped that epidemiologic studies and environmental measurements will be conducted for GTS which occurs by inhalation of nicotine. If GTS is confirmed to occur by inhalation of nicotine, respiratory and dermal protective equipment must be distributed.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.526-535
• /
• 2021

Spatial sampling design plays an important role in GIS-based modeling studies because it increases modeling efficiency while reducing the cost of sampling. In the field of agricultural systems, research demand for high-resolution spatial databased modeling to predict and evaluate climate change impacts is growing rapidly. Accordingly, the need and importance of spatial sampling design are increasing. The purpose of this study was to design spatial sampling of paddy fields (11,386 grids with 1 km spatial resolution) in Korea for use in agricultural spatial modeling. A stratified random sampling design was developed and applied in 2030s, 2050s, and 2080s under two RCP scenarios of 4.5 and 8.5. Twenty-five weather and four soil characteristics were used as stratification variables. Stratification and sample allocation were optimized to ensure minimum sample size under given precision constraints for 16 target variables such as crop yield, greenhouse gas emission, and pest distribution. Precision and accuracy of the sampling were evaluated through sampling simulations based on coefficient of variation (CV) and relative bias, respectively. As a result, the paddy field could be optimized in the range of 5 to 21 strata and 46 to 69 samples. Evaluation results showed that target variables were within precision constraints (CV<0.05 except for crop yield) with low bias values (below 3%). These results can contribute to reducing sampling cost and computation time while having high predictive power. It is expected to be widely used as a representative sample grid in various agriculture spatial modeling studies.

• Communications for Statistical Applications and Methods
• /
• v.3 no.1
• /
• pp.219-227
• /
• 1996

역추정 문제에서 독립변수가 하나 더 추가되었을 때 나타나는 효과가 각 변수간의 상관 계수들 및 이들의 함수로 계산되는 결정계수에 따라 어떻게 달라지는지를 살펴보았다. 연구방법으로는 베이지안 방법을 택하였고, 계산상 어려움을 극복하기 위해 Gibbs sampling 방법 및 Mean Field Annealing 방법을 도입하였다.

• Journal of Korean Home Economics Education Association
• /
• v.4 no.1
• /
• pp.17-30
• /
• 1992

This study aims at finding a new home economics education with will include male students as its teaching objects, and then providing home economics teachers with useful materials. For this purpose I examined the curriculum of foreign home economics education and analized male and female secondary school students’and their recognition and demand to the home economics education. Investigated persons are male and female students of the first year of 3 sendary schools and their parents in Seoul, who are choosen by menas of random sampling. The items analysis of questionnaires was performed by means of random sampling. The items analysis of questionnaires was performed by means of SPSS. The results are marked with percentage and the significance level is verified by t and X(sup)2 analysis methods. The results obtained from the items analysis are as follows：1 According to the increasing number of female employees, the mechanization of household affaires, and so on, male students and male parents got to realize the necessity of home economics education and the importance of men and women’s cooperation to lead a family life. 2. It is shown that the goal of home economics deucation must be to form a right value point of the family life and family. This fact implies that many examinees regards the home economics education in the moral point of view. 3. In the necessity degree according to each field of the home economics education curriculum, moral and social aspects such as family relationship, home management & economics, human development and bringing up are regarded more important than household affairs and the related technical aspects. 4. In the difference between groups to the necessity degree according to each field of the home economics education curriculum, there are few differences between male and female parents, but there are many differences between male and female students. Male students regards the contents of the home economics education curriculum less necessary than female students. Especially in the field of clothing, residence, human development and bringing up, the difference between male and female students is obvious. 5. The necessity degree of the contents related to environmental pollution, saving of energy and resources, utilizing of computer, etc. is very high.

• Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.99-106
• /
• 2017

Background: Plants over-expressing Arabidopsis ABF3 (abscisic acid-responsive element-binding factor 3) have enhanced tolerance to various environmental stresses, especially drought. Using terminal restriction fragment length polymorphism (T-RFLP) analysis, we compared the rhizosphere-associated structures of microbial communities for transgenic potato containing this gene and conventional "Jopoong" plants. Results: During a 2-year field experiment, fungal richness, evenness, and diversity varied by year, increasing in 2010 when a moderate water deficit occurred. By contrast, the bacterial richness decreased in 2010 while evenness and diversity were similar in both years. No significant difference was observed in any indices for either sampling time or plant line. Although the composition of the microbial communities (defined as T-RF profiles) changed according to year and sampling time, differences were not significant between the transgenic and control plants. Conclusions: The results in this study suggest that the insertion of ABF3 into potato has no detectable (by current T-RFLP technique) effects on rhizosphere communities, and that any possible influences, if any, can be masked by seasonal or yearly variations.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.2
• /
• pp.72-79
• /
• 2010

In this study, the ionic composition of volcanogenically derived particles and their temporal and spatial distributions have been investigated to evaluate the impact of the volcanic eruption on the local ecosystem and residents. To this end, an intensive field study was conducted to measure the size-segregated particulate matters at the east part of Sakurajima in Japan. Fractionated sampling of particles into > $PM_{10}$, $PM_{10-2.5}$, and $PM_{2.5}$ was made by a multi nozzle cascade impactor (MCI). The concentration of various ions present in the size-resolved particles was determined by Ion chromatography. The time dependent 3-dimensional Volcanic Ash Forecast Transport And Dispersion (VAFTAD) model developed by the NOAA Air Resources Laboratory (ARL) indicated that the sampling site of this work was affected by the volcanic aerosol particles plume. The temporal distributions of sulfate and $PM_{2.5}$ during the field campaign were significantly variable with important contributions to particle mass concentration. The chlorine loss, suspected to be caused by acidic components of volcanic gases, occurred predominantly in fine particles smaller than $10\;{\mu}m$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.1
• /
• pp.63-69
• /
• 1999

To offer a general guideline for the quantitative analysis of airborne pollutants, we designed and conducted a comprehensive QA/QC test using two different strategic approaches, namely (1) field-based comparative measurement and (2) laboratory-based comparative analysis. The former task was performed to make meaningful comparison of combined errors occurring from both sampling and analytical techniques in the measurements of such components as: (1) criteria pollutants, (2) volatile organic compounds (VOCs), and (3) particulate matters with the associated metals and ions. The latter task was also conducted to compare various types of bias arising mainly from the laboratory analytical procedures of (1) gaseous standards of VOCs and (2) of aqueous standards of metals and ions. The concentration data derived from each of these two different types of major tasks were evaluated per chemical species categorized as above. While the very details of these studies are to be reported on an individual basis according to the above classification of the project, this paper is presented to provide an overview of the whole project - its aim and direction.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.27-39
• /
• 2005

Implicit surfaces are geometric shapes which are defined by implicit functions and exist in three-dimensional space. Recently, implicit surfaces have received much attention in solid modeling applications because they are easy to represent the location of points and to use boolean operations. However, it is difficult to chart points on implicit surfaces for rendering. As efficient rendering method of implicit surfaces, the original Adaptively Sampled Distance Fields (ADFs) $method^{[1]}$ is to use sampled distance fields which subdivide the three dimensional space of implicit surfaces into many cells with high sampling rates in regions where the distance field contains fine detail and low sampling rates where the field varies smoothly. In this paper, in order to maintain the sharp features efficiently with small number of cells, an extended ADFs method is proposed, applying the Dual/Primal mesh optimization $method^{[2]}$ to the original ADFs method. The Dual/Primal mesh optimization method maintains sharp features, moving the vertices to tangent plane of implicit surfaces and reconstructing the vertices by applying a curvature-weighted factor. The proposed extended ADFs method is applied to several examples of implicit surfaces to evaluate the efficiency of the rendering performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.11
• /
• pp.23-31
• /
• 2000

In the layered medium, infinite Sommerfeld integral must be evaluated to calculate a space domain Green's function. The complex image method and the two-level method provide rapid calculation and accurate solutions in the near-field region. However, in the intermediate and far-field region, the solutions are inaccurate due to the deformation of the sampling contour. In this paper, we propose a method to calculate an accurate closed-form Green's function for coplanar structure by sampling data on the real axis.

• Journal of Engineering Education Research
• /
• v.11 no.3
• /
• pp.90-95
• /
• 2008

This thesis investigated way of employment, education course of a training school of electrical company. I inquired into a demand of an engineer and a necessary level of professional education. As a result, I have a purpose in what offer the information that cared for a beginning to work elevation and education training and boat development of a student more than. Faced a human power demand in an education demand and a field rehearsal student demand and analyzed it. The sample extraction used industrial classification, work of scale, Assignment sample extraction way (quota Sampling). All data called at a silver phone and the investigated, The data parser analyzed the statistics that used Microsoft Excel.