• Korean Journal of Ecology and Environment
• /
• v.41 no.4
• /
• pp.547-553
• /
• 2008

In recent years, attention on the inhabitation environments of animals and plants which coexist with humans is growing more and more, and relevant research is being activated. In habitats of rivers, a lot of factors are interacting, even among them, some elements especially such hydraulic factors as water velocity and water depth, and such geological shapes as gravels, sand and mud are being considered as primary elements. In this study, various field investigations are carried out to determine the relationship between the river habitats of fishes and hydraulic primary elements using high-tech equipments. Furthermore numerical experiments to classify such habitats according to topographical spaces are carried out. In detail, hydraulic field investigations performed in this study can be summarized as topographical survey, discharge measurement, water level fluctuation monitoring and so on. In numerical experiments, the RMA2 model of the commercial program, Surface-Water Modeling System (SMS), which is widely used in conducting a two-dimensional analysis of the flow behavior of a river is utilized. In conclusion, as a result of field investigation, the relationship between water velocity and water depth is obtained. And the relationship between water velocity and water temperature is identified, too. Finally, using above obtained results, the inhabitation environment was classified into Riffle, Glide, Run, Pool, and E.D.Z according to the relationship between water velocity and water depth.

• Korean journal of applied entomology
• /
• v.32 no.1
• /
• pp.105-114
• /
• 1993

Series of studies were conducted to establish biological and chemical control method for Meloidogyne spp to medical herbs by applied of nematophagous fungi, Arthrobotrys spp, Fusarium spp, and egg parastic fungi, Paecilomyces lilacinus were applied for root-knot nematodes on medicinal herbs, Paeonia albiflora, Codonopsis lanceolata, Cnidium officinale. The results are as follow. In pot experiments, The no. of root gall and egg mass and larvae of Cnidium officinale. The results are as follow. In pot experiments. The no. of root gall and egg mass and larvae of Cnidium officinale, Codonopsis lanceolata, Paeonia japonica lowered in P. Lilacinus treated plots compare to untreated control plots. But A. thaumasia F. oxysporum treated plots were less effective. Effect of egg parasitic fungi and chemical treatment at divided root of Paeonia japonica after sterilized in pot were increased in the fresh weight, root weight, control effect in P. lilacinus treated plots as chemical, Carbo G treated plots compare to untreted control plots. I field experiment, the number of root gall, egg mass and nematode density of Paeonia were also suppressed in P. lilacinus treated plots. It was very effective continuous 2 years and transplanting time on Paeonia japonica infested soil with the M. hapla in field in both region, Chillgok and Euisung treated P. lilacinus as chemical treated plots. Soaking effect of insecticide for Paeonia japonica at diving shoot before transplating in pot were effective for 12hours immersion into 1,000 ppm of Benlate T + Mep Ec, Benlate T + Fenthion EC in pot and field Experiment. In the Examination of fungi activily on P.japonica field 1 year after soil treatment, Number of spore of P. lilacinus were 1,000~1,300 in 3 region except Euisung.

• 한국해양학회지
• /
• v.30 no.6
• /
• pp.543-549
• /
• 1995

The inverse method has been used to estimate a surface velocity field from sequential AVHRR/SST data. In the model, equation system was composed of heat equation and horizontal divergence minimization and the velocity field contained in the advective term of the heat equation, which was linearized in grid system, was estimated. A constraint was the minimization of horizontal divergence with weighting factor and introduced to compensate the null space(Menke, 1984) of the velocity solutions for the heat equation. The experiments were carried out to set up the range of weighting factor and the matrix equation was solved by SVD(Singular Value Decomposion). In the experiment, the scales of horizontal temperature gradient and divergence of synthetic velocity field were approximated to those of real field. The neglected diffusive effect and the horizontal variation of heat flux in the heat equation were regarded as random temperature errors. According to the result of experiments, the minimum of relative error was more desirable than the minimum of misfit as the criteria of setting up the weighting factor and the error of estimated velocity field became small when the weighting factor was order of $10^{-1}$

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.4
• /
• pp.261-270
• /
• 1992

To investigate the flow patterns and diffusions in the Taean coastal waters of the eastern Yellow Sea, hydraulic and numerical experiments of tidal currents and diffusions of dye and cooling water were performed during spring tide along with field observations. Flow patterns obtained by the hydraulic and numerical experiments approximately coincide with those of the field observations. In the fold observations of tidal current, currents flow southwestward during the ebb tide, while currents flow northeastward during the flood tide. and the maximum velocity is 2.13 ㎧ toward WSW direction. The Eulerian diffusion coefficient estimated from field measmements of current is 7.82$\times$10$^{5}$ $\textrm{cm}^2$/s. Diffusion coefficients obtained from the area of dye plume in the model are given by the expression 0.18 $r^{4}$3/, and the coefficients have the range of 10$^{5}$ ~10$^{6}$ $\textrm{cm}^2$/s. These values are similar to the Eulerian diffusion coefficient estimated fram field measurements. Diffusion coefficients obtained in the hydraulic model are one to two orders higher than those obtained in the Onsan Bay in the eastern waters and two to three orders higher than those obtained in the Chinhae Bay in the southern waters of the Korean Peninsula. Diffusion patterns of cooling water by numerical experiments are similar to those of dye plume by hydraulic experiments. Both hydraulic and numerical experiment results of diffusions of dye plume and cooling water in the Taean coastal waters, have shown that the diffusion during the ebb tide is more prevalent than one during the flood tide.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.43-57
• /
• 2003

This paper presents the air corridor planning strategy based on simulation with MUKLMO_3 (Micro-scale Urban Climate Model) to investigate the wind field and air corridor caused by the land-use change of the New Town Development Area in Pan-Gyo. In the first part, the most frequently observed wind field in the New Town Development Area was measured and used as an initial value to simulate a more realistic wind field and air corridor. Several experiments with different initial values of wind fields were carried out to investigate the wind field change affected by the New Town Development. The results show the features of the wind field of the neutral stability condition in the urban canopy layer with a high resolution near the ground. The wind speed is weakened at this level due to the New Town Development. It was found that the wind field and air corridor are influenced by the land-use change. After the development of the New Town, the speed of the wind field decreased and the main wind directions and air corridor changed. In this study, this model is found to be a useful tool for evaluating air corridor and change of wind field in speed and direction.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.522-522
• /
• 1996

An investigation of the effects of transverse magnetic field and Peltier effect on melt convection and macrosegregation in vertical Bridgman crystal grosth of Te doped InSb was been carried out by means of microstructure observation, Hall measurement, electrical resistivity measurement and X-ray analysis. Before the experiments, Interface stability, convective instability and suppression of convection by magnetic field were calculated theoretically. After doping 1018, 1019 cm-3 Te in InSb, the temperature of Bridgman furnace was set up at $650^{\circ}C$. The samples were grown in I.D. 11mm, 100mm high quartz tube. The velocity of growth was about 2${\mu}{\textrm}{m}$/sec. In order to obtain the suppression of convection by magnetic field in the middle of growth, 2-4KG magnetic field was set on the melt. For searching of the shape of solid-liquid interface and the actual velocity of crystal growth, let 2A current flow from solid to liquid for 1second every 50seconds repeatedly (Peltier effect). The grown InSb was polycrystal, and each grain was very sharp. There was no much difference between the sample with and without magnetic field at a point of view of microstructure. For the sample with Peltier effect, the Peltier marks(striation) were observed regularly as expected. Through these marks, it was found that the solid-liquid interface was flat and the actual growth velocity was about 1-2${\mu}{\textrm}{m}$/sec. On the ground of theoretical calculation, there is thermosolutal convection in the Te doped InSb melt without magnetic field in this growth condition. and if there is more than 1KG magnetic field, the convection is suppressed. Through this experiments, the effective distribution coefficients, koff, were 0.35 in the case of no magnetic field, and 0.45 when the magnetic field is 2KG, 0.7 at 4KG. It was found that the more magnetic field was applied, the more convection was suppressed. But there was some difference between the theoretical calculation and the experiment, the cause of the difference was thought due to the use of some approximated values in theoretical calculation. In addition to these results, the sample with Peltier effect showed unexpected result about the Te distribution in InSb. It looked like no convection and no macrosegregation. It was thought that the unexpected behavior was due to Peltier mark. that is, when the strong current flew the growing sample, the mark was formed by catching Te. As a result of the phenomena, the more Te containing thin layer was made. The layer ruled the Hall measurement. The values of resistivity and mobility of these samples were just a little than those of other reference. It was thought that the reason of this result was that these samples were due to polycrystal, that is, grain boundaries had an influence on this result.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.344-355
• /
• 2003

Water quality model applicable paddy field was developed using field experiment during 1999 ${\sim}$ 2002. This model involves inputs from fertilization and sediment release as dirac delta function and continuous source function, respectively, and can simulate various processes such as ponded depth, surface drainage, total nitrogen concentration and total phosphorus concentration in a daily basis. The model was calibrated using data collected from field experiments which was irrigated with ground water and validated from field experiments which was irrigated with surface water. The nutrient concentration of surface water depended on the fertilization and dirac delta function can efficiently explain the valiance of nutrient concentration of surface water by fertilizer. As a result of calibration and validation, this model demonstrates good agreement. The model fit efficiencies ($R^2$) of ponded depth, surface concentration of TN and TP were 0.93,0.98 and 0.95, respectively for calibration, and those of TN and TP were 0.99 and 0.70, respectively for validation. We can apply lake and reservoir model to analysis paddy field considered with shallow ponded system, but it will need so many parameters and have much uncertainty. Fortunately, paddy field have a series of cultural practices yearly basis, such as irrigation-fertilization-forced drain-harvest with a similar time , so simple model may explain the mechanism for paddy field. Water quality model for paddy field developed in this study is simply, needs little parameters, but appeared high applicability to evaluate paddy filed drainage. We recommend this model to estimate nutrient loading from paddy field and establish best management practice.

• Journal of Korean Society for Quality Management
• /
• v.44 no.2
• /
• pp.245-264
• /
• 2016

Purpose: This article focuses on the reviewing the papers published in the Journal of the Korean Society for Quality Control (JKSQC) and the Journal of the Korean Society for Quality Management (JKSQM) since 1965, in the area of design of experiments. In this paper, moreover, some other contents of another statistical quality control areas is included. Methods: The reviewed articles are classified into the three main categories: theory and application of experimental designs, response surface methodology and mixture experiments, and roust designs. Some omitted papers in the other areas of reviewing works are also included in this paper, and the contents and relationships of the published articles are examined and summarized in each sub-field. Results: We summarize the reviewed papers in the chronological road-maps for each sub-field, and outline the relations of the connected papers. We provide comments on the contents and the contributions of the reviewed papers. The future direction of the research in the theory and application areas of experimental designs can be provided by the contents of this research. Conclusion: The diverse topics on the improving the quality in the various industry fields are studied and published on the theory, methodology and the empirical application in the fields of designs of experiments. We can see that the Korean Society for Quality Management (KSQM) has tremendously contributed on the improvement of quality in the manufacturing and service industries by publishing the reviewed articles in this paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.623-631
• /
• 2006

A new model, the periodic transient storage zone model, is developed to describe solute transport mixing in natural streams and rivers with various bottom boundaries. To assess the effects of storage zones structure on transient storage exchange, we analyze data from salt and dye injection experiments in a recirculating laboratory flume with four spatially periodic pool-riffle sequences characteristic of natural river systems under low flow conditions. Dye injections show that solute transport mixing controlled by surface shapes of both the bed and the side in channels. As no existing transient storage model could represent these effects, we developed a new axially periodic transient storage zone model that better represent the effects of channel characteristics in natural river systems. The new model is also fitted to data from salt tracer injection experiments in four reaches of the upper Sabin River, Texas, USA. The proposed model is in good agreement with the field experimental data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.46-58
• /
• 1991

An upper-bound method is applied to determine the final-stage extrsuion load and the deformed configuration of extruded billet. A simple kinematically admissible velocity field for trhee-dimensional deformation at final-stage is proposed. From the proposed velocity field the upper-bound extrusion load, the velocity distribution and the configuration of extruded billet are determined byminimizing the otoal power consumption. Experiments are carried out with full-annealed commercial aluminum billets at room temperature by using different sizes of elliptic punches. The theroretical predictions both in extrusion load and deformed configuration of extruded billet are ingood agreements with the experimentalresults.