• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.107-112
• /
• 2001

This work reports the application of a hollow fiber module(HFM) for Cr(VI) extraction from heavy metal salts mixed solution by using microporous hydrophobic hollow fiber module. In HFM configuration, the organic extraction used for the extraction of Cr(VI) was di-(2-ethyl hexyl) phosphoric acid(D2EHPA) diluted with n-heptane. The study of HFM includes the influence of hydrodynamic and chemical condition, i.e., the flow rate of feed solution, the time of reactive extraction, the concentration of feed solution, and the pH of aqueous phase solutions. Several experiments with synthetic solution of different mixed components system of Cr(VI) solutions established optimum condition to achieve a clean separation of Cr(VI). It was possible to separate Cr(VI) in the presence of metal salts mixed solution, such as Zn(II), Ni(II), Cu(II), and Cd(II) using the HFM technique.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.433-450
• /
• 2002

The daily food intake for dairy cows has to be effectively controlled to breed a sound group of cows as well as to enhance the productivity of the cows. But, feed stuffs are fed in the common bulk for a group of cows in most cases despite that the individual food intake has to be varied. To obtain the feed for each cow, both the nutrient requirements and the nutrient composition of fred have to be provided in advance, which are based on the status of cows such as weigh marginal weight amount of milk, fat concentration in milk, growth and milking stages, and rough feed ratio, etc. Then, the mixed ration fur diet would be computed by the nutrient requirements constraints. However, when TMR (Total Mixed Ration) is conventionally supplied for a group of cows, it is almost impossible to get an optimal feed mixed ration meeting the nutrient requirements of each individual cow since the constraints are usually conflicting and over-constrained although they are linear. Hence, addressed in this paper is a simulated annealing (SA) technique to find the food intake for dairy cows, considering the characteristics of individual or grouped cows. Appropriate parameters fur the successful working of SA are determined through preliminary experiments. The parameters include initial temperature, epoch length. cooling scheduling, and stopping criteria. In addition, a neighborhood solution generation method for the effective improvement of solutions is presented. Experimental results show that the final solution for the mixture of feed fits the rough feed ratio and some other nutrient requirements such as rough fiber, acid detergent fiber, and neutral detergent fiber, with 100 percent, while fulfilling net energy for lactating, metabolic energy, total digestible nutrients, crude protein, and undegraded intake protein within average five percent.

• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1643-1652
• /
• 2021

Objective: Two experiments were conducted to provide a new approach for evaluating feed nutritional value by metabolizable glucose (MG) in piglet diets with different levels of starch and crude fiber. In Exp 1, a regression equation for MG was generated. In Exp 2, the equation was verified, and the optimal growth performance of piglets under appropriate MG levels was tested. Methods: In Exp 1, 20 weaned piglets (7.74±0.81 kg body weight [BW]) were randomly assigned to 1 of 4 treatments, including the basal diet containing different levels of MG (starch, 25.80%, 31.67%, 45.71%, 49.36%; crude fiber, 1.23%, 1.35%, 1.80%, 1.51%). The piglets were implanted with an ileal fistula, cannulation of the carotid artery, portal vein, and mesenteric artery. The chyme from the ileum fistula and blood samples were collected. In Exp 2, 30 weaned piglets (8.96±0.50 kg BW) were randomly assigned to 1 of 5 treatments, including the experimental diets with different levels of MG (37.6, 132.5, 300.0, 354.3, and 412.5 g/kg). The piglets' BW, and feed consumption were recorded to calculate growth performance during the 28-d experiment. Results: In Exp 1, the MG levels in 4 diets were 239.62, 280.68, 400.79, and 454.35 g/kg. The regression equation for the MG levels and dietary nutrients was: Y (MG) = 12.13×X₁ (starch)+23.18×X₂ (crude fiber)-196.44 (R² = 0.9989, p = 0.033). In Exp 2, treatments with 132.5 and 300.0 g/kg MG significantly (p<0.05) increased average daily gain and feed conversion efficiency of weaned piglets, increased digestibility of crude fat, and had no effect on digestibility of crude protein compared to 300.0 to 412.5 g/kg MG. Conclusion: The pig model combining the ileum fistula and cannulation of blood vessels was successfully used to determine the dietary MG levels. The recommended MG level in weaned pig diets is 132.5 to 300.0 g/kg.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.149-157
• /
• 2015

The effects of feed moisture content (25, 35, and 45%), screw speed (230, 250, and 270 rpm), and barrel temperature (130, 140, and $150^{\circ}C$) on the product yield and soluble arabinoxylan (SAX) content from destarched corn fiber (DCF), and its optimization were investigated. The yield and SAX content of corn fiber gum (CFG) from the extruded destarched corn fiber (EDCF) were higher than those of DCF. Statistical analyses revealed that the feed moisture content and barrel temperature had a significant effect on the CFG yield and total SAX content. The optimum extrusion pretreatment conditions were as follows: feed moisture content, 30%; screw speed, 260 rpm; barrel temperature, $133^{\circ}C$. This study showed that the response surface methodology was suitable for the optimization of the extrusion conditions used to maximize the CFG yield and total SAX content from EDCF.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.395-404
• /
• 2019

Objective: Wheat bran (WB) and rice bran (RB) are the agricultural by-products used as poultry feed in many developing countries. However, their use for poultry feed is limited due to high fiber and the presence of anti-nutritional substances (e.g. ${\beta}-glucans$). The objective of this study was to develop a method to improve the quality of those brans by reducing the fiber content. Methods: A two-step fermentation method was developed where the second fermentation of first fermented dry bran was carried out. Fermentation was performed at a controlled environment for 3 h and 6 h (n = 6). The composition of brans, buffer solution and rumen liquor was maintained in a ratio of 1:2:3, respectively. Brans were analyzed for dry matter, crude fiber (CF), acid detergent fiber (ADF), neutral detergent fiber (NDF), and acid detergent lignin (ADL) content. Celluloses and hemicelluloses were calculated from the difference of ADF-ADL and NDF-ADF, respectively. Samples were compared by two-factor analysis of variance followed by Tukey's multiple comparison tests (p<0.05). Results: CF %, ADF % and cellulose tended to decrease and NDF % and hemicellulose content was reduced significantly (p<0.05). After the 1st fermentation step, NDF decreased $10.7%{\pm}0.55%$ after 3 h vs $17.0%{\pm}0.78%$ after 6 h in case of WB. Whereas, these values were $2.3%{\pm}0.30%$ (3 h) and $7.5%{\pm}0.69%$ (6 h) in case of RB. However, after the 2nd fermentation step, the decrease in the NDF content amounted to $9.1%{\pm}0.72%$ (3 h), $17.4%{\pm}1.13%$ (6 h) and $9.3%{\pm}0.46%$ (3 h), $10.0%{\pm}0.68%$ (6 h) in WB and RB, respectively. Cellulose and hemicellulose content was reduced up to $15.6%{\pm}0.85%$ (WB), $15.8%{\pm}2.20%$ (RB) and $36.6%{\pm}2.42%$ (WB), $15.9%{\pm}3.53%$ (RB), respectively after 2nd fermentation of 6 h. Conclusion: Two-step fermentation process improved the quality of the brans for their use in poultry feed.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.23-31
• /
• 2014

This study was accomplished to get the foundation design data of VMD(Vacuum Membrane Distillation) system for Solar Thermal VMD plant. VMD experiment was designed to evaluate thermal performance of VMD using PVDF(polyvinylidene fluoride) hollow fiber hydrophobic membranes. The total membrane surface area in a VMD module is $5.3m^2$. Experimental equipments to evaluate VMD system consists of various parts such as VMD module, heat exchanger, heater, storage tank, pump, flow meter, micro filter. The experimental conditions to evaluate VMD module were salt concentration, temperature, flow rate of feed sea water. Salt concentration of feed water were used by aqueous NaCl solutions of 25g/l, 35g/l and 45g/l concentration. As a result, increase in permeate flux of VMD module is due to the increasing feed water temperature and feed water flow rate. Also, decrease in permeate flux of VMD module is due to increasing salinity of feed water. VMD module required about 590 kWh/day of heating energy to produce $1m^3/day$ of fresh water.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.208-212
• /
• 1999

In the use of glass fiber reinforced plastics(GFRP), cutting is often necessary. But the most of past studies have been interested in the effect of fiber orientation on tool wear. In this study, the effects of fiber contents on tool wear were investigated experimentally. By proper selection of cutting tool, the variables are cutting speed and fiber contents of 10, 20, 30wt% with fixed feed rate and depth of cut.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1171-1177
• /
• 2008

The performance of growing rabbits fed Ruzi grass (Brachiaria ruziziensis), head lettuce (Lactuca sativa) residue, Mimosa pigra and water spinach (Ipomoea aquatica) was studied in an experiment using 64 rabbits (4 males and 4 females per treatment) of 2 breeds, New Zealand White and a crossbred between New Zealand White and native breed. The rabbits had an average initial weight of 668 g, were about 6 weeks old and were housed in individual pens. The foliages were fed ad libitum and a commercial concentrate was fed at a restricted level of 2% of body weight on a dry matter (DM) basis. In the digestibility experiment, the rabbits, 4 per foliage and males only, were fed the same foliages as in the growth experiment but without concentrate. Daily weight gain was lower in the group fed Ruzi grass, 14.8 g/d (p<0.001) compared to 17.6, 18.5 and 18.4 g/d for head lettuce, Mimosa pigra and water spinach, respectively. Feed intake and feed conversion ratio were lowest for the rabbits fed water spinach, 66 g DM/d and 3.6 kg DM/kg live weight, respectively. The New Zealand White breed had a higher daily gain than the crossbred rabbits (p<0.05), 18.0 and 16.7 g/d, respectively. There were no significant differences in feed intake, growth or feed conversion ratio due to sex. The digestibility coefficients of DM, organic matter, crude protein, crude fiber, neutral detergent fiber and acid detergent fiber were significantly lower (p<0.001) in the rabbits fed Ruzi grass. Breed and sex had no effect on digestibility. In conclusion, feeding head lettuce residue, Mimosa pigra and water spinach resulted in higher growth rate and digestibility than feeding Ruzi grass and can be recommended as alternative feeds.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1573-1579
• /
• 2019

Objective: The research was conducted to determine the digestible (DE) and metabolizable energy (ME) contents as well as the apparent total tract digestibility (ATTD) of nutrients in corn, waxy corn and steam-flaked corn fed to growing pigs. Methods: Eighteen growing pigs with initial body weight of $15.42{\pm}1.41kg$ were randomly allotted to three diets including a corn diet, a waxy corn diet and a steam-flaked corn diet in a completely randomized design. Each treatment contained six replicates. The experiment lasted for 12 days, which comprised 7-d adaptation to diets followed by a 5-d total collection of feces and urine. The energy contents and the nutrient digestibility in three ingredients were calculated using direct method. Results: Compared to normal corn, both the amylose and dietary fiber contents in waxy corn were numerically lower, but the starch gelatinization degree was numerically greater. Moreover, the DE and ME contents as well as the ATTD of neutral detergent fiber and acid detergent fiber (ADF) in waxy corn were significantly greater (p<0.05) than those in normal corn when fed to growing pigs. Furthermore, the steam-flaked corn had greater (p<0.05) DE and ME contents, and ATTD of ether extract and ADF compared to normal corn. Conclusion: Both variety and processing procedure have influence on chemical compositions, energy contents and nutrient digestibility of corn. The waxy corn and steam-flaked corn had greater degree of starch gelatinization and DE and ME contents compared to normal corn when fed to growing pigs.

• Korean Journal of Poultry Science
• /
• v.21 no.2
• /
• pp.93-99
• /
• 1994

Chickens subjected to heat stress decrease their heat production by consuming less feed. The lowered feed intake naturally brings about decreased production performance of chicken. The only exception to this is the increased survivability. Birds drink less when they eat less. In hot enviror-mental temperature, chicken need more water for increased heat loss through evaporation an increased urine excretion. Thus, the increased water intake may alleviate the heat stress of chicken. Various electrolytes supplementation to feed or drinking water can alleviate the heat stress of chicken by their effect of increasing water intake. Lasalocid, an ionophorous coccidiostat, was found to have the effect of increasing water consumption of chicken, thereby improving the lowered production performance of heat-stressed chicken. Finally, dietary fiber could be another possible element which can exert beneficial effects on heat-stressed chicken.