• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.253-266
• /
• 1995

Recently, available interests concerning the biologic significance of the extracellular matrix and proliferating cells associated with periodontal disease has been increased. The distribution or expression of cellular proliferation by PCNA, macrophage detection by ${\alpha}$-l-antichymotrypsin, fibronectin playing a important role in host defence mechanisms indirectly, and transglutaminase that cross linked to fibronectin and stimulate fibrin stabilization were studied in inflammed and healthy gingiva. The excised tissue samples were fixed neutral formalin for 24 hours, embedded with paraffin, sectioned at 4-61lffi in thickness, and immunohistochemically processed by LSAB method. The positive reaction to PCNA was localized in the suprabasal and basal layer of inflammed gingiva and an increasing reactivity was observed than healthy gingiva. ${\alpha}$-I-antichymotrypsin positive cells were localized in the basal layer of inflammed gingiva, and there was no or rare positive cells in healthy gingiva. The positive reaction to fibronectin in inflammed gingiva was more than healthy gingiva,"and shown in the connective tissue subjacent to basement membrane of epithelium and in the periphery of the collagen fiber bundles. The positive cells by transglutaminase in inflammed gingiva were noted in suprabasal, spinous, and keratin layer of epithelium, and slightly increased in the capillaries of connective tissues. But the results of this study demonstrated in vitro reaction. Therefore, the role of PCNA,${\alpha}$-l-antichyrnotrypsin, transglutaminase, fibronectin and coefficient with other growth factor and extracellular matrix were further investigated in vivo.

• Composites Research
• /
• v.29 no.5
• /
• pp.243-248
• /
• 2016

Although thermoset carbon fiber composite bipolar plates not only have high mechanical properties but also high corrosion resistance in acid environment, high manufacturing cost and low bulk electrical conductivity are the biggest obstacle to overcome. In this research, thermoplastic polymer is employed for the matrix of carbon composite bipolar plate to increase both the manufacturing productivity and bulk electric conductivity of the bipolar plate. In order to increase the electrical conductivity and strength, plain type carbon fabric rather than chopped or unidirectional fibers is used. Also nano particles are embedded in the thermoplastic matrix to increase the bulk resistance of the bipolar plate. The area specific resistance and the mechanical strength of the developed bipolar plate are measured with respect to the environmental temperature and stack compaction pressure.

• Korean Journal of Ichthyology
• /
• v.20 no.2
• /
• pp.90-96
• /
• 2008

The histological morphology on the skin of Misgurnus anguillicaudatus was described in the three regions such as dorsal, lateral, occiput and subsequently morphological variations of the skin were monthly observed for a year. The skin consisted of epidermis having epithelial cell, club cell and mucus cell, and dermis of mainly connective tissue fiber, embedded scale and blood capillary. Unicellular mucus cells situated at the epidermis underwent seasonal change in its size, as well as number and amounts of mucus-secreting materials, which they greatly increased in winter, but did not in summer. As it is getting cold, the mucus cells' shape changed from initial spherical to oval or elongated form. Such considerable changes in the mucus cell were particularly most evident in the occiput during winter. Moreover, the dermis largely thickened about 2~3 times in winter than in summer. Based on these results, we discussed function for the mucus on what it mainly acts in nature and information on whether mucus cells' seasonal variations affect on hibernation and cutaneous respiration.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.71-84
• /
• 1989

The purpose of this study was to evaluate the effect of tricalcium phosphate and Vitapex on the dogs' periapical tissues. Twenty mandibular premolars from 5 healthy dogs were used for this study. After the animals were anesthetized intramuscularly, pulp chambers were open and pulp tissue was extirpated with a barbed broach and H-file. Then the working length of the root canal was measured with H-file and pulp tissue was completely removed. Before the actual canal filling, the root canals of twenty teeth have been experimentally infected with opening the pulp chamber for 5 weeks. Periapical radiographs of the experimental teeth were taken to monitor the periapical pathological condition. Each root apex of 20 premolars was perforated with engine reamer and the root canals were enlarged with No. 30-60 H-files. They were divided into treated as follows. Control group: The root canal was filled with gutta-percha. Experimental group 1: The canal was dried with sterile paper points and mixture of tricalcium phosphate and physiological saline was overfilled beyond the root apex with a lentulo spiral. Then the root canal was filled gutta-percha and lateral condensation and the pulp chamber was filled with Caviton. Experimental group 2: The root canals were overfilled with Vitapex and were treated in the same manner as those in experimental group 1 At 1,2,3, and 8 weeks after experiment, the periapical tissues including the alveolar bone were fixed with 10% formalin solution for I week and decalcified with Plank-Rycho solution for 5 weeks. The specimens were embedded in paraffin and serial sections were cut into a thickness of 6 ${\mu}m$ at the plane of the root apex. Hematoxyline-eosin and Masson's trichrome stain were made for the histo-pathological examinations. The results were as follows: 1. Ingrowth of collagen fiber was observed from 1 week in control group and experimental groups. 2. The rate of bone formation of experimental group 1 was accelerated more than that of experimental group 2. 3. Resorption of cementum was seen in control group, but apposition of cementum was seen in experimental groups.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.19-22
• /
• 2013

Recently, high speed transmission and large information demand have been increased. Also, researches of integrated optical device for large production and high-efficient planar lightwave circuit (PLC) have been increased. In this paper, integrated optical alignment is proposed which makes passive alignment between optical device and optical fiber possible. The integrated optical device consists of splitter structures which have one input and two outputs. The proposed integrated structure was fabricated by roll-to-roll (RTR) processing method. This method enables to manufacture continuously and the processing time can be shortened. Optical property of the fabricated optical device showed 3.9 dB insertion loss and 0.2 dB optical uniformity using the light source with 1550 nm wavelength.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1030-1036
• /
• 2001

Hydroxyapatite[COL] nanocomposite was prepared through coprecipitation process. The chemical bond formation between HAP and COL was confirmed by diffusive reflectance FT-IR and TEM observation. Higher concentration of COL in the preparation induced tiny nanocrystalline composite particles, but lower concentration of COL contributed to form the well developed HAP particles. From TEM observation and ED(Electron Diffraction) pattern the embedded HAP nanoparticles were oriented along the c-axis of COL fiber. In an aqueous system of constant [Ca$\^$2+/] and [PO$_4$$\^$3-/], quantity of soluble COL matrix was doing an important role of controlling the heterogeneous nucleation site for the formation of HAP nanocrystals. Higher concentration of COL will provide more nucleation sites for Ca$\^$2+/ and so the concentration of calcium ions for the total number of active nucleation sites will be getting relatively dilute.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.247-254
• /
• 2014

In this study, shear test performed to investigate the shear behavior of flat plate that reinforced by embedded GFRP(glass fiber reinforced polymer) plate with openings. Shape of the GFRP shear reinforcement is a plate with several openings to ensure perfect integration with concrete. The test parameters include the distance between the column face and the first line of GFRP plate and number of GFRP plate vertical strip. The result of test showed that when number of GFRP plate vertical strip was increased, shear strength improved. The shear strength for flat plate reinforced GFRP plate in various codes including ACI 318, BS 8110, EUROCODE 2, and KCI were compared to provide more rational approach for reinforced concrete flat plates with GFRP plate.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.305-309
• /
• 2006

This paper presents and illustrates the application of a growth and yield model that supports both forest and mill side volume and value estimates. Traditional forest stand growth and yield models represent the forest landowner view of yield and economics. Predicted yields are estimates of what one would expect from a procurement cruise, and current stumpage prices are applied to investigate optimum management strategies. Optimum management regimes and rotation ages obtained from the forest side view are unlikely to be economically optimal when viewed from the mill side. The actual distribution of recoverable manufactured product and its value are highly dependent on mill technologies and configurations. Overcoming this limitation of growth and yield computer models necessitates the ability to predict and price the expected manufactured distribution of lumber, lineal meters of veneer, and tonnes of air dried pulp fiber yield. With these embedded models, users of the yield simulator can evaluate the economics of possible/feasible management regimes from both the forest and mill business sides. The simulator is a forest side model that has been modified to produce estimates of manufactured product yields by embedding models for 1) pulpwood chip size class distribution and pulp yield for any kappa number (Schultz and Matney, 2002), 2) a lumber yield and pricing model based on the Best Opening Face model developed by the USDA Forest Service Forest Products Laboratory (Lewis, 1985a and Lewis, 1985b), and 3) a lineal meter veneer model derived from peeler block tests. While the model is strictly applicable to planted loblolly pine (Pinus taeda L.) on cutover site-prepared land in the United States (US) Gulf South, the model and computer program are adaptable to any region and forest type.

• Steel and Composite Structures
• /
• v.30 no.1
• /
• pp.31-46
• /
• 2019

In the present study, the various dynamic properties of MWCNT embedded fiber reinforced polymer uniform and tapered composite (MWCNT-FRP) plates are investigated. Various configurations of a tapered composite plate with ply-drop off and uniform composite plate have been considered for the development of the finite element formulation and experimental investigations. First order shear deformation theory (FSDT) has been used to derive the kinetic and potential energy equations of the hybrid composite plates by including the effect of rotary inertia, shear deformation and non-uniformity in thickness of the plate. The governing equations of motion of FRP composite plates without and with MWCNT reinforcement are derived by considering a nine- node rectangular element with five degrees of freedom (DOF) at each node. The effectiveness of the developed finite element formulation has been demonstrated by comparing the natural frequencies and damping ratio of FRP composite plates without and with MWCNT reinforcement obtained experimentally. Various parametric studies are also performed to study the effect of CNT volume fraction and CNT aspect ratio of the composite plate on the natural frequencies of different configurations of CNT reinforced hybrid composite plates. Further the forced vibration analysis is performed to compare the dynamic response of the various configurations of MWCNT-GFRP composite plate with GFRP composite plate under harmonic excitations. It was observed that the fundamental natural frequency and damping ratio of the GFRP composite plate increase approximately 8% and 37% respectively with 0.5wt% reinforcement of MWCNT under CFCF boundary condition. The natural frequencies of MWCNT-GFRP hybrid composite plates tend to decrease with the increase of MWCNT volume fraction beyond 2% due to agglomeration of CNT's. It is also observed that the aspect ratio of the CNT has negligible effect on the improvement of dynamics properties due to randomly orientation of CNT's.

• Composites Research
• /
• v.21 no.6
• /
• pp.23-30
• /
• 2008

In this paper, the effect of the natural aging on the strength distribution and structural service life of a Filament Wound (FW) composite pressure vessel was studied. The fiber failure strain, which is varied significantly, was considered as the design random variable and the strength analysis was carried out by probabilistic numerical approach. The progressive failure analysis technique and the First Order Reliability Method (FORM) were embedded in this numerical model. As the calculation results, the probability of failure was obtained for each aging time steps and it is found that the strength degradation in FW composite pressure vessel, due to the natural aging, appears within 10 year-aging-time. As an example of the life prediction under natural aging using arbitrary laminated model, the service lifetime of 13 years was predicted based on the probability of failure of 2.5% and the design pressure of 3,250 psi.