• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.279-282
• /
• 2002

With the development of industrial society, the interest of new material is growing even in machining center. Composite materials in the new materials are superior to the metals In measure stability of strength, modulus and heat, moreover when mould is prepared, it can be done net shape manufacturing so it can be used widely in all sorts of machine parts, interior materials of car structural construct ions, the space aerial industry, ship materials, sports goods and so on. Therefore in this study, the property of processing drill on CFRP in composite materials by experimental study and some problems were examined.

• Composites Research
• /
• 제15권4호
• /
• pp.1-8
• /
• 2002

본 연구에서는 보다 경량을 유지하면서 고강도 및 고강성을 갖는 섬유 강화형 복합재료 주름판의 합리적인 강성계수를 유도하고, 주름판에서 가능한 36개의 경계조건을 모두 만족시키는 수치적 전개 및 비주얼 베이직 언어를 이용한 해석 시스템을 구축하여 강성 및 진동 해석을 함으로써, 섬유 강화형 복합재료 주름판의 특성을 살펴본다.

• Composites Research
• /
• 제27권1호
• /
• pp.14-18
• /
• 2014

탄소섬유 복합재료는 내열성 및 우수한 기계적 특성을 가지고 있는 우수한 재료이지만 가격이 비싼 결점이 있다. 따라서 본 연구에서는 높은 기계적 강도를 가지며, 가격이 비싸지 않은 재료의 개발을 위해 탄소섬유에 현무암 섬유를 첨가하여 하이브리드 복합재료를 제작하였다. 현무암 섬유의 함유 비율이 높아질수록 강도는 감소하였으며, 탄소의 강화재 비율이 80% 정도에서 CFRP와 유사한 강도를 얻을 수 있었다. 또한 섬유 각각을 적층하여 복합재료를 제작하는 것 보다 섬유사를 혼합시켜 제작한 복합재료에서 더 우수한 기계적 특성을 얻을 수 있었다.

• Composites Research
• /
• 제18권6호
• /
• pp.1-8
• /
• 2005

섬유강화 복합재료는 우수한 기계적, 전자기적 물성 등으로 다양한 분야에서 응용되고 있다. 열경화성 복합재는 제작공정에서의 성형온도와 제품의 운용온도인 상온간의 온도차이로 형상의 변형(스프링 백)이 발생하게 된다. 이러한 스프링 백은 하이브리드 구조의 정밀한 형상 제작을 위해서 반드시 보정되어야할 부분이다. 본 연구에서는 유리섬유/에폭시 복합재와 카본섬유/에폭시 복합재로 구성된 비대칭 하이브리드 복합재를 경화사이클, 적층두께, 적층방법 등 다양한 조건을 적용하여 제작하고 3차원 좌표측정기를 이용하여 스프링 백을 측정하였다. 또한 고전 적층판 이론(CLT)과 유한요소해석(ANSYS)으로 스프링백을 예측하고 실험결과와 비교하였다. 고전 적층판 이론과 유한요소해석으로 예측된 스프링 백은 실험 결과와 잘 일치하였으며, 성형온도가 낮을수록 스프링 백이 감소되는 경향을 보임을 확인하였으나 근원적으로 스프링 백이 제거되지는 않았다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 춘계학술발표대회 논문집
• /
• pp.5.2-8
• /
• 1999

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.155-171
• /
• 2017

This paper presents a proposed method for producing reinforced composite concrete columns reinforced with various types of metallic and non metallic mesh reinforcement. The experimental program includes casting and testing of twelve square columns having the dimensions of $100mm{\times}100mm{\times}1000mm$ under concentric compression loadings. The test samples comprise all designation specimens to make comparative study between conventionally reinforced concrete column and concrete columns reinforced with welded steel mesh, expanded steel mesh, fiber glass mesh and tensar mesh. The main variables are the type of innovative reinforcing materials, metallic or non metallic, the number of layers and volume fraction of reinforcement. The main objective is to evaluate the effectiveness of employing the new innovative materials in reinforcing the composite concrete columns. The results of an experimental investigation to examine the effectiveness of these produced columns are reported and discussed including strength, deformation, cracking, and ductility properties. Non-linear finite element analysis; (NLFEA) was carried out to simulate the behavior of the reinforced concrete composite columns. The numerical model could agree the behavior level of the test results. ANSYS-10.0 Software. Also, parametric study is presented to look at the variables that can mainly affect the mechanical behaviors of the model such as the change of column dimensions. The results proved that new reinforced concrete columns can be developed with high strength, crack resistance, and high ductility properties using the innovative composite materials.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.45-53
• /
• 1998

A method to predict the creep behavior of fiber-reinforced ceramic composites at high temperatures was suggested based on finite element modeling using constituent creep equations of fiber and matrix and showed good agreement with the experimental results. The effects of matrix creep behavior, fiber volume fraction, and residual stresses on the composite creep behavior were also investigated. The results showed that the primary behavior of composites was greatly affected by that of matrix but post-primary behavior was governed by fiber creep characteristics. The increase of fiber volume fraction from 15 vol% to 30 vol% caused the 50% and 40% decrease of steady-state creep rates and total creep strains at $1200^{\circ}C$, 180MPa, respectively. Feasible compressive residual stresses in the matrix caused by different thermal expansion coefficients between the fiber and the matrix could significantly reduce total creep strains of the composite. The creep deformation mechanism in the fiber-reinforced ceramic composites could be explained by the stress transfer and redistribution in the fiber and matrix due to different creep characteristics of its constituents.

• 대한금속재료학회지
• /
• 제47권9호
• /
• pp.542-549
• /
• 2009

Zr-based amorphous alloy matrix composites reinforced with tantalum continuous fibers were fabricated by the liquid pressing process, and their anisotropic mechanical properties were investigated by tensile and compressive tests of $0^{\circ}$(longitudinal)-, $45^{\circ}$-, and $90^{\circ}$(transverse)-orientation specimens. About 60 vol.% of tantalum fibers were homogeneously distributed inside the amorphous matrix, which contained a small amount of polygonal crystalline particles. The ductility of the tantalum-continuous-fiber-reinforced composite under tensile or compressive loading was dramatically improved over that of the monolithic amorphous alloy, while maintaining high strength. When the fiber direction was not matched with the loading direction, the reduction of the strength and ductility was not serious because of excellent fiber/matrix interfacial strength. Observation of the anisotropic deformation and fracture behavior showed the formation of multiple shear bands, the obstruction of crack propagation by fibers, and the deformation of fibers themselves, thereby resulting in tensile elongation of 3%~4% and compressive elongation of 15%~30%. These results suggest that the liquid pressing process was useful for the development of amorphous matrix composites with excellent ductility and anisotropic mechanical properties.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1106-1114
• /
• 1993

본 연구에서는우수한 섬유강화 고분자복합판의 제조 및 개량을 섬유구조의 분리. 배향의 관점에서 연구한다. 유리섬유매트는 유리섬유를 50mm의 길이로 균일하 게 절단하여 공기중에서 분산시켜 6~7mm두께로 만들고,이 유리섬유매트를 바늘의 종류와 스트레칭 횟수에 따라 니들펀칭하여 유리섬유의 매트구조를 변화시킨다. 유리 섬유의 매트구조 별로 모재와 적층시킨 다음 열압축프레스를 사용하여 1차로 시이트를 제작하고, 이 제작된 시이트를 가열로로 가열하여 2차 고온압축 프레스성형한다. 이 때 섬유와 모재의 분리 및 배향의 상관관계를 나타내는 상관계수를 구하고, 이 계수에 미치는 매트 구조의 영향에 대한 실험결과를 보고한다.

• The Journal of Advanced Prosthodontics
• /
• 제4권1호
• /
• pp.1-6
• /
• 2012

PURPOSE. The aim of this study was to compare the flexural strength of polymethyl methacrylate (PMMA) and bis-acryl composite resin reinforced with polyethylene and glass fibers. MATERIALS AND METHODS. Three groups of rectangular test specimens (n = 15) of each of the two resin/fiber reinforcement were prepared for flexural strength test and unreinforced group served as the control. Specimens were loaded in a universal testing machine until fracture. The mean flexural strengths (MPa) was compared by one way ANOVA test, followed by Scheffe analysis, using a significance level of 0.05. Flexural strength between fiber-reinforced resin groups were compared by independent samples t-test. RESULTS. For control groups, the flexural strength for PMMA (215.53 MPa) was significantly lower than for bis-acryl composite resin (240.09 MPa). Glass fiber reinforcement produced significantly higher flexural strength for both PMMA (267.01 MPa) and bis-acryl composite resin (305.65 MPa), but the polyethylene fibers showed no significant difference (PMMA resin-218.55 MPa and bis-acryl composite resin-241.66 MPa). Among the reinforced groups, silane impregnated glass fibers showed highest flexural strength for bis-acryl composite resin (305.65 MPa). CONCLUSION. Of two fiber reinforcement methods evaluated, glass fiber reinforcement for the PMMA resin and bis-acryl composite resin materials produced highest flexural strength. Clinical implications. On the basis of this in-vitro study, the use of glass and polyethylene fibers may be an effective way to reinforce provisional restorative resins. When esthetics and space are of concern, glass fiber seems to be the most appropriate method for reinforcing provisional restorative resins.