• 펄프종이기술
• /
• 제33권4호
• /
• pp.35-41
• /
• 2001

A newly developed functional fiber for textile, Tencel, which is known to have some advantages over wood fiber such as fibrillation, absorbency and so on, was examined to see the possibility of a raw material for hanji. Hanji was manufactured by the conventional handmade method using Tencel of three different fiber lengths with three different levels of mixing ratio of Tencel and paper mullberry fiber, and their physical and calligraphic properties were evaluated and compared with one another. It was needed to develop more efficient beating methods than conventional one such as valley beating for Tencel to be used effectively as a raw material for hanji. It was found out by image analysis that the calligraphic properties of hanji could be improved by mixing of 10 to 20% of Tencel of relatively short-length fiber with paper mulberry.

• 한국안전학회지
• /
• 제34권2호
• /
• pp.7-14
• /
• 2019

A palladium can adsorb hydrogen and detect leaking hydrogen through changes in color and electrical resistance. This study is to evaluate the structural behavior of carbon fiber adding palladium composite materials used in the hydrogen storage vessel. A multi-scale analysis technique was used to analyze accurately the behavior of each material in relation to the microscopic composition. The multi-scale analysis is more proper and precise for composite materials because of considering the individual microscopic structure and properties of each material for composite materials. Also the crack evaluation was performed by XFEM analysis to confirm the reinforcement performance of aluminum as a liner of the hydrogen vessel. The results show that the addition of the palladium material increased the macroscopic stress, but microscopically the carbon fiber stress was reduced. It means the performance improvement of the palladium added carbon fiber/Al composite.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.921-924
• /
• 2008

강섬유의 분포 특성을 평가하는 방법으로는 X-ray 투과 방법, AC-impedance 분광기법 등이 효과적으로 적용되고 있는데, 이 방법들은 고가의 장비가 필요한 단점이 있다. 이 연구에서는 보편화되어 있는 디지털 카메라로 섬유보강 콘크리트의 절단면을 촬영하여 정량적으로 평가할 수 있는 기법을 제시하였다. 평가 방법은 섬유의 검출 과정과 검출된 섬유의 위치 정보 및 단면에서의 형상을 바탕으로 분포 특성을 나타내는 계수를 구하는 과정으로 구성된다. 제안한 평가기법의 실효성과 섬 유보강 콘크리트의 타설 방법에 따른 유동방향에 따라 섬유의 분포 특성을 파악하기 위하여 두가지 타설 방법으로 제조한 섬유보강 콘크리트의 분포특성을 섬유분산성 계수, 단위 면적당 섬유 개수, 그리고 절단면에서 섬유의 기울어진 각도의 분포를 통하여 파악하였다. 또한 섬유의 분포 특성이 섬유보강 콘크리트의 역학적 성능에 미치는 영향을 파악하였다. 실험 결과 섬유의 방향은 유동흐름이 큰 방향으로 배열하게 되어 단위 면적당 섬유의 개수가 제일 많아지게 되고, 분산성 또한 좋은 것으로 나타났다. 또한 타설방향에 따라 휨인장 강도가 50%정도 차이가 발생하는 것으로 나타났다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제25권4호
• /
• pp.196-220
• /
• 2021

This study formulates a new geometric parameterization scheme to effectively address numerical analysis subject to the variation of the fiber radius of a square unit cell. In particular, the proposed mesh-morphing approach may lead to a parameterized weak form whose bilinear and linear forms are affine in the geometric parameter of interest, i.e. the fiber radius. As a result, we may certify the reduced basis analysis of a square unit cell model for any parameters in a predetermined parameter domain with a rigorous a posteriori error bound. To demonstrate the utility of the proposed geometric parameterization, we consider a two-dimensional, steady-state heat conduction analysis dependent on two parameters: a fiber radius and a thermal conductivity. For rapid yet rigorous a posteriori error evaluation, we estimate a lower bound of a coercivity constant via the min-θ method as well as the successive constraint method. Compared to the corresponding finite element analysis, the constructed reduced basis analysis may yield nearly the same solution at a computational speed about 29 times faster on average. In conclusion, the proposed geometric parameterization scheme is conducive for accurate yet efficient reduced basis analysis.

• Structural Engineering and Mechanics
• /
• 제69권3호
• /
• pp.243-255
• /
• 2019

Utilization of fiber beam-column element has gained considerable attention in recent years due mainly to its ability to model distributed plasticity over the length of the element through a number of integration points. However, the relatively high sensitivity of the method to modeling parameters as well as material behavior models can pose a significant challenge. Residual drift is one of the seismic demands which is highly sensitive to modeling parameters and material behavior models. Permanent deformations play a prominent role in the post-earthquake evaluation of serviceability of bridges affected by a near-fault ground shaking. In this research, the influence of distributed plasticity modeling parameters using both force-based and displacement-based fiber elements in the prediction of internal forces obtained from the nonlinear static analysis is studied. Having chosen suitable type and size of elements and number of integration points, the authors take the next step by investigating the influence of material behavioral model employed for the prediction of permanent deformations in the nonlinear dynamic analysis. The result shows that the choice of element type and size, number of integration points, modification of cyclic concrete behavior model and reloading strain of concrete significantly influence the fidelity of fiber element method for the prediction of permanent deformations.

• Journal of the Optical Society of Korea
• /
• 제9권2호
• /
• pp.54-58
• /
• 2005

A novel mode analysis method and differential mode delay measurement technique for a multimode optical fiber based on optical frequency domain reflectometry has been proposed for the first time. We have used a conventional OFDR with a tunable external cavity laser and a Michelson interferometer. A few-mode optical multimode fiber was prepared to test our proposed measurement technique. The differential mode delay (DMD) of the sample fiber was measured to be 16.58 ps/m with a resolution of 1.5 ps/m. We have also compared the OFDR measurement results with those obtained using a traditional time-domain measurement method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.587-592
• /
• 2002

Fiber reinforced concrete has been used for tunnel lining and rehabilitation of old structures. Recently, structural synthetic fiber was developed to overcome the corrosive properties of steel fibers. Fibers play a role to increase the tensile and cracking resistance of concrete structures. The Post cracking behavior must be clarified to predict cracking resistance of fiber reinforced concrete. The purpose of the present study is to develop a realistic analysis method for post cracking behavior of synthetic fiber reinforced concrete members.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.89-95
• /
• 1997

A simulation to investigate the thermal behavior in short fiber or whisker reinforced composite materials has been performed for the application to the thermoelastic stress analysis using Finite Element Method (FEM). To obtain the internal field quantities of composite material, the procedure of micromechanical modeling and the principle of virtual work were implemented. For the numerical illustration, an aligned axisymmetric single fiber model has been employed to assess field quantities. It was found that the proposed simulation methodology for thermoelastic stress analysis is applicable to the complicated inhomogeneous solid for the investigation of micromechanical thermoelastic behavior.

• 한국전산구조공학회논문집
• /
• 제32권6호
• /
• pp.349-357
• /
• 2019

유한요소법(finite element method)은 다양한 분야에서 재료의 역학적 거동을 더욱더 현실적으로 해석하고 예측하는 방법으로 다양한 분야의 제품 개발에 적용되고 있다. 하지만 섬유배향과 변형률 속도가 역학적 특성에 영향을 미치는 유리섬유 강화 플라스틱 복합재료에 관한 수치해석을 이용한 접근 방법은 현재까지 다소 어려움이 있다. 본 연구의 목적은 고분자, 고무, 금속 등과 같은 다양한 복합재료를 위한 선형, 비선형 다중스케일 재료 모델링 프로그램인 Digimat의 수치해석 재료 모델을 활용하여 유리섬유 강화 플라스틱 복합재료의 역학적 특성을 정의하고 검증하는 것에 있다. 또한 이를 통해 좀더 현실적으로 고분자 복합재료의 거동을 예측하고자 한다. 이를 위해 다양한 고분자 중 30wt%의 단섬유 질량 비율을 갖는 폴리부틸렌 텔레프탈레이트(polybutylene terephthalate, PBT)의 섬유배향과 변형률 속도에 따른 인장 특성을 참고문헌을 통해 조사하였다. 또한 Moldflow 프로그램을 사용한 사출해석을 통해 유리섬유 배향 정보를 계산하였으며 이를 매핑(mapping) 과정을 통해 유한요소 인장 시편 모델에 전달하였다. 대표적인 유한요소 상용 프로그램 중 하나인 LS-DYNA는 유리섬유 배향과 변형률 속도에 따른 복합재료의 인장 특성을 연구하기 위해 Digimat과의 연성해석(coupled analysis)에 활용되었다. 그리고 유리섬유 강화 플라스틱 복합재료를 해석하기 위한 LS-DYNA의 다양한 비등방성(anisotropic) 재료 모델들의 장단점을 서로 비교하고 평가하였다.

• Nutrition Research and Practice
• /
• 제6권1호
• /
• pp.28-34
• /
• 2012

The objective of this study was to estimate the contents of dietary insoluble and soluble fiber in school meal. Samples of the school meals were collected from May to June in 2008. Three elementary schools and three middle schools around Masan area were selected for analysis. Dietary soluble and insoluble fibers in the school meals were analyzed directly by the AOAC method. From the initial experiment phase, we used cellulose and pectin as a standard of dietary fiber, and average recovery rate of insoluble fiber and soluble fiber was calculated. The recovery rate was observed, the cellulose $109.7{\pm}11.7%$ (range 90~150%) and pectin $77.8{\pm}10.8%$ (range 64.7~96.7%), respectively. The amounts of insoluble fiber and soluble fiber were analyzed in the total of 66 dishes, which included 7 kinds of cooked rice (bab) made with some cereal products and vegetables, 19 kinds of soup (guk) made with meats or vegetables, 11 kinds of kimchi, 21 kinds of entr$\acute{e}$es or side dishes, and 8 special dishes. Conclusively the school meal, per serving size, would provide above 75% KDRI of total dietary fibers through mainly soups and special menu, with the exception to fruits. In addition, it might be expected that children could consume more soluble fiber from the meals with the special dishes than from the regular ones.