• 제목/요약/키워드: fiber loop mirror

검색결과 26건 처리시간 0.024초

Ultralow Intensity Noise Pulse Train from an All-fiber Nonlinear Amplifying Loop Mirror-based Femtosecond Laser

  • Dohyeon Kwon;Dohyun Kim
    • Current Optics and Photonics
    • /
    • 제7권6호
    • /
    • pp.708-713
    • /
    • 2023
  • A robust all-fiber nonlinear amplifying loop-mirror-based mode-locked femtosecond laser is demonstrated. Power-dependent nonlinear phase shift in a Sagnac loop enables stable and power-efficient mode-locking working as an artificial saturable absorber. The pump power is adjusted to achieve the lowest intensity noise for stable long-term operation. The minimum pump power for mode-locking is 180 mW, and the optimal pump power is 300 mW. The lowest integrated root-mean-square relative intensity noise of a free-running mode-locked laser is 0.009% [integration bandwidth: 1 Hz-10 MHz]. The long-term repetition-rate instability of a free-running mode-locked laser is 10-7 over 1,000 s averaging time. The repetition-rate phase noise scaled at 10-GHz carrier is -122 dBc/Hz at 10 kHz Fourier frequency. The demonstrated method can be applied as a seed source in high-precision real-time mid-infrared molecular spectroscopy.

비선형 증폭 루프에서의 평균 솔리톤의 안정성 (Stability of average soliton propagation in a nonlinear amplifying loop mirror)

  • 심숙이;이성서;김광훈;김기옥
    • 한국광학회지
    • /
    • 제12권6호
    • /
    • pp.507-510
    • /
    • 2001
  • 간단한 비선형 증폭 루프에서의 평균 솔리톤 전송의 안정성을 비선형 Schroedinger방정식에 기초한 수치해석법을 이용하여 솔리톤 주기에 대한 증폭 주기의 비율과 루프에서의 erbium doped광섬유의 길이 비율을 변화시켜가며 계산하고 그 결과를 분석하였다. 계산 결과 루프에서의 erbium doped광섬유의 길이 비율이 작을 경우 증폭 주기가 솔리톤 주기에 비해 많이 작아야 한다는 기존의 평균 솔리톤 형성 조건이 완화됨을 알 수 있었다.

  • PDF

OTDM 시스템을 위한 광섬유 루프 미러를 이용한 고 반복률 펄스 발생에 관한 연구 (A Study on High-Repetition Rate Optical-Pulse for OTDM System Using Fiber Loop Mirror)

  • 최원석;정찬권;김선엽;강영진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.330-333
    • /
    • 2000
  • With the recent development of the ultrahigh-speed optical time division multiplexed system, high-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse seperation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

  • PDF

2.5 Gb/s transmission of a spectrum-sliced incoherent hight source with 0.92 nm bandwidth over 80 km of dispersion-shifted fiber

  • Shin, Sang-Yung;Han, Jung-Hee;Lee, Jae-Seung
    • Journal of the Optical Society of Korea
    • /
    • 제2권1호
    • /
    • pp.22-25
    • /
    • 1998
  • We present a spectrum broadening technique to improve the signal-to-noise ratio of spectrum sliced incoherent light sources using the fiber four-wave mixing effect which occurs in a nonlinear loop mirror located at the receiver. The initial transmission channel bandwidth of 0.92 nm was increased to 1.62 nm in the nonlinear loop mirror at the optical receiver, which enhances the signal-to-noise ratio to a desired value. Using this technique, we have demonstrated the transmission of a 2.5 Gb/s NRZ signal with the 0.92 nm bandwidth through a 80 km dispersion-shifted fiber. The measured transmission penalty was less than 0.2 dB at $1{\imes}10^{-10}$ BER.

루프 미러를 이용한 고 반복률 펄스 발생에 관한 연구 (A Study on High-Repetition Rate Optical-Pulse for Loop-Mirror)

  • 정찬권;김선엽;강영진
    • 한국정보통신학회논문지
    • /
    • 제9권5호
    • /
    • pp.1117-1122
    • /
    • 2005
  • 본 논문은 광섬유 루프 결합기를 이용한 고반복률의 펄스 발생에 대해 연구하였다. 최근 OTDM에서, 고 반복률 광 펄스의 개발이 필요하다. 이것은 광섬유나 집적화된 도파관 지연 선로 회로들 일반적인 접근법과 차이가 있다. 고 반복율 광펄스 다중 현상은 광펄스들의 분리 폭이 사용된 결합기의 전달대역폭보다 더 클 때 발생한다. 분석으로, 출력 반복율은 서로 다른 등가 전송 대역폭인 광섬유 결합기를 이용하여 조절될 수 있다 분리간격은 직렬의 광루프 미러 결합기 수를 조절함으로서 얻을 수 있다.

EDFA로 증폭된 고출력 펄스 신호의 소광비 향상 (Improvement of extinction ratio of amplified pulses by incorporating a nonlinear optical loop mirror)

  • 김병준;최현범;이한협;이동한;김대연;권일범
    • 한국광학회지
    • /
    • 제14권2호
    • /
    • pp.189-193
    • /
    • 2003
  • 높은 peak 값의 광 펄스 신호를 얻기 위하여 대역통과 필터(band pass filter)를 사용한 2단 구조 erbium-doped fiber amplifier (EDFA)를 구성하여 125 W peak 값과 32 ㏈ 소광비(extinction ratio)를 갖는 펄스 신호를 얻었다. 이때 pulse off power는 79 ㎽이다. pulse off power를 낮추고 소광비를 높이기 위하여 nonlinear optical loop mirror(NOLM)을 사용하였다. NOLM 을 통과한 펄스 신호는 35 W peak 값과 0.3 ㎽ pulse off power, 50.4 ㏈ 소광비를 갖는다.

All-Optical Bit-Rate Flexible NRZ-to-RZ Conversion Using an SOA-Loop Mirror and a CW Holding Beam

  • Lee, Hyuek Jae
    • Journal of the Optical Society of Korea
    • /
    • 제20권4호
    • /
    • pp.464-469
    • /
    • 2016
  • All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

광섬유 루프미러내의 편광제어기와 SOA를 이용한 XPM 방식 파장변환기 (XPM mode Wavelength Converter using Polarization Controller and SOA within Optical Fiber Loop Mirror)

  • 이승우;이정열;윤경모;이용기;엄진섭
    • 대한전자공학회논문지SD
    • /
    • 제39권1호
    • /
    • pp.47-57
    • /
    • 2002
  • 본 논문에서는 광섬유 루프미러내에서 편광제어기를 사용하여 SOA내에서의 XPM을 조절할 수 있는 RZ 데이터용 파장변환기를 제안하였으며, 이의 동작을 실험을 통하여 확인하였다. 제안된 방법은 기존의 XPM 구조에 비하여 한 개의 SOA을 필요로 하며 보다 저가인 편광의존형 SOA를 요구한다. 그리고 입력 데이터에 대하여 반전 및 비반전된 파장변환 출력 신호형태들을 동시에 얻을 수 있다는 장점을 지니고 있다.

편광유지 광섬유 루프 미러를 이용한 광섬유 격자 센서의 응용 (An Application of the Fiber Brags Grating Sensor System Using a Polarization Maintaining fiber Loop Mirror)

  • 정승환;이병호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.45-46
    • /
    • 2001
  • 본 논문은 편광유지 광섬유 루프 미러를 이용한 센서 시스템의 제작과 이의 응용에 대한 것이다. 수동 검출법을 통하여 비교적 간편한 신호처리 방식을 갖는 센서 시스템을 제작하였고, Fabry-Perot 필터를 스캔하여 다중점 측정에 이용하였다. 또한 루프 미러의 온도 의존성을 이용하여 온도 센서로의 응용 가능성도 제시하였다.

  • PDF

편광 유지 광섬유 루프 거울을 이용한 고리형 반도체-광섬유 레이저에서의 다파장 발진 (Multiwavelength generation in semiconductor-fiber ring laser using a polarization maintaining fiber loop mirror)

  • 유봉안;이병호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 C
    • /
    • pp.1823-1825
    • /
    • 2001
  • 고리형 반도체-광섬유 레이저 공진기 안에 높은 복굴절률을 가지고 있는 편광 유지 광섬유 루프 거울을 삽입하여 새로운 구조의 다파장 발진 시스템을 제안하고 구현하였다. 이득 매질인 반도체 광 증폭기의 특성으로 인해 실온에서 파장 간격이 1 nm 이내인 22 개의 파장의 빛을 발진시킬 수 있었다.

  • PDF