• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.155-158
• /
• 2007

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.219-220
• /
• 2011

The research is for building safety by using fiber reinforced concrete against impact load. The aim of this study is to evaluation of Impact Resistance of mortar by Reinforcement Condition of Aramid Fiber(fiber length, fiber surface treatment, fiber contents, hyrid reinforcement with steel fiber). Thus, the results indicate that it can improve mix condition and impact resistance by fiber surface treatment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.21-22
• /
• 2013

Nowadays, the fiber which mixed with concrete matrix always has low adhesion with cement paste. It's difficult to use fiber to reinforce the structure. For more adding fiber in concrete would cause some problems as the low flowability and surface polishing. Further study is needed in fiber using. In this research, further study in fiber reinforced concrete has been invested. Various fibers with different properties have been used to prevent cracking. Fiber reinforced concrete's fundamental properties as slump, air content, compressive strength and tensile strength have been tested. Optimum type of the fiber and optimum addition ratio of fiber has been invested to increase the utility of the fiber which used in concrete.

• 한국항공우주학회지
• /
• 제34권9호
• /
• pp.97-103
• /
• 2006

본 논문에서는 디지털 폐루프 신호처리를 이용한 광섬유자이로를 설계하고 성능 시험한 결과를 제시하였다. 회전 입력에 대한 자이로의 피드백 제어를 위해 디지털 세로다인 변조기법이 적용되었고, 환산계수의 안정화를 위해 변조진폭 및 광전력 제어회로를 설계하였다. 프로토타입 광섬유자이로를 시험한 결과, 바이어스 안정도 0.34 deg/hr, 환산계수 비선형도약 100ppm , 회전감지 영역 ${\pm}500$ deg/sec의 성능을 얻었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.411-416
• /
• 2002

In a high speed spindle system, it is very important to monitor the state of rotating rotor. Particularly in active control spindle system, the position sensor must provide feedback to the control system on the exact position of the rotor. In order to monitor the state of a high speed spindle exactly, high accuracy and wide frequency bandwidth of sensors are important. The focus in this paper is to make a fiber optic sensor for monitoring rotor of magnetic bearing, to design the circuit for detecting optical signal, and to evaluation static and dynamic characteristics of fiber optic sensor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.436-439
• /
• 2003

FRP has been used widely for insulator. FRP consists of fiber and resin. The fiber contributes the high strength and modulus to the composite. The fiber orientation in FRP has a great effect on the strength of FRP because the strength of FRP mainly depends on the strength of fiber. In this study, FRP was made unidirectionally by pultrusion method. Outer part of the FRP was made by filament winding method to give fiber orientation to the FRP. And outer part of FRP was also made by wrapping method. The bending strength and bending stresses of FRP rods were simulated according to the winding orientation of glass fiber. The bending strength of FRP was also evaluated. The results of simulation and evaluation were compared each other to investigate main stresses which affect the fracture of FRP. The main stresses which had a great effect on the strength of FRP were shear stresses. Bending strength of the FRP was different with the winding angle. The bending strength of $15^{\circ}$ winded FRP was the highest.

• 한국식품영양과학회지
• /
• 제29권4호
• /
• pp.642-646
• /
• 2000

우렁쉥이 껍질로부터 정제한 섬유소 슬 러리를 각각 2.5%, 5% 및 10% 첨가하여 기능성 어묵을 제조하고 기계적 물성, 전단력, 색 도 및 관능 평가를 수행하여 제품의 품질을 평가하였다. 기계적 조직감 측정 결과 섬유소를 첨가할수록 견고도, 부착성, 껌성, 씹힘성 및 전단력이 증가되었고, 수분활성도와 색도는 유 의적인 차이가 없었다. 관능검사 결과 모든 시료의 색택, 조직감 및 전반적 기호도에서 유의 적인 차이가 없었으나 5% 첨가구를 선호하는 것으로 나타났다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.79-83
• /
• 2000

Interfacial and microfailure properties of carbon liber/bismaleimide (BMI) composites were evaluated using both tensile fragmentation and compressive Broutman tests with acoustic emission (AE). Since BMI is rather difficult matrix to apply for the conventional fragmentation test because of its too low elongation and too brittle and high modulus properties, dual matrix composite system was applied. After carbon fiber/BMI composite was prepared for rod shape by controlling differing curing stage, composites rod was embedded in toughened epoxy as outer matrix. The typical microfailure modes including fiber break, matrix cracking, and interlayer failure were observed during tensile testing, whereas the diagonal slippage in fiber ends was observed during compressive test. On the other hand, AE amplitudes of BMI matrix fracture were higher than carbon fiber tincture under tensile test because BMI matrix has very brittle and high modulus. The waveform of signals coming from BMI matrix fractures was consistent with AE amplitude result under tensile tests.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.65-66
• /
• 2015

In this study, it evaluate mecahnical performance and impact resistance performance of fiber reinforced concrete, fiber reinforced mortar and preplace grout mortar. steel fiber, nylon fiber and polypropylene fiber are reinforced 1vol.% 2vol.% 10vol.% by each fiber type. It evaluate impact resistance performance to use projectile 10mm of 400m/s velocity. As a result, mechnical performance and impact resistance performance of fiber reinforced preplace grout mortar are improved a lot by 10% fiber reinforced ratio.

• 한국통신학회논문지
• /
• 제18권6호
• /
• pp.841-847
• /
• 1993

광섬유(光纖維)가 가지고 있는 손실(損失) 특성(特性) 중(中) 접속손실(接續損失) 값 평가방법(評價方法)을 측정(測定) 분석(分析)하였다. 현재(現在) 장파장용(長波長用) 단일(單一) 모드 광섬유(光纖維) 접속손실(接續損失) 측정(測定)은 Cut-Back 방법(方法)과 후방산란(後方散亂) 손실(損失) 측정방법(測定方法)으로 시행(施行)하고 있다. 이 두 방법(方法)을 사용(使用)하여 얻어진 측정(測定)값을 비교(比較)해 본 결과(結果) OTDR에 의한 접속손실평가(接續損失評價) 방법(方法)은 양(兩) 방향(方向)에서 측정(測定)된 값을 산술(算術) 평균(平均)으로 계산(計算)하여야 한다. 이 결과(結果)는 이론적(理論的)인 계산(計算)값과 일치(一致)함을 보여 주고 있으며 또한 접속(接續)될 두 광섬유(光纖維)의 후방(後方) 산란(散亂) 계수(係數) 값 차(差)에 의하여 발생(發生)됨을 보여준다. 따라서 광(光)케이블 시설시(施設時) 데이타 관리운영(管理運營) 측면(側面)에서 확실(確實)한 적용(適用)이 기대(期待)된다.