• 폴리머
• /
• 제31권3호
• /
• pp.228-232
• /
• 2007

본 연구에서는 의료용 흡수성 재료 및 환경적합성 재료의 개발을 목적으로 생체흡수성의 poly(glycolic acid)(PGA)를 심선(芯線)에 제작하고, 환경분해성의 poly(butylene succinate-co-L-lactate)(PBSL) 및 poly [(R)-3-hydroxybutylate] (PHB)를 외층(外層)에 지닌 복합섬유를 제작하여, PGA의 가수분해에 의해 발생되는 glycolic acid에 의한 PBSL 및 PHB의 가수분해성의 향상을 도모하고자 하였다. 그 결과 PBSL/PGA 복합섬유에 대한 연신은 $65^{\circ}C$에서 실시함에 의해 결정배향이 잘 배열된 섬유를 얻었다. 그러나 PHB/PGA 복합섬유는 $50^{\circ}C$에서는 결정배향이 양호한 섬유를 얻을 수 없었기 때문에 $50^{\circ}C$ 이상의 온도에서 연신을 실시해야 양호한 복합섬유를 얻을 수 있음을 알았다. 또한 in-line 연신에서는 섬유표면에 요철이 발생되기 때문에 on-line 연신을 실시하는 것이 매끄러운 표면을 얻을 수 있음을 알았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.536-539
• /
• 2002

In this paper, we developed the automatic optical fiber aligner by image processing and automatic loading system. Optical fiber is indispensable for optical communication systems that transmit large volumes of data at high speed, but super-precision technology in sub-micron units is required for optical axis adjustment, we have developed 6-axis micro stage system for I/O optical fiber arrays, the initial automatic aligning system/software for a input optical array by the image processing technique, fast I/O-synchronous aligning strategy, the automatic loading/unloading system and the automatic UV bonding mechanism. In order to adjust the alignment it used on PC based motion controller, a $10\mu\textrm{mm}$ repeat-detailed drawing of automatic loading system is developed by a primary line up for high detailed drawing. Also, at this researches used the image processing system and algorithm instead of the existing a primary hand-line up. and fiber input array and waveguide chip formed in line by automatic. Therefore, the developed and manufactured optical aligning system in this research fulfills the great role of support industry for major electronics manufacturers, telecommunications companies, universities, government agencies and other research institutions.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.124-130
• /
• 2014

In a mass manufacturing system of optical fibers, the sufficient cooling of glass fibers freshly drawn from a draw furnace is essential, asinadequately cooled glass fibers can lead to poor resin coating on the fiber surface and possibly fiber breakage during the process. In order to improve fiber cooling at a high drawing speed, it is common to use a helium injection into a glass fiber cooling unit in spite of the high cost of the helium supply. The present numerical analysis carried out three-dimensional thermo-fluid computations of the cooling gas flow and heat transfer on moving glass fiber to determine the cooling performance of glass fiber cooling depending on the method of helium injection. The results showed that afront injection of helium is most effective compared to a uniform or rear injection for reducing air entrainment into the unit and thus cooling the glass fibers at a high fiber drawing speed. However, above a certain amount of injected helium, there was no more increase of the cooling effect regardless of the helium injection method.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.140-143
• /
• 2001

To better understand the formation of necking in drawing processes of fibers, strain distributions during drawing processes have been analyzed. For simplicity, one-dimensional incompressible steady flow at a constant temperature was assumed and quasi-static model was used. To describe mechanical properties of solid polymers, non-linear visco-plastic material properties were assumed using the power law type hardening and rate-sensitive equation. The effects of various parameters on the neck formation were matematically analyzed. As material property parameters, strain-hardening parameter, visco-elastic coefficient and strain-rate sensitivity were considered and, for process parameters, the drawing ratio and the process length were considered. It was found that rate-insensitive materials do not reach a steady flow state and the rate-sensitivity plays a key role to have a steady flow. Also, the neck formation is mainly affected by material properties, especially for the quasi-static model. If the process length changes, the strain distribution was found to be proportionally re-distributed along the process line by the factor of the total length change.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.273-276
• /
• 2002

The fiber formation of conventional melt spinning is extruded by forcing the polymer melt through a spinneret by pumping mechanism usually involving high pressure. This is followed by cooling, solidification and appropriate drawing of the fiber. The spinning process is broadly applicable to polyolefin, polyamide, polyester and indeed the whole range of fibers forming thermoplastic polymers. (omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 제2차학술발표초록집
• /
• pp.14-14
• /
• 1987

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1990년도 제1차 학술발표초록집
• /
• pp.34-35
• /
• 1990

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.131-134
• /
• 2001

합성섬유의 방사공정 중 하나인 연신 공정은 섬유의 성질을 향상시키기 위해 고화된 상태의 섬유를 신장하는 공정이다. 연신할 때 변형이 국부적으로 일어나는 네킹이 일반적으로 관찰되는데, 이 현상은 방사 공정 후에 일어나는, 합성섬유의 역학적 성질과 미세구조에 큰 영향을 미친다[1]. 본 논문에서는 네킹을 분자 구조의 변화에 대한고려 없이 거시적인 관점에서 해석하였다. (중략)

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.206-218
• /
• 2005

Structural studies of series of 'as spun' and drawn PEEK fibers have been carried out using X-ray diffraction and optical microscopy techniques. The analysis of results suggest that fibers produced at a constant draw ratio with increasing draw temperatures show enhanced orientation and crystalline behaviour. The resolved equatorial and meridional traces provide additional structural parameters in terms of crystallinity, crystallite size, and crystallite thickness. It is concluded that drawing at a temperature below $T_g(i.e.,\;144^{\circ}C)$ results in poorly oriented non-crystalline materials, whereas drawing above $T_g$ results in highly oriented semi crystalline materials. Additional drawing proved to increase the overall orientation with slight improvements in lateral order of the chain molecules. Quantitative analysis revealed that the crystallite size increases with increasing drawing temperature. The results also revealed the increased crystallite size upon additional drawing. Crystalline orientation parameter, $_c$, suggests almost perfect orientation. In all cases, the amorphous orientation is found to be lower than the overall orientation parameter obtained from the optical birefringence. As a result of additional drawing, crystalline orientation was found to increase slightly but the increase in the orientation of non-crystalline material was found to be substantial. An average crystalline density was determined from the orthorhombic unit cell dimensions. It was found to vary as a result of processing conditions. It was also found that the value of the maximum birefringence shows heavy dependence on the chain conformation.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.51-60
• /
• 2010

This research works on the effects of drawing conditions on the physical properties of the drawn worsted yarns. The drawn worsted yarns were made by the yarn drawing system under various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn, and concentration of oxidizing agent. The drawn worsted yarns from 2/80Nm to 2/90Nm were obtained from 2/60Nm worsted yarns, the surface and cross-sectional shapes and tensile properties of these various specimens were measured and discussed with the various drawing conditions. The drawing of worsted yarn made constituent wool fiber scratched and made it changing to polygonal cross-sectional shape. The tenacity and modulus were increased with draw ratio and concentration of reducing agent. And tensile strain was increased with draw ratio, which decreased with concentration of reducing agent.