• Computers and Concrete
• /
• 제25권5호
• /
• pp.479-484
• /
• 2020

This work performed to analyses the impact of hooked end steel fibres on the mechanical properties of high performance concrete. The mechanical properties considered incorporate compressive strength, split tensile strength and flexural strength. Taking in to thought parameters, such as, volume fraction of fibres, fibre aspect ratio and grade of concrete, a logical strategy called Taguchi technique was utilized to discover the ideal blend of factors. L9 Orthogonal Array (OA) of Taguchi network comprising of three variables and three dimensions is utilized in this work. The evaluations of concrete considered were M60, M80 and M100. M60 contained 15% of metakaolin as bond swap though for M80 it was 5% of metakaolin and for M100 it was 10% metakaolin and 10% of silica smolder. The volume portion of fiber was fluctuated by 0.5%; 1% and 1.5% and the viewpoints proportions considered were 50, 60 and 80. The test outcomes demonstrate that incorporation of steel fibres enhance significantly the the strength characteristics of concrete, predominantly the splitting tensile strength and flexural strength. In light of relapse investigation of the test information scientific models were produced for compressive strength, split tensile strength and flexural strength of the steel fibre-reinforced high performance concrete.

• 한국분말재료학회지
• /
• 제11권2호
• /
• pp.118-123
• /
• 2004

A formation of aluminum hydroxide by hydrolysis reaction in the water has been studied by using nano aluminum powder fabricated by pulsed wire evaporation(PWE) method. The hydroxide type and morphology depending on temperature and pH were examined by structural analysis. The Boehmite($Al_2O_3$.$H_2O$ or AIO(OH)) was predominantly formed in high temperature region over 4$0^{\circ}C$, while the Bayerite($Al_2O_3$.$H_2O$ or $Al(OH)_3$) below $30^{\circ}C$ of hydrolysis temperature. The Boehmite formation was preferred to the Bayerite in acidic solution in the same hydrolysis temperature. The slowly formed Bayerite phase showed facet crystalline structure, while the fast formed Boehmite was fine fiber with a large aspect ratio of several nm in diameter and several hundred nm in length, and with much larger specific surface area(SSA) than that of Bayerite. The highest SSA was about $420m^2$/g.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.325-326
• /
• 2006

Using $6wt%Y_2O_3-2wt%Al_2O_3$ as sintering additives and Si as a raw powder, the continuously porous in-situ $Si_2N_2O-Si_3N_4$ bodies were fabricated by multi-pass extrusion process and their microstructures were investigated depending on the addition of carbon (0-9wt%) in the mixture powder. The introduction of $Si_2N_2O$ fibers observed in the unidirectional continuous pores as well as in the pore-frame regions of the nitrided bodies can be an effective method in increasing the filtration efficiency. In the case of no carbon addition, the network type $Si_2N_2O$ fibers with high aspect ratio appeared in the continuous pores with diameters of 150-200 nm. However, in the case of 9wt% C addition, the fibers were found without any network type and had diameters of 200-250 nm.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.685-692
• /
• 2017

In this study, the effect of various adhesively bonded composite patches on mechanical properties of notched Al-Mg alloy plates was analyzed. For this purpose firstly, the un-notched and notched specimens were fabricated from 5086 Al-Mg alloys which have been used in armor-plated military vehicles. The surface notches as a flaw were machined with circular cutting tool to form notch aspect ratio a/c=0.15 and notch-to-thickness ratios a/t=0.5 in the radial direction on the test specimens. Then, various composite patches which reinforced by glass, carbon and Kevlar fibers were bonded adhesively at elliptically surface notches. Finally, experimental measurements conducted by applying tensile static loading. The experimental results showed that repairing with composite patches with order of carbon, glass and Kevlar fibers have remarkable effect on tensile strength of the notched plate. Also the finite element models were developed using Abaqus/Explicit code to predict the tensile strength and elongation of unrepaired notched specimen and specimen repaired by carbon fiber composite patch. The comparison between numerical and experimental results showed good agreement between them and proved the accuracy of numerical modeling.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.387-392
• /
• 2018

Various technical approaches and concepts have been proposed to develop conductive super-hydrophobic (SH) surfaces. However, most of these approaches are not usable in practical applications because of insufficient adhesion and cost issues. Additionally, durability and uniformity issues are still in need of improvement. The goal of this research is to produce a large-area conductive SH surface with improved adhesion performance and uniformity. To this end, carbon nanotubes (CNT) with a high aspect ratio and elastomeric polymer were utilized as a conductive filler and matrix, respectively, to form a coating layer. Additionally, nanoscale silica particles were utilized for stable implementation of the conductive SH surface. To improve the adhesion properties between the SH coating layer and substrate, pretreatment of the substrate was conducted by utilizing both wet and dry etching processes to create specific organic functional groups on the substrate. Following pretreatment of the surface, a zirco-aluminate coupling agent was utilized to enhance adhesion properties between the substrate and the SH coating layer. Raman spectroscopy revealed that adhesion was greatly improved by the formation of a chemical bond between the substrate and the SH coating layer at an optimal coupling agent concentration. The developed conductive SH coating attained a high electromagnetic interference (EMI) shielding effectiveness, which is advantageous in self-cleaning EMI shielding applications.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1284-1296
• /
• 2018

Carbon fiber reinforced polymer (CFRP), plates bonding repair method is one of the simple repair methods for cracked steel structures. In this study, the influence of width of CFRP plates on bending fatigue life of out-of-plane gusset joint strengthened with CFRP plates was investigated from the experimental and numerical point of view. In the bending fatigue test of cracked out-of-plane gusset joint strengthened with CFRP plates, the effect of width of CFRP plates on crack growth life was clarified experimentally. Namely, it was revealed that the crack growth life becomes larger with increasing the width of CFRP plates. In the numerical approach, the stress intensity factor (SIF) at the surface point of a semi-elliptical surface crack was estimated based on the linear fracture mechanics. Furthermore, the extended fatigue life of cracked out-of-plane gusset joint strengthened with CFRP plates was evaluated by using the estimated SIF at the surface point and the empirical formula of the aspect ratio of semi-elliptical crack. As the results of numerical analysis, the estimated fatigue life of the specimen strengthened with CFRP plates showed the good agreement with the test results.

• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.305-313
• /
• 2012

비보강 조적조 건축물은 전세계적으로 기존의 건물 및 역사 건축물의 많은 부분을 차지하고 있다. 특히, 최근 지진이 전세계적으로 빈번하게 나타남에 따라 비보강 조적조 구조물에 대한 내진 보강 대책이 요구되고 있다. 현재 비보강 조적조의 보강방법으로는 숏크리트, ECC jacketing, FRPs(fiber reinforced polymer sheet) 등이 개발되어 사용되고 있다. 특히 많은 엔지니어들이 FRPs를 사용한 보강방법을 채택하는 경향이 보이는데 이는 숏크리트나 ECC jacketing과는 달리 벽체의 두께 확장에 따른 구조물 자중 증가 문제없이 비보강 조적조의 전단강도를 향상시킬 수 있기 때문이다. 그러나 비보강 조적 벽체의 복잡한 역학적 거동과 FRPs를 사용한 실험 데이터의 부족은 아직까지도 적절한 보강량을 산정하는데 어려움을 주고 있다. 이 연구는 비보강 조적조의 면내 거동을 확인하고 두 가지의 다른 특징을 가진 FRPs를 사용한 보강 효과에 대한 정보를 주기 위해 수행되었다. 실험체는 1970년대 한국에서 빈번하게 지어진 저층형 연립주택의 내벽을 대상으로 하고 있으며 별도의 내진 설계는 되어있지 않은 상태이다. 실험체의 형상비는 실제 상황을 반영하기 위해 1에 가깝게 설정되어 있다. 보강 재료로는 탄소섬유보강 시트와 하이브리드 시트를 사용하였으며 이들은 각각 다른 극한 강도와 탄성계수 및 극한 변형률을 보유하고 있다. 연구 결과 비보강 조적 벽체의 면내 전단력 저항 성능을 확인하였으며 FRPs가 사용된 내진 보강 방안의 특성을 분석할 수 있었다. 또한 FRPs를 사용한 보의 전단보강 방법에 착안하여 비보강 조적조에 대한 FRPs의 보강 설계안을 도출할 수 있었다.

• 한국강구조학회 논문집
• /
• 제18권2호
• /
• pp.161-171
• /
• 2006

본 논문은 고정과 자유 경계의 다양한 조합을 갖는 직사각형 복합적층판의 고유진동에하고 있다. 본 연구에서는 수학적으로 완전한 특성직교다항식으로 표현되는 근사변위와 Ritz법을 이용하여 Lagrange 범함수의 정상값을 구하였다. 3차원 모델의 정확성이 무차원 진동수의 수렴도를 검토하여 이루어졌으며, 또한 기존 문헌상의 해석결과와의 비교를 통하여 진동수의 정확성을 검토하였다. 본 논문에서 제시된 3차원 진동수의 결과를 이용하여 복합적층판의 기하 및 재료에 관한 매개변수 즉, 형상비(${\mathcal{a/b}}$), 폭두께비(${\mathcal{a/h}}$), 재료의 직교이방성, 플라이 수(${\mathcal{N}}$), 섬유배향각(${\theta}$) 및 적층순서가 미치는 효과를 설명하였다.

• 접착 및 계면
• /
• 제9권3호
• /
• pp.7-13
• /
• 2008

열전도도가 유사한 입자형 필러인 silicon carbide (SiC)와 섬유형 필러인 carbon fiber (CF)를 polyetheretherketone (PEEK) 고분자에 첨가하여 복합재료의 열확산도에 미치는 영향을 연구하였다. 전자현미경을 통해 얻은 단면사진으로부터 SiC와 CF가 PEEK 매트릭스 안에 균일하게 분산되어 있고 필러들이 부분적으로 서로 네트워크를 형성한 것을 관찰하였다. 레이저 섬광법을 이용하여 상온에서 $200^{\circ}C$까지 PEEK/SiC와 PEEK/CF 복합재료의 열확산도를 측정하였으며, 열확산도는 온도가 상승함에 따라 PEEK-필러와 필러-필러 계면에서의 포논산란 증가에 의하여 감소하였다. 필러함량이 증가함에 따라 복합재료의 열확산도가 증가하였으며, 2상계에 대하여 유도된 Maxwell 및 Nielson 예측식을 실험값과 비교함으로써 매트릭스 내의 필러 분포, 방향성, 종횡비 및 필러간의 상호작용 등을 유추할 수 있었다. Nielson 예측식은 PEEK/SiC 복합재료에 대하여 열전도도를 잘 예측하였다. 입자형 필러인 SiC에 비하여 섬유형 필러인 탄소섬유가 동일한 함량에서 열확산에 기여하는 필러 네트워크를 효과적으로 형성하여 높은 열확산도를 가지는 것으로 추정된다.

• 한국식품영양학회지
• /
• 제23권4호
• /
• pp.453-461
• /
• 2010

The purpose of this study was to evaluate nutrient and food intake status and dietary, quality according to obesity based on nutrient and food group intake, in female university students. Surveys were conducted using questionnaires and 3 days, dietary record in 360 female university students residing in Seoul. The subjects were divided into two groups by percent of body fat: an overweight group(percent of body fat more than 23%, n=249) and normal group(percent of body fat below 23%, n=111). The overweight group had a larger proportion of subjects who binged compared to the normal group. There was no significant difference in energy intake between the two groups. The densities of plant calcium and dietary fiber in the overweight group were significantly lower than those of the normal group. However, animal fat density was significantly higher in overweight subjects. The Korean's dietary diversity score(KDDS) of the overweight group was 4.65, and that of the normal group was 4.67, indicating no significant difference. There was no significant difference of DQI-I between the overweight group(50.8) and normal group(51.1). However, the macronutrient ratio score was significantly lower in the overweight group. These results indicate that overweight female college students may have improper dietary habits, and have lower overall balance aspect macronutrient ratios.