• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.40-43
• /
• 2003

최근 관심의 대상이 되고 있는 유기박막트랜지스터 (Organic Thin Film Transisto., OTFT)는 현재 사용되고 있는 무기물 트랜지스터에 비해 가볍고 낮은 공정 온도와 가격으로 인하여 대면적 LCD, EL, smart card의 능동구동소자로서 적용이 가능하다고 알려져 있다[1,2]. 하지만 현재 연구되고 있는 단분자 유기물을 사용한 OTFT는 비교적 높은 온도에서 소자의 각 구성요소를 증착해야 되므로 여전히 복잡한 공정이 필요하며, 활성층으로 쓰이는 유기물과 금속전극의 계면문제로 전기적 특성이 떨어진다[3]. (중략)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.772-779
• /
• 2000

The friction and wear behavior of short carbon fiber reinforced polyetheretherketone was studied experimentally under dry sliding conditions against SCM440(AISI 4140) disks with a different surface roughness and hardness at the low sliding speeds and the high pressures on a pin-on-disk apparatus. Under the low disk surface roughness value the earsplitting noise and stick-slip were occurred. The increased adhesion friction and wear factor with stick-slip made the friction and wear behavior worse. Under the high disk surface hardness the break and falling-off of carbon fibers were accelerated. The carbon fibers fallen off from the matrix were ground into powder between two wear surfaces and this phenomenon caused a abrasive friction and wear factor to increase. So the friction and wear behavior became worse. With the transfer film made of wear particles formed on a disk, the carbon powder film formed on a pin lowered a friction coefficient.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.199-200
• /
• 2003

PEN (Polyethylene 2,6-dicarboxyl naphthalate)은 PET와 화학적 구조가 유사한 polyester 이다. PEN은 PET 의 benzene ring 대신 naphthalene ring이 있는 구조로서 rigid 한 구조를 바탕으로 PET 보다 훨씬 우수한 기계적 물성과 기체 차단성 및 전기 절연성을 가지고 있기 때문에, 현재 PEN에 대해서는 많은 연구가 진행되었고, 상업용으로도 생산되고 있다. 현재까지 진행된 PEN에 대한 연구 중 X-ray를 이용한 배향 거동에 대한 연구보고는 많았으나, 아직까지 FTIR-ATR 을 통해서 시료의 Machine Direction (MD), Transverse Direction (TD), Normal Direction (ND)의 세 방향으로 필름의 3차원적 분자 배향의 거동에 대한 연구보고는 없다. (중략)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.245-246
• /
• 2003

최근 정보통신 산업의 급속한 성장으로 평판 표시소자의 개발에 많은 관심이 모아지고 있다. 특히 이 중에서 액정 표시소자(LCD)의 수요는 급증하고 있으며 그에 관련된 부품 및 소재의 중요성 또한 강조되고 있다. LCD 부품 및 소재에서 가장 중요한 역할을 하는 편광필름은 일반적으로 PVA (polyvinyl alcohol) 또는 polyene 구조를 갖는 고분자 필름에 요오드를 염착시켜 사용되어 왔다. 본 연구에서는 PVA Film에 저온 플라즈마 처리를 함으로서 편광도와 투과도에 어떠한 영향을 미치는지에 대해 알아보고자 한다. (중략)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1990년도 제2차 학술발표초록집
• /
• pp.67-67
• /
• 1990

Three non-ionic and two anioinic spin probes, differing in size and substituent, were synthesized. Their mobility in dried nylon 6 film was investicated by the spin probe technique using electron spin resonance spectrometer. When the size of a spin probe was large and the interaction between the probe molecules and polymer chains existed, the mobility of spin probes decreased. From Arrhenius plots of rotational correlation time, one discontinuity point ($T_d$) was determined. The activation energies for rotation below and above $T_d$ were discussed in terms of the mode of probe rotation. Three spin probes could be viewed as azo dyes having a built-in nitroxide radical. Photolysis of them in dimethylformamide and in nylon 6 film was performed by exposure to 254 nm UV light in the presence of air. It was found that dyes having a built-in nitroxide radical showed better photostability than dyes derived from ${\bata}-naphthol$..

• 한국환경과학회지
• /
• 제22권2호
• /
• pp.243-249
• /
• 2013

Fibers of microbial polyesters, poly(3-hydroxy butyrate) (PHB) and poly(3-hydroxy butyrate-co-3-hydroxy valerate) (HB-co-HV) were prepared by electrospinning method. The obtained fibers were evaluated by differential scanning calorimetry, scanning electron microscopy, and oil absorption. The formation of fibers was strongly dependent on a concentration of solution. At a low concentration, the fibers contained beads which is from aggregation of polymer due to short evaporation time. The fine fibers with $2-5{\mu}m$ diameter were obtained at 20 wt% concentration. The contact angle measurement showed that the fiber had higher water contact angle than the film due to the lotus-like effect. Oil absorbency showed that the fiber had higher than the film. Specially, the HB-co-HV fiber which was spinned from 20 wt% absorbed 65% oil which is much higher than that of a normal polypropylene-based oil paper.

• ETRI Journal
• /
• 제28권1호
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• 전자공학회논문지D
• /
• 제35D권10호
• /
• pp.98-106
• /
• 1998

단일모드 광섬유와 박막도파로 소자들 사이의 효율적인 광전송은 집적광학 시스템의 실현을 위해서 가장 기본적으로 풀어야 하는 필수적인 과제중의 하나인데, 이 때 광섬유와 도파로를 직접 접속시키는 방법은 접속면에서의 필드분포의 불일치로 인해 많은 양의 광전력이 반사되고 발산이 예상된다. 따라서 본 연구에서는 박막도파로와 광섬유의 접속시 경계면에서의 필드분포의 불일치를 피하기위해 uniform 형과 taper 형의 결합 구조를 박막도파로위에 성장시켜 접속시키는 구조를 제안하고 해석하였다. 시뮬레이션 결과 이들 구조가 광섬유로부터 결합도파로 안으로 광파가 전송되면 이후에 박막도파로로 효율적으로 광결합이 일어남을 보였고, 특히 taper 형태의 결합구조가 uniform 형태의 결합구조보다 결합효율 및 소자 제조측면에서 휠씬 더 바람직한 구조임이 증명되었다.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.200-205
• /
• 2005

Celite powder surface-modified with cationic surfactant was used to make polyethylene (PE) specialty film that can be contrasted with ordinary film in having high odor storing capacity and long odor lasting period. Mechanical properties of the films were sacrificed as more celite particles were included, whether celite surface was modified or not. The film with CTAS-modified celite showed the best odor storing and lasting properties for five different flavors of odor, three artificial and two natural ones, among the kinds of films developed. Comparisons among the different films are made, together with brief discussion about the reason for differences in odor lasting period and possible application to packaging industry.

• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.9-15
• /
• 2003

This paper proposes a thickness measurement method of silicon-oxide and poly-silicon film deposited on 12" silicon wafer for spin etcher. Halogen lamp is used as a light source for generating a wide-band spectrum, which is guided and focused on the wafer surface through a optical fiber cable. Interference signal from the film is detected by optical sensor to determine the thickness of the film using spectrum analysis and several signal processing techniques including curve-fitting and adaptive filtering. Test wafers with three kinds of priori-known films, polysilicon(300 nm), silicon-oxide(500 nm) and silicon-oxide(600 nm), are measured while the wafer is spinning at 20 Hz and DI water flowing on the wafer surface. From experiment results the algorithm presented in the paper is proved to be effective with accuracy of maximum 0.8% error.rror.