• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.433-439
• /
• 2003

In this paper, we proposed a novel true time-delay (TTD) feeder for phased array antennas (PAAs) using fiber Bragg gratings (FBGs) and fibers coated with Cr/Au film. This structure requires less number of FBGs than the previously proposed FBG TTD feeders since one FBG is replaced with a metal film reflector in a strand of optical delay line connected to each antenna element and also provides the flexible wavelength selection since the metal film shows wide reflectance spectrum. A TTD for 10 GHz linear PAAs capable of steering beams in three different directions at 0$^{\circ}$and $\pm$30$^{\circ}$has been built. Experimental results on time delays are in good agreement with those calculated at all the steering angles. A 10 GHz linear array antenna with eight antenna elements red from the proposed TTD has been designed and the far-field radiation pattern or this antenna has been obtained by simulation.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.52-55
• /
• 2003

Poly (ethylene 2, 6-naphthalate) (PEN) has been used for a high performance engineering plastics such as fiber, film, and packaging, because of excellent physical properties and outstanding gas barrier characteristics [1-2]. However, the application of PEN is limited because PEN exhibits a relatively high melt viscosity. Recently, many researches for organic/inorganic composites by applying nano-particles to the polymer matrix have been carried out [3], and the nano-particles exhibited greatly improved mechanical and rheological properties [4]. (omitted)

• Tribology and Lubricants
• /
• v.5 no.2
• /
• pp.94-100
• /
• 1989

Friction and Wear behavior of continuous graphite fiber composites was studied for different fiber orientations against the sliding direction. The effect of fiber orientation on friction and wear of the composite and on the deformation of the counterface was investigated experimentally. Pin on disk type testing machine was built and employed to generate the friction and wear data. A graphite fiber composite plate was produced by the bleeder ply molding in an autoclave and machined into rectangular pin specimens with specific fiber orientations, i.e., normal, transverse, and longitudinal directions. Three different wear conditions were employed for two different periods of time, 24 and 48 hours. The wear track of the worn specimens and the metal counterface was examined with a scanning electron microscope (SEM) to observe the damaged fibers on the surface and wear film generation on the counterface. Wear mechanism of the composite during sliding wear is proposed based on the experimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.295-299
• /
• 1996

Intrinsic Fabry-Perot Optical fiber sensors were embedded to tensile side of the 20cm$\times$20cm$\times$150cm cement concrete structures. The sensors were attached to the reinforcing steels and then, the cement concretes were applied. It took 30 days for curing the specimens. After that, the specimens were tested with 4-point bending method by universal testing machine. Strains were measured and recorded by the strain gauges embedded near optical fiber sensors. Output data of fiber sensor showed good linearity to the strain data from the strain gauges up 2000microstrain. The optical fiber sensors showed good response after yielding of structure while embedded metal film strain gauges did not show any response. We also specimens were broken down. In conclusion, the optical fiber sensors can be used as elements of health monitoring systems for cement concrete infra-structures.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.174-178
• /
• 2001

The piezoelectric thin film sensor can be used to interpret variations in structural and material properties, e.g. for structural integrity monitoring and assessment. To illustrate one of this potential benefit, PVDF film sensors are used for monitoring impact damage initiation in Gr/Ep composite panel. Both PVDF film sensors and strain gages are surface mounted to the Gr/Ep specimens. A series of impact test at various impact energy by changing impact mass and height is performed on the instrumented drop weight impact tester. The sensor responses are carefully examined to predict the onset of impact damage such as matrix cracking, delamination, and fiber breakage, etc. Test results show that the particular waveforms of sensor signals implying the damage initiation and development are detected above the damage initiation impact energy. As expected, the PVDF film sensor is found to be more sensitive to impact damage initiation event than the strain gage.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.555-564
• /
• 2003

WDM thin film filters for fiber optical communication were designed using Fabry-Prot type multiple cavity filters and an equivalent thin film technique. As the number of cavities in multiple cavity filters increases, it becomes difficult to design the filters due to a great number of variables (the number of cavities, period of reflectors, order of spacers). To solve the problem of design, we treated the fewest variables, regarding symmetrical thin films as equivalent layers, and we applied structural and numerical formulas based on an analysis method of multiple cavity filters. The equivalent thin film technique was able to provide systematic and quantitative design of the WDM thin film filters.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.72-78
• /
• 2021

The purpose of this study, the purpose of this study is to activate the antibacterial effect on the Chlorinated polyvinyl chloride film by using Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride antibacterial agent with Chlorinated polyvinyl chloride polymer, which is inexpensive and has excellent properties such as heat resistance and chemical resistance. The Chlorinated polyvinyl chloride polymer was dissolved in a dimethylacetamide solvent, and film samples were prepared by varying the ratio of Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride to study the antibacterial performance. A Scanning Electron Microscope-Energy Dispersive X-ray Spectrometer and X-ray photoelectron spectroscopy were employed to confirm the elements in the samples. According to the initial decomposition temperature of the Chlorinated polyvinyl chloride film and the Chlorinated polyvinyl chloride/Octadecyldimet hyl (3-triethoxy silylpropyl) ammonium chloride(10%) film using a Thermogravimetric analyzer(TA-DTA), it was confirmed that the initial decomposition temperature was lowered due to the influence of Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride. In addition, in order to measure the mechanical properties, Universal testing machine was used and the result showed that a strength of Chlorinated polyvinyl chloride/Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride(10%) was 36.8 MPa. The antimicrobial properties of the Chlorinated polyvinyl chloride/Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride(10%) film showed 99.9% antimicrobial properties.

• Korea-Australia Rheology Journal
• /
• v.12 no.2
• /
• pp.125-133
• /
• 2000

The present work is aimed at performing injection molding filling simulation of fiber suspension in polymer based matrix. The numerical simulation incorporates the coupling effect between the flow field and the fiber orientation state together with in-plane velocity gradient effect with recently proposed closure approximations. Predicted orientation components are compared with available experimental data of a film-gated strip and a center-gated disk. Predictions with IBOF closure approximation show excellent behaviors with regard to accuracy and numerical efficiency. However, predicted results seem to have consistent errors in comparison with experimental data. Diffusivity term which accounts for fiber-fiber interaction might have to be modified.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.39-44
• /
• 1998

Low reflectance optical fiber mirrors in the continuous length of the single mode fiber were fabricated using mechanical splices and pieces of fiber coated with $TiO_{2}$ dielectric film at the cleaved end. When fiber mirrors of refelctance of about 1% were produced, the insertion loss ranged from 0.055dB to 0.3dB and the average insertion loss was 0.15 dB. These mirrors could be produced easy in the field.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.38-41
• /
• 2003

Recently, Waterhorne polyurethane(WBPU) have been used for a wide range of commercial applications due to the increasing environmental regulation to reduce low-volatile organic compounds in coating and adhesives materials [1-8]. The WBPU was used in coating industry on fiber at first, and its market is increasing these days. Especially, the Waterborne polyurethane film even is widely used in the field of breathable coating fiber or medical science [9-10]. Water vapor permeability(WVP) is the key property for application to breathable coating fiber. (omitted)