• Korean Journal of Food Science and Technology
• /
• v.16 no.4
• /
• pp.443-450
• /
• 1984

Chemical and microbial changes during Kimchi (a group of Korean seasoned pickles) fermentation were carried out at various temperatures and salt concentrations. The time reaching optimum ripening of Kimchi varied depending upon fermentation temperature and salt concentration. At high temperature and low salt content Kimchi fermentation was faster than at low temperature and high salt content. The ratio of volatile to non-volatile acids reached its maximum at the optimum ripening time of Kimchi and decreased thereafter. Leu. mesenteroids, Lac. brevis, Lac. plantarum, Ped. cerevisiae, Str. faecalis and low acid producing Lactobacilli were isolated from Kimchi samples. However, the main microorganism responsible for Kimchi fermentation was Leu. mesenteroides and Lac. plantarum was the main acidifying organism. Total viable count increased rapidly in the beginning of fermentation and reached its maximum number at optimum ripening time and then decreased slowly as the acidity of Kimchi increased. While the total aerobic bacteria and fungi decreased during Kimchi fermentation, the yeast increased significantly at lower temperature.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.3
• /
• pp.335-342
• /
• 2013

In this study, we compared the performance of two control systems, fuzzy logic control (FLC) and conventional control (CC). The control systems were applied for controlling temperature and substrate moisture content in a solidstate fermentation for the biosynthesis of amylase and protease enzymes by Aspergillus oryzae. The fermentation process was achieved in a 200 L rotating drum bioreactor. Three factors affecting temperature and moisture content in the solid-state fermentation were considered. They were inlet air velocity, speed of the rotating drum bioreactor, and spray water addition. The fuzzy logic control system was designed using four input variables: air velocity, substrate temperature, fermentation time, and rotation speed. The temperature was controlled by two variables, inlet air velocity and rotational speed of bioreactor, while the moisture content was controlled by spray water. Experimental results confirmed that the FLC system could effectively control the temperature and moisture content of substrate better than the CC system, resulting in an increased enzyme production by A. oryzae. Thus, the fuzzy logic control is a promising control system that can be applied for enhanced production of enzymes in solidstate fermentation.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.624-631
• /
• 1995

The fermentation characteristics of Saccharomyces cerevisiae F38-1, a newly isolated thermotolerant yeast strain from a high temperature environment have been studied using a fermentation medium containing 20% glucose, 0.2% yeast extract, 0.2% polypeptone, 0.3% (NH$_{4}$)$_{2}$SO$_{4}$, 0.1% KH$_{2}$PO$_{4}$, and 0.2% MgSO$_{4}$ without shaking at 30$\circ$C to 43$\circ$C for 5 days. The fermentability was over 90% at 30$\circ$C, 88% at 37$\circ$C, 77% at 40$\circ$C and 30% at 43$\circ$C. A similar fermentation result was obtained at pH between 4 and 6 at 30$\circ$C and 40$\circ$C. Aeration stimulated the growth of the strain at the beginning of the fermentation, but it reduced alcohol production at the end of alcohol fermentation. Optimal glucose concentration was determined to be between 18 and 22% at 40$\circ$C as well as 30$\circ$C, but the growth was inhibited at the glucose concentration of over 30%. A fermentability of over 90% was observed at 40$\circ$C in 2 days when the medium was supplemented by 2% yeast extract. A higher inoculum size increased the initial fermentation rate, but not the fermentation. A fermentability of over 90% was achieved in 2 days at 40$\circ$C in a fermentor experiment using an optimized medium containing 20% glucose and 1% yeast extract.

• Journal of the FoodService Safety
• /
• v.5 no.1
• /
• pp.30-39
• /
• 2024

Rice, nuruk, and water are the main ingredients to prepare takju, a traditional Korean liquor. Takju quality varies depending on the type of ingredients and fermentation temperature. In the current study, different combinations of nuruk (SH, JJ) and rice (glutinous rice, non-glutinous rice) were fermented at different temperatures (20, 25℃) and analyzed for quality characteristics over the fermentation period of 10 days. Regardless of the temperature, higher soluble solids (27.1~29%) were measured in the takju prepared with glutinous rice compared to non-glutinous rice. And acidity increased from 0.03% to 1.1% to all takju fermented at both 20 and 25℃, and, higher acidity was measured in the takju prepared with JJ nuruk. The color value of lightness (L) decreased from 57.9 to 23.9. Alcohol content was less than 15.5% in glutinous rice takju and less than 12.3% in non-glutinous rice takju. Total bacteria count (7~8 Log CFU/mL) and lactic acid bacteria count (4~7 Log CFU/mL) increased in different takju. However, the very high yeast count was recorded in takju prepared from SH nuruk compared to takju prepared from JJ nuruk at 0 day of fermentation. A sharp decline (84.92~98.57%) of yeast was observed just after the 1st day of fermentation which gradually reduced to lowest at 4th day of fermentation. No yeast was observed at 6th day fermentation and onwards. These results indicate that the raw materials, especially rice and nuruk, affect the physiochemical properties of takju.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1021-1027
• /
• 1997

$CO_2$production in fermentation of dongchimi was measured and interrelated with changes in pH and titratable acidity. The effects of salt content and temperature on $CO_2$production rate were analysed. Fermentation of dongchimi showed drastic pH decrease in early stage and subsequent levelling off around 3.9, with linearly increased acidity up to 0.3~0.4% optimum quality. $CO_2$production of dongchimi could be analysed to consist of two consecutive stages of constant rate. The first stage $CO_2$production of higher rate moved to the second stage of lower rate when acidity rose beyond 0.3%. When compared to those of 1 and 2% salt content, dongchimi of 3% salt showed lower $CO_2$production rate in the 1st stage and slower acidity change through the whole fermentation period. However, it resulted in the product of highest $CO_2$accumulation at optimal ripeness because of consistent $CO_2$production of longer 1st stage period and relatively high $CO_2$production rate in 2nd stage. $CO_2$production depended on temperature less compared to acidity change(activation energy: 57.3 and 44.3kJ/mol for $CO_2$production of 1st and 2nd stages, respectively; 79.3kJ/mol for acidity change), which means higher ratio of $CO_2$production rate relative to acidity increase at lower temperature. Slower increase in acidity at low temperature also was shown to extend the period of 1st stage $CO_2$production. Therefore, low temperature fermentation was effective in producing the high $CO_2$content dongchimi at adequate acidity, which is desirable organoleptically.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1528-1539
• /
• 2019

Objective: To evaluate the effects on microbial diversity and biochemical parameters of gradually increasing temperatures, from $5^{\circ}C$ to $25^{\circ}C$ on corn silage which was previously fermented at ambient or low temperature. Methods: Whole-plant corn silage was fermented in vacuum bag mini-silos at either $10^{\circ}C$ or $20^{\circ}C$ for two months and stored at $5^{\circ}C$ for two months. The mini-silos were then subjected to additional incubation from $5^{\circ}C$ to $25^{\circ}C$ in $5^{\circ}C$ increments. Bacterial and fungal diversity was assessed by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) profiling and biochemical analysis from mini-silos collected at each temperature. Results: A temperature of $10^{\circ}C$ during fermentation restricted silage fermentation compared to fermentation temperature of $20^{\circ}C$. As storage temperature increased from $5^{\circ}C$ to $25^{\circ}C$, little changes occurred in silages fermented at $20^{\circ}C$, in terms of most biochemical parameters as well as bacterial and fungal populations. However, a high number of enterobacteria and yeasts (4 to $5\;log_{10}$ colony forming unit/g fresh materials) were detected at $15^{\circ}C$ and above. PCR-DGGE profile showed that Candida humilis predominated the fungi flora. For silage fermented at $10^{\circ}C$, no significant changes were observed in most silage characteristics when temperature was increased from $5^{\circ}C$ to $20^{\circ}C$. However, above $20^{\circ}C$, silage fermentation resumed as observed from the significantly increased number of lactic acid bacteria colonies, acetic acid content, and the rapid decline in pH and water-soluble carbohydrates concentration. DGGE results showed that Lactobacillus buchneri started to dominate the bacterial flora as temperature increased from $20^{\circ}C$ to $25^{\circ}C$. Conclusion: Temperature during fermentation as well as temperature during storage modulates microorganism population development and fermentation patterns. Silage fermented at $20^{\circ}C$ indicated that these silages should have lower aerobic stability at opening because of better survival of yeasts and enterobacteria.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.391-396
• /
• 2008

In this study, we attempted to optimize the fermentation processes in the production of lactic acid juice with 20% Maesil(Prunus mume) extract using Lactobacillus plantarum isolated from Kimchi, assessing a variety of pH, temperature, sugar compositions, and sugar concentrations. In the preparation of fermented Maesil(Prunus mume) extract, the optimal pH and fermentation temperature were 4.0 and $35^{\circ}C$, respectively. When the effects of various sugar sources and concentrations on lactic acid fermentation were assessed, 15% fructose was shown to yield more acid productivity than was observed with other sugar sources. The optimum composition, on the basis of our sensory evaluations, was determined to be a fructose concentration of 15% and a fermentation time of $72{\sim}96$ hours.

• Microbiology and Biotechnology Letters
• /
• v.15 no.5
• /
• pp.356-360
• /
• 1987

Effects of temperature on sisomicin fermentation were investigated. From the specific growth rates for logarithmic phase estimated at various temperatures, 8.2 kcal/g-mol was obtained as an activation energy for cell growth. It suggests that cell growth rate was limited by the internal diffusion layers for nutrients or oxygen caused by aggregated cells. Final antibiotic titer was decreased with in-creasing temperature, and it depended highly on the temperature to which cells were exposed during the logarithmic phase of growth. Temperature shifts during fermentation brought about an increase in antibiotic productivity.

• Food Science and Biotechnology
• /
• v.15 no.5
• /
• pp.814-816
• /
• 2006

Monacolin K (MK) was produced on soybean using Monascus ruber GM011 by a two-stage-fermentation process. The optimal temperature was identified as $28^{\circ}C$. Higher yield was obtained by multiple-level-temperature cultivation than by single-level-temperature cultivation. The highest yield of total MK, 4.810 mg/g dry soybean product, was attained after 30 days of solid-state fermentation. No citrinin could be detected in the fermented soybean.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.627-634
• /
• 2012

Squid Sikhae is traditional salt-fermented food in Korea. We evaluated the standardization of optimal processing conditions for desirable quality-controlled squid Sikhae using analyses of physiochemical properties, microbiological species, and organoleptic tests. Among several squid Sikhae preparation processes, the optimal fermentation temperature sun-dried sea salt concentration, and fermentation period for squid Sikhae of acceptable quality were $10^{\circ}C$, 4%, and 6 days, respectively. Amino-N and volatile basic nitrogen (VBN) contents of the acceptable quality squid Sikhae were 162.51 mg/100 g and 15.25 mg/100 g, respectively.