• Journal of radiological science and technology
• /
• v.26 no.1
• /
• pp.83-89
• /
• 2003

The accurate measurement of the femoral anteversion is very important to the practice of orthopedic and osteotomy. It is measured by means of the axis of head and neck of the femur and the knee axis. At the present time, widely used computed tomography method of measuring anteversion on femoral necks of patients. Measurement by the manual method and image viewer of computed tomography to determine the anteversion of femoral head were carried out on both femurs. In September and October 2002, 5 patients 28 to 36 years of age were randomly selected from Seoul National University Hospital. The purpose of this paper was to introduce a new method to measure femoral anteversion angle utilizing PACS image viewer program in the MR imaging. Significant difference was observed between the right and left side the image viewer measurement of femoral anteversion. In conclusion, MR imaging very usefulness in the measured the angle of the femoral anteversion.

• Tribology and Lubricants
• /
• v.13 no.1
• /
• pp.82-87
• /
• 1997

The modern orthopaedics frequently uses the total hip replacement in the artificial hip joint. The wear in this joint requires a re-replacement of hip joints because it is under the severe load and friction conditions. To solve these problems the previous studies have been mainly focussed on the development of new materials. The research of new materials, however, needs much time and effort since it should be experimented for its bio-compatibility, friction, and wear characteristics. To reduce the work, in this study, the finite element analysis is applied to find new combinations of bio-materials in the total hip replacement which has the excellent contact characteristics. A non-linear FEM program MARC with 5-node axisymmetric element was used for analyzing the contact stresses between the hip joints. The computed results show that in case of acetabulum UHMWP has good characteristics, in femoral head, $Al_2O_3$, and in stem, Ti6Al4V.

• 대한두경부종양학회:학술대회논문집
• /
• 1986.11a
• /
• pp.10.1-10.1
• /
• 1986

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.6
• /
• pp.519-527
• /
• 2019

Purpose: To evaluate the treatment result in polyostotic fibrous dysplasia classified according to the involvement of the femoral head. Materials and Methods: Twenty-three patients from March 1987 to March 2014 were reviewed retrospectively. Patients with no involvement of the physeal scar in the femoral head were classified as Type I, and those with involvement of the physeal scar were classified as Type II. A plain radiograph was used to measure the femoral neck shaft angle, articulo-trochanteric distance (ATD), and anterior bowing through the lateral view. A teleoroentgenogram of the lower limb was used to measure the leg length discrepancy and lower extremity mechanical axis. The pre- and postoperative femoral neck-shaft angle and ATD were compared to assess the degree of correction of the deformity. Results: Among a total of 46 cases (23 patients), 28 cases (23 patients) had lesions in the proximal femur. Type I were 16/28 cases (15/23 patients) and Type II were 12/28 cases (9/23 patients). The preoperative proximal femoral neck-shaft angle was 116.8° in Type I and 95.3° in Type II. The ATD was 12.08 mm in Type I and -5.54 mm in Type II. The deformity correction showed significant improvement immediately after surgery, the deformity correction was lost in Type II (neck shaft angle Type I: 133.8°-130.8°, Type II: 128.6°-116.9°, and ATD Type I: 17.66-15.72 mm, Type II: 7.44-4.16 mm). The extent of anterior bowing was 12.74° in Type I and 20.19° in Type II. The mean differences of 12 mm between the 9 patients who showed a leg length discrepancy and the lower extremity mechanical axis showed 4 cases of lateral deviation and 7 cases of medial deviation. Conclusion: In polyostotic fibrous dysplasia, when the femur head is involved, the femur neck shaft angle, ATD, and anterior bowing of the femur had more deformity, and the postoperative correction of deformity was lost, suggesting that the involvement of the femoral head was an important factor in the prognosis of the disease.

• Journal of Acupuncture Research
• /
• v.35 no.1
• /
• pp.21-27
• /
• 2018

Background: Examination of the effects of deer antler, old antler, and antler glue on postmenopausal osteoporosis in an ovariectomized Sprague-Dawley rat model. Methods: The study involved 7 experimental groups; SHAM (sham-operated rats), OVX (ovariectomized rats), E2 (ovariectomized rats with estradiol $10{\mu}g/kg$ daily, orally), DA (ovariectomized rats with deer antler extract 5.83 mg/kg), OA (ovariectomized rats with old antler extract 3.8 mg/kg), low-AG (ovariectomized rats with low dose of antler glue powder 12.5 mg/kg), high-AG (ovariectomized rats with high dose of antler glue powder 37.5 mg/kg). After 6 weeks of treatment, body weight, blood calcium, phosphorus, estradiol, liver [alkaline phosphatase (ALP), aspartate transaminase (AST), alanine transaminase (ALT)] and kidney [blood urea nitrogen (BUN)/creatinine ratio] function, and femoral bone mineral density (BMD) were measured. Results: The body weights of DA, OA, low-AG, and high-AG groups did not significantly differ from OVX group. Blood estradiol levels were significantly increased in the DA, low-AG, and high-AG groups compared to the OVX group. Blood calcium, phosphorus, ALP, AST, and ALT levels and BUN/creatinine ratio did not show significant changes in the DA, OA, low-AG, and high-AG groups. BMDs of the femur, and femoral head and neck were significantly increased in the low-AG group. In the OA group, the BMD of the femoral head and neck was significantly increased. Conclusion: Treatment with deer antler, or antler glue for 6 weeks was effective for increasing estradiol and femoral BMD in ovariectomized rats, suggesting that this may be of therapeutic benefit for osteoporosis.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.281-286
• /
• 2019

Avascular necrosis (AVN) is defined as the cellular death of bone and bone marrow components due to the loss of blood supply, and associated with post-traumatic or non-traumatic events. AVN usually involves the epiphysis of a long bone, such as the femoral and humeral heads, which are susceptible to osteonecrosis. Many studies have been conducted but they were restricted to investigations of femoral head avascular necrosis. The presence of osteonecrosis in the proximal femur may impair biological fixation after total hip arthroplasty. We report a 56-year-old male patient with avascular necrosis located not only at the femoral head, but also in the entire femur, including the medullary cavity, who underwent total hip arthroplasty 2 years earlier along with a review of the relevant literature.

• Molecules and Cells
• /
• v.26 no.5
• /
• pp.490-495
• /
• 2008

Thrombophilia and hypofibrinolysis have been implicated in the pathogenesis of osteonecrosis of the femoral head (ONFH). Tissue factor pathway inhibitor (TFPI), a multivalent protease inhibitor, is an important regulator of the tissue factor-mediated blood coagulation pathway. Mutations of the TFPI gene can increase the risk of thrombin generation and venous thrombosis. The aim of this study was to evaluate the association of TFPI gene polymorphisms with ONFH. All exons and their boundaries of the TFPI gene, including the -1,500 bp promoter region, were directly sequenced in 24 Korean individuals and four sequence variants were identified. These four polymorphisms [-51096 G > A (C-399T), -50984A > G (T-287C), + 24999A > G (Int7 -33T > C), + 37339T > A] were genotyped in 474 ONFH patients and 349 control subjects. The association of genotyped SNPs with ONFH was not found in the present study. The haplotype AAAT of TFPI was significantly associated with total, alcohol-induced, and idiopathic ONFH (p = 0.003, 0.021, and 0.007, respectively), and the haplotype GAAT was significantly associated with total and alcohol ONFH (p = 0.022 and 0.009, respectively). In addition, a new SNP + 37339 T > A in the 3'-UTR of the TFPI gene, was found in the Korean population. To date, this study is the first to show that haplotypes of the TFPI gene are associated with an increased susceptibility for ONFH. The results suggest that genetic variations in TFPI may play an important role in the pathogenesis and risk factors of ONFH.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.1
• /
• pp.195-204
• /
• 2021

Objectives The purpose of this study is to report the effects of Korean medicine treatments including Chuna manual therapy, pharmacopuncture and acupuncture for two patients who have pain in hip joint diagnosed with avascular necrosis of the femoral head. Methods The treatment effect was evaluated with a numeric rating scale (NRS), range of motion (ROM), physical examination (Patrick test), and score of Harris hip score (HHS). Results After treatment, symptoms of the two patients such as hip joint pain and gait dysfunction were improved. The NRS decreased from 8 (right [Rt.]), 7 (left [Lt.]) to 4 (Rt.), 3 (Lt.) in case 1 and from 9 to 2 in case 2. Also the patients showed improvement in ROM and score of HHS increased from 55.5 to 88.5 in case 1 and from 63.5 to 85.5 in case 2. In addition, positive Patrick test improved to negative. Conclusions Korean medicine treatments including Chuna manual therapy, pharmacopuncture and acupuncture can be effective in relieving pain and recovering the fucnction of hip joint associated with avascular necrosis of the femoral head, even when surgery is recommended. Although further study such as controlled studies is needed.

• Korean Journal of Radiology
• /
• v.22 no.12
• /
• pp.2026-2033
• /
• 2021

Objective: The aim of this study was to compare the diagnostic performances of digital tomosynthesis (DTS) and conventional radiography in detecting osteonecrosis of the femoral head (ONFH) using computed tomography (CT), as the reference standard and evaluate the diagnostic reproducibility of DTS. Materials and Methods: Forty-five patients (24 male and 21 female; age range, 25-77 years) with clinically suspected ONFH underwent anteroposterior radiography, DTS, and CT. Two musculoskeletal radiologists independently evaluated the presence and type of ONFH. The diagnostic performance of radiography and DTS in detecting the presence of ONFH and determining the types of ONFH were evaluated. The interobserver and intraobserver reliabilities of each imaging modality were analyzed using Cohen's kappa. Results: DTS had higher sensitivity (89.4%-100% vs. 74.5%-76.6%) and specificity (97.3%-100% vs. 78.4%-83.8%) for ONFH detection than radiography. DTS showed higher performance than radiography in identifying the subtypes of ONFH with statistical significance in one reader (type 1, 100% vs. 30.8%, p = 0.004; type II, 97.1% vs. 73.5%, p = 0.008). The interobserver agreement was excellent for DTS and moderate for radiography (kappa of 0.86 vs. 0.57, respectively). The intraobserver agreement for DTS was higher than that of radiography (kappa of 0.96 vs. 0.69, respectively). Conclusion: DTS showed higher diagnostic performance and reproducibility than radiography in detecting ONFH. DTS may be used as a first-line diagnostic modality instead of radiography for patients suspected of having ONFH.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.200-208
• /
• 2008

Total Hip Replacement(THR) is a surgical procedure that replaces a diseased hip joint with a prosthesis. A plastic or metal cup forms the socket, and the head of the femur is replaced by a metal ball on a stem placed inside the femur. Due to the various types and shapes of human hip joint of every individual, a selected commercial implant sometimes may not be the best-fit to a patient, or it cannot be applied because of its discrepancy. Hence extracting geometry parameters of hip joint is one of the most crucial processes in designing custom-made implants. This paper describes the framework of a methodology to extract the geometric parameters of the hip joint. The parameters include anatomical axis, femoral head, head offset length, femoral neck, neck shaft angle, anteversion, acetabulum, and canal flare index. The proposed system automatically recommends the size and shape of a custom-made hip implant with respect to the patient's individual anatomy from 3D models of hip structures. The proposed procedure creating these custom-made implants with some typical examples is precisely presented and discussed in this paper.