• Nutrition Research and Practice
• /
• v.9 no.1
• /
• pp.57-62
• /
• 2015

BACKGROUND/OBJECTIVES: The prevalence of atopic dermatitis in infants is increasing worldwide. However, the nutrient intake status of infants with atopic dermatitis has not been studied properly. This study was conducted to compare the nutrient intake status of infants in the weaning period with atopic dermatitis by feeding type. MATERIALS/METHODS: Feeding types, nutrient intake status and growth status of 98 infants with atopic dermatitis from age 6 to 12 months were investigated. Feeding types were surveyed using questionnaires, and daily intakes were recorded by mothers using the 24-hour recall method. Growth and iron status were also measured. RESULTS: The result showed that breastfed infants consumed less energy and 13 nutrients compared to formula-fed or mixed-fed infants (P < 0.001). The breastfed group showed a significantly lower intake rate to the Dietary Reference Intakes for Koreans than the other two groups (P < 0.001). In addition, they consumed less than 75% of the recommended intakes in all nutrients, except for protein and vitamin A, and in particular, iron intake was very low, showing just 18.7% of the recommended intake. There was no significant difference in growth by feeding type, but breastfed infants showed a significantly higher rate of iron deficiency anemia (P < 0.001). CONCLUSIONS: Continuous management programs should be prepared for breastfed infants with atopic dermatitis, who are in a period when rapid growth takes place and proper nutrient intake is essential.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.5
• /
• pp.468-473
• /
• 2019

A $2{\times}4$ factorial feeding trial was conducted to examine the effect of feed type and feeding frequency on the performance of sub-adult starry flounder Platichthys stellatus. Two feed types, sinking pellets (SP) and floating pellets (FP), were given to 480 fish housed in tanks. Triplicate groups of fish were fed each feed type at one of four feeding frequencies (one meal every two days, one meal per day, two meals per day, and three meals per day) for nine weeks. Weight gain (WG) and specific growth rate (SGR) of fish were affected by feeding frequency. However, WG and SGR were the same in fish fed SP at two and three meals per day; similarly, there was no difference in WG or SGR of fish fed FP at one meal, two meals, or three meals per day. Feed utilization of fish was affected by both feed type and feeding frequency. These findings suggest that two meals per day of the SP or one meal per day of FP are sufficient for optimum growth performance of sub-adult starry flounder.

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.1-14
• /
• 1980

Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

• Journal of the Korean Society of Combustion
• /
• v.10 no.2
• /
• pp.26-34
• /
• 2005

The performance of oxygen combustion with $CO_2$ feeding was investigated in a pyrex tube furnace. The inverse type multi-hole burner was used for improving mixing and wide operating range. It introduced oxygen, fuel, and oxygen, respectively, from center tube to outer tubes. Oxygen combustion characteristics with excess oxygen ratio, oxygen feeding ratio, and $CO_2$ feeding flow rate were studied to optimize the operating condition and to apply the oxygen combustion with recirculation of flue gas to a real furnace. This paper presents results on the effect of $CO_2$ feeding flow rate on the structure of the flames and concentrations of NO and CO emissions. The visible flame length was shortest due to well mixing between fuel and oxygen when the oxygen feeding ratio was 0.25. The NO emission was reduced drastically regardless of excess oxygen ratio when the $CO_2$ feeding flow rate was larger than 15 lpm. The CO emission is varied by changing the $CO_2$ feeding flow rate but the CO emission characteristics is highly affected by excess oxygen ratio. When the excess oxygen ratio is below $\lambda=1.1$, the CO emission increased as the $CO_2$ feeding flow rate increased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1174-1183
• /
• 2010

In goats fed on dry forage twice a day, an esophageal fistula was used to investigate the physiological factors present in the marked suppression of dry forage intake that occurs after 40 min of feeding. The animals used in this study were five large-type male esophageal- and ruminal-fistulated goats. Roughly crushed alfalfa hay cubes with any large remaining chunks removed were used as feed for this research. The study was conducted under both normal feeding conditions (NFC) and sham feeding conditions (SFC). In the NFC control, the esophageal fistulae were closed by plugs and the animals ate dry forage in the normal manner. In the SFC treatment, before starting the experiment the plugs for closing the esophageal fistula were removed and the cannulae for collecting boluses were fitted into the fistulae. Therefore, the esophageal boluses were removed via an esophageal fistula before they entered the rumen. In the NFC control, eating rates sharply decreased in the first 40 min of feeding and were subsequently maintained at low levels. However, eating rates in the SFC treatment remained high after 40 min of the feeding period had elapsed and the goats ate continuously during the 2 h feeding period. In comparison with the NFC control ($1,794{\pm}203.80\;g$/2 h), cumulative dry forage intake in the SFC treatment ($3,182{\pm}381.69\;g$/2 h) was 77.4% greater (p<0.05) upon conclusion of the 2 h feeding period. In the SFC treatment, cumulative bolus output ($6,804{\pm}469.92\;g$/2 h) was about twofold the cumulative dry forage intake due to cumulative salivary secretion volume ($3,622{\pm}104.13\;g$/2 h) upon conclusion of the 2 h feeding period. The result indicates that large amounts of secreted saliva during dry forage feeding act in conjunction with consumed feed to form the ruminal load responsible for ruminal distension. The increased plasma total protein concentrations were higher in the SFC treatment than in the NFC control. However, plasma and ruminal fluid osmolalities increased in the NFC control during and after feeding but were mostly unchanged in the SFC treatment. In comparison with the NFC control ($3,440{\pm}548.04\;g$/30 min), thirst level in the SFC treatment ($1,360{\pm}467.02\;g$/30 min) was 60.5% significantly less (p<0.05) upon conclusion of the 30 min drinking period. The results of the present study indicate that In the second hour of the 2 h feeding period, dry forage intake is regulated by factors produced when boluses enter the rumen.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.37-47
• /
• 1998

This study discusses the feed dog feeding mechanism of an industrial lock stitch sewing machine, which is a good example to study a machine kinematics. The feed dog feeding mechanism makes the fabrics directly be fed by an elliptic motion of the feed dog that is moved by a rotation of the top shaft and controlled by the feeding control mechanism. This study makes mathematical expressions of machine's motion in the feed dog feeding mechanism. Thus, the motions of this mechanism are characterized, namely how an elliptic motion of the feed dog is affected by the feeding control mechanism. Therefore, the above mathematical expressions may be a basis for the new design of the feed dog feeding mechanism and may be adapted to analysis. Development of the similar feed dog feeding mechanism can be applied to other type sewing machine.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.48-54
• /
• 1998

In sewing, fabrics is fed by an elliptic motion of the feed dog. The feeding control mechanism controls an elliptic motion of the feed dog, finally, controls stitch spacings and feeding directions of fabrics. This study discusses the feeding control mechanism of an industrial lock stitch sewing machine, which is a good example to study a machine kinematics. This study makes mathematical expressions of machine's motion in the feeding control mechanism. Thus, the motions of this mechanism are characterized, which will be used for kinematic analysis of the feed dog later. Also, the above mathematical expressions may be a basis for the new design of the feeding control mechanism and may be applied to development of the similar feeding control mechanism of other type sewing machine.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.8
• /
• pp.1069-1085
• /
• 2011

In large-type goats that were fed on dry forage twice daily, dry forage intake was markedly suppressed after 40 min of feeding had elapsed. The objective of this study was to clarify whether or not increases in plasma osmolality and subsequent thirst sensations produced by dry forage feeding suppress dry forage intake. Eight large-type male esophageal- and ruminal-fistulated goats (crossbred Japanese Saanen/Nubian, aged 3 to 6 years, weighing $72.3{\pm}2.74$ kg) were used in two experiments conducted under sham feeding conditions. The animals were fed ad libitum a diet of roughly crushed alfalfa hay cubes for 2 h from 10:00 to 12:00 h during two experiments. Water was withheld during feeding in both experiments but was available for a period of 30 min after completion of the 2 h feeding period. In experiment 1, an intraruminal infusion of artificial parotid saliva (RIAPS) in the control replenished saliva lost via the esophageal fistula and an intraruminal infusion of hypertonic solution (RIHS) in the treatment was carried out in order to reproduce the effects of changing salt content due to feed entering the rumen. In experiment 2, the RIHS control was conducted in the same manner as the RIHS treatment of experiment 1. The treatment group consisted of RIHS-with an intravenous infusion of artificial mixed saliva (VIAMS) treatment that was carried out for 3 h to prevent increases in plasma osmolality during feeding. The results of the RIHS treatment in experiment 1 showed that ruminal fluid osmolality increased and then an increase in plasma osmolality was observed. This resulted in the production of thirst sensations and the reduction of cumulative dry forage intake to 43.3% (p<0.05) of the RIAPS control. The results of the RIHS-VIAMS treatment in experiment 2 indicated that ruminal fluid osmolality was the same as the RIHS control but plasma osmolality significantly decreased, and thirst level was markedly reduced. This caused a significant increase of 31.4% (p<0.05) in cumulative dry forage intake in the RIHS-VIAMS treatment compared to the RIHS control. These results indicate that increases in ruminal fluid osmolality during dry forage feeding indirectly suppresses dry forage intake by causing an increase in plasma osmolality and subsequently inducing thirst sensations. The results of the present study suggest that marked decreases in dry forage intake after 40 min of feeding are caused by increases in plasma osmolality and subsequent thirst sensations produced by dry forage feeding.

• Women's Health Nursing
• /
• v.1 no.2
• /
• pp.155-173
• /
• 1995

The purpose of this research was to obtain information about the performance of breast-feeding by employed mother and the supportive accommodation in the work place. The survey questionnaire was answered by 323 employed mothers who had child over the six months and visited the pediatric clinic in the hospital and the public health center in Seoul. The results were as follows : 1. Of the 323 employed mothers, 4.7% of mothers performed breast-feeding, 58.3% of mothers did artificial-feeding and 37% of mothers did mixed-feeding during the six months after birth of baby. 2. The characteristics of employed mothers found to be related breast-feeding include Age, Education, Number of Baby, Type of Delivery, Place of Delivery, Obtaining Information On Breast-Feeding. 3. The performance of breast-feeding during the work was different significantly according to the mother's job(medical and non-medical) and the method of feeding. 4. The reasons why they could not perform the breast-feeding include not enough time because of working(80.4%) and lack of knowledge about breast-feeding method with combining employment. 5. The results showed that the rest supports of the work environment was insufficient to perform breast-feeding in he workplace except maternal leave.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.4
• /
• pp.338-347
• /
• 2023

Objectives: Young children's feeding characteristics can play an important role in eating habits and health during later childhood. This study was conducted to examine the associations of feeding characteristics with dietary patterns and obesity in children. Methods: This study utilized data from the Korea National Health and Nutrition Examination Survey conducted between 2013 and 2017. In total, 802 toddlers were included, with information on their demographic characteristics, feeding practices and duration, and 24-hour recall obtained from their parents. Feeding characteristics were categorized into feeding type, duration of total breastfeeding, duration of total formula feeding, duration of exclusive breastfeeding, and age when starting formula feeding. Dietary patterns were identified based on factor loadings for the food groups for 3 major factors, with "vegetables & traditional," "fish & carbohydrates," and "sweet & fat" patterns. Overweight/obesity was defined as ≥85th percentile in body mass index based on the 2017 Korean National Growth charts for children and adolescents. Multiple regression analysis was conducted to examine associations between feeding characteristics and dietary patterns. The association between dietary patterns and obesity was analyzed using multivariable logistic regression analysis. Results: The early introduction of formula feeding was inversely associated with the "vegetables & traditional" pattern (β=-0.18; 95% confidence interval [CI], -0.34 to -0.02). A higher "vegetables & traditional" intake was associated with a lower risk of obesity (odds ratio, 0.48; 95% CI, 0.24 to 0.95). Conclusions: Feeding characteristics are associated with dietary patterns in later childhood, and dietary patterns were shown to have a potential protective association against obesity.