• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.372-377
• /
• 2011

The feeding habits of the redbanded searobin Lepidotrigla guentheri were studied using 186 specimens collected from September to November, 2006, in the coastal waters off Gori, Korea. The sizes of L. guentheri ranged from 7.1 to 16.7 cm total length(TL). L. guentheri is a bottom-feeding carnivore that consumes mainly shrimp, especially Leptochela sydniensis, amphipods, and crabs. Its diet also includes small quantities of stomatopods, mysids, cumaceans, euphausiids, polychaetes, and copepods. Our feeding-strategy graphical method reveled that L. guentheri is a specialized feeder, with a narrow niche width. L. guentheri mainly consumed shrimp of all size classes and did not show significant ontogenetic changes in feeding habits. Smaller individuals(7-11 cm TL) secondly consumed amphipods, with the portion of amphipods in the total diet decreasing as body size increased. Prey size increased significantly as the fish grew in size.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.250-253
• /
• 2000

We researched effects of growth on initial inoculum size, liquid volume, and medium feeding rate etc. Cell suspension inoculated at low cell concentrations showed a typical growth reduction, whereas root cultures showed an improvement in growth. In this paper, Hairy roots showed high growth rate at 0.4 % inoculum size and 100 mL liquid volume in 250 mL flask cultures.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.258-259
• /
• 2012

This paper proposes a new control strategy to eliminate the harmonic components of stator current for stand-alone DFIG system feeding non-linear loads. In this method, the LSC operates as an active filter which is controlled by employing a proportional-integral and a resonant controller. And also, the stator current is used as the feedback signal for the compensator instead of the load current, so that the additional current sensor at the load side can be removed. The experiment is verified to validate the effectiveness of the proposed compensating method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1240-1252
• /
• 2015

The purpose of this study was to investigate feeding difficulty and its influencing factors of elders with dementia in long-term care facilities. Participants were 158 elders with dementia residing in three nursing facilities. Data were collected from Aug. 18 to Sep. 12 in 2014. The feeding difficulty in dementia scale, Korean version-Activities of Daily Living and Mini-Mental State Exam-Korean version were used as instruments. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson correlation and stepwise multiple regression by SPSS 17.0. Mean feeding difficulty score was $0.62{\pm}0.43$(range of 0-2). The highest feeding difficulty item was "patient require close supervision while feeding". The variables influencing the feeding difficulty was ADL(${\beta}=.312$), cognitive function(${\beta}=-.172$) which explained about 20.0% of total variance. The results suggest the need of developing feeding difficulty coping strategy according to dietary behavior phase, In addition, the development and testing the educational program for caregivers to help feeding difficulty of the elders with dementia in long-term facility are recommended.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.11 no.sup1
• /
• pp.143-148
• /
• 2008

It is relatively common to have various feeding problem during infancy and childhood, even for typically developing children. Treatment outcome studies for pediatric feeding disorder consistently reported that applied behavior analaysis (ABA), a type of behavior intervention, is very effective and efficacious. Interdisciplinary team approach is necessary for severe feeding problems, but similar methods could be used through parent training for moderate and mild feeding problems. This article introduced assessment procedure to identify feeding problems as well as specific methods to deal with diver feeding issues. Each strategy can be used effectively only when it is combined with several other strategies including environmental rearrangement and should be developed individually upon each child's feeding issues. In addition, systematic and continuous parent trainings are mandatory. At the end, several treatments related issues were addressed.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.7
• /
• pp.902-910
• /
• 2022

The ginsenoside compound K (C-K) is widely used in traditional medicines, nutritional supplements, and cosmetics owing to its diverse pharmacological activities. Although many studies on C-K production have been conducted, fermentation is reported to produce C-K with low concentration and productivity. In the present study, addition of an inducer and optimization of the carbon and nitrogen sources in the medium were performed using response surface methodology to increase the C-K production via fermentation by Aspergillus tubingensis, a generally recognized as safe fungus. The optimized inducer and carbon and nitrogen sources were 2 g/l rice straw, 10 g/l sucrose, and 10 g/l soy protein concentrate, respectively, and they resulted in a 3.1-fold increase in the concentration and productivity of C-K (0.22 g/l and 1.52 mg/l/h, respectively) compared to those used before optimization without inducer (0.071 g/l and 0.49 mg/l/h, respectively). The feeding methods of American ginseng extract (AGE), including feeding timing, feeding concentration, and feeding frequency, were also optimized. Under the optimized conditions, A. tubingensis produced 3.96 mM (2.47 g/l) C-K at 144 h by feeding two times with 8 g/l AGE at 48 and 60 h, with a productivity of 17.1 mg/l/h. The concentration and productivity of C-K after optimization of feeding methods were 11-fold higher than those before the optimization (0.22 g/l and 1.52 mg/l/h, respectively). Thus, the optimization for the feeding methods of ginseng extract is an efficient strategy to increase C-K production. To our knowledge, this is the highest reported C-K concentration and productivity via fermentation reported so far.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.1
• /
• pp.76-81
• /
• 2012

The feeding habits of daggertooth pike conger Muraenesox cinereus were studied using 380 specimens collected in the coastal waters off Goseong, Korea, from June to September, 2011. The M. cinereus ranged from 10.0-23.7 cm in anal length (AL). M. cinereus is a piscivore that consumes mainly fish. Engraulis japonicus was the preferred prey, but its diet also included small numbers of crabs, shrimps, cephalopods, and bivalves. The feeding strategy graphical method revealed that M. cinereus is a specialized feeder with a narrow niche width. All size classes of M. cinereus consumed fish and M. cinereus did not show significant ontogenetic changes in feeding habits. The diet overlap index between size classes was >0.96, indicating high diet similarities. The prey size increased significantly with M. cinereus size.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1370-1376
• /
• 2015

Generally, an autotransformer(AT) feeding system consists of double tracks, up and down, with the trolley wire and feeder wire of the up and down tracks connected in the sectioning post(SP). Consequently, load current or fault current flows on two tracks based on catenary impedance characteristics, making it difficult to estimate catenary impedance accurately. This paper presents a technique for the estimation of catenary impedance using boosting current compensation based on the current division characteristics of an AT feeding system to improve the operation performance of impedance relay. To verify the technique, we model an AT feeding system through a power analysis program (PSCAD/EMTDC) and simulate various operation and fault conditions. Through the simulation, we confirmed that the proposed technique has estimated catenary impedance with a similar degree of accuracy to the actual catenary impedance

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.5
• /
• pp.340-344
• /
• 2000

Microbial oxidation of D-sorbitol to L-sorbose by Acetobacter suboxydans is of commercial importance since it is the only biochemical process in vitamin C synthesis. The main bottleneck in the batch oxidation of sorbitol to sorbose is that the process is severely inhibited by sorbitol. Suitable fed-batch fermentation designs can eliminate the inherent substrate inhibition and improve sorbose productivity. Fed-batch sorbose fermentations were conducted by using two nutrient feeding strategies. For fed-batch fermentation with pulse feeding, highly concentrated sorbitor (600g/L) along with other nutrients were fed intermittently in four pulses of 0.5 liter in response to the increased DO signal. The fed-batch fermentation was over in 24h with a sorbose productivity of 13.40g/L/h and a final sorbose concentration of 320.48g/L. On the other hand, in fed-batch fermentation with multiple feeds, two pulse feeds of 0.5 liter nutrient medium containing 600g/L sorbitol was followed by the addition of 1.5 liter nutrient medium containing 600g/L sorbitol at a constant feed rate of 0.36L/h till the full working capacity of the reactor. The fermentation was completed in 24h with an enhanced sorbose productivity of 15.09g/L/h and a sorbose concentration of 332.60g/L. The sorbose concentration and productivity obtained by multiple feeding of nutrients was found to be higher than that obtained by pulse feeding and was therefore a better strategy for fed-batch sorbose fermentation.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.1
• /
• pp.59-69
• /
• 2014

One of the major challenges in metabolic engineering for enhanced synthesis of value-added chemicals is to design and develop new strains that can be translated into well-controlled fermentation processes using bioreactors. The aim of this study was to assess the influence of various fed-batch strategies in the performance of metabolically engineered Pseudomonas putida strains, ${\Delta}gcd$ and ${\Delta}gcd-pgl$, for improving production of medium-chain-length polyhydroxyalkanoates (mcl-PHAs) using glucose as the only carbon source. First we developed a fed-batch process that comprised an initial phase of biomass accumulation based on an exponential feeding carbon-limited strategy. For the mcl-PHA accumulation stage, three induction techniques were tested under nitrogen limitation. The substrate-pulse feeding was more efficient than the constant-feeding approach to promote the accumulation of the desirable product. Nonetheless, the most efficient approach for maximum PHA synthesis was the application of a dissolved-oxygen-stat feeding strategy (DO-stat), where P. putida ${\Delta}gcd$ mutant strain showed a final PHA content and specific PHA productivity of 67% and $0.83g{\cdot}l^{-1}{\cdot}h^{-1}$, respectively. To our knowledge, this mcl-PHA titer is the highest value that has been ever reported using glucose as the sole carbon and energy source. Our results also highlighted the effect of different fed-batch strategies upon the extent of realization of the intended metabolic modification of the mutant strains.