• Journal of Industrial Technology
• /
• v.14
• /
• pp.109-117
• /
• 1994

To satisfy the requirement for the precision and productivity of machine tools, we need the technique to predict the surface roughness of workpiece under various cutting conditions. The surface roughness is mainly influenced by the ideal roughness i. e., the roughness by feeding quantity and geometry of the tool. In this paper, the surface roughness is divided into three zones and the mathematical models of the three zones are obtained, in consideration of the feeding conditions and tool geometry. Using the mathematical models, we developed a program to calculate the maximum feeding quantity satisfying the required surface roughness of the workpiece. The program is used to calculate the maximum feed for two kinds of the bites used under the real cutting condition.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.630-633
• /
• 2000

The damage by the black-tipped sawfly, Acantholyda posticalis posticalis, has been increasing all over the area of Korean pine(Pinus koraiensis)stands in Korean peninsula. This study was conducted to provide basic information for the management and control of this pest by investigating the feeding quantity of pine needles during the larval stage. The results were summarized as follows : The total needles damaged in the larval stage of the black-tipped sawfly were 9,584mm in length on an average and those of female and male were 11,774mm and 7,394mm, respectively. The total length ingested actually was 7,797mm and it was equivalent to 81.4% of the total length damaged. Early larval stage showed a little feeding and it was equivalent to 17% of total quantity. On the contrary, the feeding quantity in late larval stages of fourth and fifth instars amounted to 83%. The number of the frass excreted per larva was about 1,160, and the difference between male and female was not showed, whereas it showed remarkable difference among larval instars.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.527-532
• /
• 1992

The present paper describes temporal changes of immunohistochemical localization and quantities of carbonic anhydrase isozyme II (CA-II) prochymosin (PC) and pepsinogen (PN) in goat's abomasal mucosae during long term milk feeding. The CA-II was not detected by day 14 after birth and then became positive on day 34 in the parietal cells, suggesting that the excretion of the hydrochloric acid (HCl) begins between days 14 and 34 under a feeding condition without solid materials. The quantity of the PC in the gastric chief cells detected by the ELISA showed rapid increase from the day of birth, making a peak on day 8 and then gradually decreased with age. The decrease in quantity of PC became started during the time period when HCl excretion had not started yet. The quantities of PN in the gastric chief cells were almost stable during the whole period examined. Expressions of these gastric enzymes did not seem to be regulated by the change of feeding condition.

• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.128-131
• /
• 2001

Laser cladding processing allows rapid transfer of heat to the material being processed with minimum conduction into base metal, resulting in low total heat input. The effects of $CO_2$ laser cladding with powder feeding on mechanical properties of VERSAlloy were studied. Their low melting point (under 1093$^{\circ}C$) enables overlays to be applied with minimum dilution and base metal distortion. Experiment results indicated that powder feeding speed and quantity were important for laser cladding with powder feeding. The powder feeding speed should be adapted according to cladding speed for good shaping of clad layer. The effect of heat on the HAZ size can be limited and the growth of grain size of HAZ size was not serious.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.213-216
• /
• 2002

Food consumption and conversion efficiency of new bivoltine hybrids (CSR2$\times$CSR4 and CSR2$\times$CSR5) were studied under restricted feeding levels (10, 20 and 30% less quantity of mulberry leaves). The data were compared with a control fed with standard quantum of feed as per the recommendation. The nutritional indices parameters i. e. ingests, digesta, approximate digestibility (%) and reference ratio were recorded higher in control batches compared to less feed batches while nutritional efficiency parameters i. e., ECI and ECD to cocoon and shell were recorded significantly higher in restricted feeding level batches. This increase is attributed due to the physiological adaptation under nutritional stress condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.522-527
• /
• 2003

Feeding habits of Limanda yokohamae collected from the eelgrass bed in Kwangyang Bay were studied. L. yokohamae (1-16 cm SL) was a carnivore which consumed mainly polychaetes. Its diets included a significant quantity of amphipods (gammarids and caprellids) as well as small quantities of gastropods and ophiuroids. L. yokohamae showed ontogenetic changes in feeding habits. Small individuals less than 4 cm SL preyed mainly on amphipods. However, polychaetes were heavily selected with increasing fish size while the portion of the diet attributable to amphipods decreased sharply. Polychaetes were the major prey organisms for all seasons. Dietary breadth of each size class shows relatively low value, and this means that L. yokohamae depends on only few kinds of food organisms.

• Journal of Aerospace System Engineering
• /
• v.4 no.1
• /
• pp.10-14
• /
• 2010

The Fuel system of T-50 Advanced Trainer is equipped with two boost pump and fuel flow proportioner for feeding fuel to turbo jet engine. when an unexpected failure occurs, they can feed the fuel to turbo jet engine which fuel quantity required. fuel quantity control method is applied for minimizing the center of gravity change. and fuel quantity control method is controlled by FQMS(Fuel Quantity Measuring System) and FFP(Fuel Flow Proportioner). This paper presents life cycle extension plans of FFP hydraulic motor by design improvements of connecting and arrangement of pipe comparing with KF-16.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.2
• /
• pp.293-297
• /
• 2018

Controlling the residual glucose concentration is important for improving productivity in $\text\tiny{L}$-threonine fermentation. In this study, we developed a procedure to automatically control the feeding quantity of glucose solution as a function of ammonia-water consumption rate. The feeding ratio ($R_{C/N}$) of glucose and ammonia water was predetermined via a stoichiometric approach, on the basis of glucose-ammonia water consumption rates. In a 5-L fermenter, 102 g/l $\text\tiny{L}$-threonine was obtained using our glucose-ammonia water combined feeding strategy, which was then successfully applied in a 500-L fermenter (89 g/l). Therefore, we conclude that an automatic combination feeding strategy is suitable for improving $\text\tiny{L}$-threonine production.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.77-82
• /
• 2010

These days our coasts have been damaged by the polluted water resulting from the construction of industry on the shore, increasing population and urbanization. The destruction of ecosystem has induced many problems to aquaculture such that it raises the production cost of aquatic products for eating. For solving these problems aquafarm has been moving to the land. This paper intends to describe the automatic feeding system for the inland fish farm. An existent automatic feeding system has problems such that feed quantity is not accurate and feed itself is broken by feed motor. But a proposed system in this paper is more accurate than the existent system in view of feed quantity by using the combination of valve and load-sell. Resultantly, the system can safely transfer feed to inland nursery tank. Through several experiments using a real system, the effectiveness of the proposed system is verified under all conditions.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.312-315
• /
• 2005

A process for efficient recycle fed-batch culture was carried out to increase cell mass and spore production by Lactic acid bacteria isolated from Kimchi. A large quantity of cell mass obtained by feeding concentration of sugar in recycle fed-batch culture. When the high density of salt was created that the cell mass was come-down. In this study, cultured in different feeding concentration of sugar conditions. Lactic acid bacteria by recycle fed-batch culture was investigated in 2L working volume of fermenter, obtained the maximum cell mass was 15.17g/L.