• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.19.2-19.2
• /
• 2010

Printed electronics using printing process has broadened in all respects such as electrics (lighting, batteries, solar cells etc) as well as electronics (OLED, LCD, E-paper, transistor etc). Copper is considered to be a promising alternative to silver for printed electronics, due to very high conductivity at a low price. However, Copper is easily oxidized, and its oxide is non-conductive. This is the highest hurdle for making copper inks, since the heat and humidity that occurs during ink making and printing simply accelerates the oxidation process. A variety of chemical treatments including organic capping agents and metallic coating have been used to slow this oxidation. We have established synthetic conditions of copper nanoparticles (CuNPs) which are resistant to oxidation and average diameter of 20 to 50nm. Specific resistivity should be less than $4\;{\mu}{\Omega}{\cdot}cm$ when sintered at lower temperature than $250^{\circ}C$ to be able to apply to conductive patterns of FPCBs using ink-jet printing. Through this study, the parameters to control average diameter of CuNPs were found to be the introduction of additive agent, the feeding rate of reducing agent, and reaction temperature. The CuNPs with various average diameters (58, 40, 26, 20nm) could be synthesized by controlling these parameters. The dispersed solution of CuNPs with an average size of 20 nm was made with nonpolar solvent containing 3 wt% of binder, and then coated onto glass substrate. After sintering the coated substrates at $250^{\circ}C$ for 30 minutes in nitrogen atmosphere, metallic copper film resulted in a specific resistivity of $4.2\;{\mu}{\Omega}{\cdot}cm$.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2001.11b
• /
• pp.25-32
• /
• 2001

Potatoes have been recognized for a long time as one of the major food crops as well as horticultural crops. Potato production as a table food has been decreased in developed countries, while it has been steadily increased in the third world countries for it importance as food source. It is a new trend to look for the food, not only as a feeding crop but also healthy food. It is also time for the potato producers to look for the potato having high economic value as found in medicinal plants. There are great diversities in potato species, indicating that valuable compounds can be found in different amounts, depending on potato species. We screened the cultivars, breeding clones, and germplasms based on the vitamin C, Vitamin E, antioxidant compounds, diverse sugar types, important amino acids, and other valuable compounds. We could select the breeding clones KC003, 98Wl17, 99j717, and Vally 8 (A group) due to their high levels of antioxidant compounds, and it can be said that most of the red and purple colored potato clones belong to the A group. In the contents of essential amino acids, ‘Taebook Valley’,‘Summer Valley’ and other breeding clones were found to be high in amount. We also made crosses between breeding clones with high biological function and low agronomic traits and low biological function with high quality in agronomic characteristics . The patterns of genetic trends of these offsprings in comparison with their parents will be reported as well. And the potential of using potato as antibody production of anti-cancer will be discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.713-722
• /
• 2000

This study analysed error of measurement and reproducibility for particle size analysis by the laser diffraction spectrometer. Laser diffraction spectrometers has become a very important method of particle size analysis. This measuring method has the advantage of simple operation, good reproducibility and rapid analysis. A feeding and dispersing system have been developed, which allows mass throughputs between 0.1~23 g/min in flowing air and 1.4~35% in flowing liquid. It has been used as a feeder unit for wet and dry particle size analysis from diffraction patterns. Relevant parameters, such as particle shape, particle size, dispersion, flow rate, concentration were analysed for measuring error. And system parameters of instruments for measurement of dynamic processes, eg, measuring time, focal plane, injection pressure drop and dispersion effect by the ultrasonic and mixing of preliminary treatment, were also discussed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.175-181
• /
• 1998

The relation between lipid peroxidation and thrombotic reaction were investigated in streptozotocin (STZ)-induced diabetic rats. Sprague-Dawley male rats weighing 100$\pm$10gm were randomly assigned to normal and STZ-induced diabetic group(DM). Diabetes was experimentally induced by intravenous injection of 55mg/kg of body weight of STZ in citrate buffer(pH 4.3) after 4 weeks feeding of basal diet. Animals were sacrificed at the 6th day of diabetic states. Body weight gains were lower in diabetic group after STZ injection. Serum levels of thiobarbituric acid reacting substances(TBARS) that were markedly increased in DM group compared with of normal group. TBARS levels of HDL and LDL were similar patterns to total TBARA of serum. Activities of platelet phospholipase A2(PLA2) were higher in diabetic group than those of normal group. Activities of platelet cyclooxygenase were 106% in DM group than normal group. Platelet thromboxane A2(TXA2) formation was increased in DM group than normal group. Production of aortic prostacyclin(PGI2) was lower in diabetic group than that of normal group. PGI2/TXA2 ratios were decreased by 55% in DM groups than those of normal group. The present results indicate that STZ-induced diabetic rats are more sensitive to oxidative stess which leads to acceleration of lipid peroxidation and platelet aggregability. In conclusion, accelerating effect of lipid peroxidation and thrombogenesis in diabetic state is regareded to be resulted from enhancement of PLA2 activity and arachidonic acid metabolism, inhibition of antiaggrgating agent and aortic PGI2 formation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.156-162
• /
• 2016

This paper proposes a novel orthogonally-polarized dual-band switchable microstrip antenna. The proposed antenna consists of a perpendicular feeding network and an radiator with a PIN-installed H-shaped slot. When the states of one single PIN diode in H-slot are controlled by bias voltages, the controlled physical geometry of the H-slot determines the operation frequencies of switchable 1.80 GHz and 2.43 GHz for vertically polarized linear polarization and fixed 2.06 GHz for horizontally linear polarization. The implemented antenna experimentally demonstrates reconfigurable dual-band capability by means of controling the states of the PIN diode. The simulation and measurement results of the implemented antenna have been in good agreement with the reflection coefficients, realized antenna gains and far-field radiation patterns at each of the PIN diode states.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.131-139
• /
• 2011

In this paper, we propose a double-faced window printed antenna for aircraft applications. The proposed antenna structure consists of a feeding line and a multi-loop radiator located on different sides of the window to use the limited given-area effectively. The proposed antenna is optimized by the genetic algorithm in conjunction with the FEKO EM simulator. The optimized antenna is built and installed on a 1/10 sized KUH-Surion mock-up and antenna performances such as the reflection coefficient and the radiation patterns are measured. The optimized antenna shows a half power matching bandwidth of about 33 % at 60 MHz and an average bore-sight gain of about -3.49 dBi. To verify the reception capability of the optimized antenna, we simulated the received power according to a flight scenario. The result confirms that the optimized antenna shows a minimum received power level above -60 dBm at a range of 200 km, which is similar to the pole antenna that is currently used as a FM voice antenna for KUH-Surion.

• BMB Reports
• /
• v.44 no.6
• /
• pp.387-392
• /
• 2011

To investigate the molecular scavenging capabilities of the larvae of Hermetia illucens, two serine proteases (SPs) were cloned and characterized. Multiple sequence alignments and phylogenetic tree analysis of the deduced amino acid sequences of Hi-SP1 and Hi-SP2 were suggested that Hi-SP1 may be a chymotrypsin- and Hi-SP2 may be a trypsin-like protease. Hi-SP1 and Hi-SP2 3-D homology models revealed that a catalytic triad, three disulfide bonds, and a substrate-binding pocket were highly conserved, as would be expected of a SP. E. coli expressed Hi-SP1 and Hi-SP2 showed chymotrypsin or trypsin activities, respectively. Hi-SP2 mRNAs were consistently expressed during larval development. In contrast, the expression of Hi-SP1 mRNA fluctuated between feeding and molting stages and disappeared at the pupal stages. These expression pattern differences suggest that Hi-SP1 may be a larval specific chymotrypsin-like protease involved with food digestion, while Hi-SP2 may be a trypsin-like protease with diverse functions at different stages.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.40-46
• /
• 2002

In this paper we design and fabricate the Skeleton slot antenna which operates dually in GSM 900 and 1800 bands. Its simulation results are also compared with the measured ones. The original Skeleton slot antennas had the problems of unsatisfactory VSWR characteristics and considerably changing horizontal radiation patterns at high frequencies, but the proposed design improves these problems using multi-path feeding network and folding structure. The size of the radiator is 154 $\times$ 106(mm), and its height is 33(mm), and the reflector of 190$\times$190(mm) is used. The material of the radiator and reflector is 1mm-thick aluminum. Using NTC process reduces the mass production cost significantly. The measured return losses are 13.7 % at 900 MHz band and 16.4 % at 1800 MHz band, respectively. The horizontal radiation beam width is stable within $\pm$ 1$^{\circ}$ at both frequency bands.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.3
• /
• pp.117-124
• /
• 2000

A systolic array is a parallel processing system which consists of processing elements of basic computation capabilities, connected with regular and local communication lines. It has been known that a systolic array is on of effective systems to solve complicated communication problems occurred between densely connected neurons on ANN(Artificial Neural Network). In this paper, a systolic array simulator for the back-propagation ANN, which automatically constructs the proper systolic array for a given number of neurons of the ANN, is designed and constructed. With animation techniques of the simulators, it is easy for users to be able to examine the execution of the back-propagation algorithm on the designed systolic array step by step. Moreover the simulator can perform forward and backward operations of the back-propagation algorithm either in sequence or in parallel on the designed systolic array. Parallel execution can be performed by feeding continuous input patterns and by executing bidirectional propagations on all of processing elements of a systolic array at the same time.

• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1870-1878
• /
• 2021

Objective: The objective of this experiment was to investigate the effects of different colors produced by light emitting diode (LED) on Brown Tsaiya ducks. Methods: A total of 144 female Brown Tsaiya ducks were randomly allocated into three individual cage rearing chambers with different LED illumination colors as treatments. Three different treatments were: i) white color, ii) blue color, and iii) red color. The experiment periods were from ducks 21 to 49 weeks of age, determined traits included i) egg laying performance, ii) feed intake, iii) egg shell breaking strength, iv) egg shell thickness, v) egg Haugh unit, vi) egg weight, vii) serum Estradiol and Progesterone concentration, and viii) behavior pattern. Results: The results indicated that when compared with white and blue color, red color could stimulate ducks sexual maturation and raised the egg laying performance. The red light group was also observed to have the highest feed intake among three treatments. The blue treatment had the lowest egg shell breaking strength and the highest egg weight among three treatments, nevertheless, no significant difference was observed among three treatments on egg shell thickness and egg Haugh unit. The red light group had higher serum estradiol concentration than the white and blue groups, but no significant difference among treatments on the serum Progesterone concentration was found. The results of behavior pattern indicated that red light group showed more feeding and less resting behavior compared to the blue light group. Conclusion: We found a potential of applying red light illumination in the indoor laying duck raising system with positive results on egg laying performance and acceptable egg weight, equivalent egg qualities compared to white and blue light.