• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1321-1325
• /
• 2013

In this paper, we proposed an air bearing stage with active magnetic preloads in vertical directions compensating motion errors and attenuating vibrations to improve dynamic characteristics. This preloaded design gives simpler configuration of the stage, and active control of preload can be used for compensating motion errors by feedforward method. To improve dynamic characteristics, vibration of the table is monitored by an accelerometer, and controlled by a DSP based digital controller with integrator and band pass filters for suppressing roll and pitch vibration modes. The modes were evaluated by measuring frequency response functions, and compared with compensated responses. This showed effective results for suppressing poorly damped regenerative vibration of air bearings.

• 한국미생물·생명공학회지
• /
• 제21권4호
• /
• pp.354-365
• /
• 1993

A novel control method with automatic tuning of PID controller parameters has been developed for efficient regulation of dissolved oxygen concentration in fed-batch fermentations of Escherichia coli. Agitation speed and oxygen partial pressure in the inlet gas stream were chosen to be the manipulated variables. A heuristic reasoning allowed improved tuning decisions from the supervision of control performance indices and it coule obviate the needs for process assumptions or disturbance patterns. The control input consisted of feedback and feedforword parts. The feedback part was determined by PID control and the feedforward part is determined from the feed rate. The proportional gain was updated on-line by a set of heuristics rules based on the supervision of three performance indices. These indices were output error covariance, the average value of output error, and input covariance, which were calculated on-line using a moving window. The integral and derivative time constants were determined from the period of output response. The specific growth rate was maintained at a low level to avoid acetic acid accumulation and thus to achieve a high cell density. The specific growthe rate was estimated from the carbon dioxide evolution rate. In fed-batch fermentation, the simutaneous control of dissolved oxygen concentration (at 0.2; fraction of saturated value) and specific growth rate (at 0.25$hr^{-1}$) was satisfactory for the entire culture period in spite of the changes in the feed rate and the switching of control input.

• 조명전기설비학회논문지
• /
• 제19권1호
• /
• pp.70-79
• /
• 2005

본 논문은 축소차원 상태방정식을 사용한 전차원 관측기를 이용하여 저속도 영역에서의 운전 성능 개선방법을 제안하였다. 축소차원 상태방정식을 사용한 전차원 관측기는 간단한 모터속도 및 외란토크 관측기이다. 제안한 알고리즘은 약 1.9[rpm]의 저속도에서 매우 안정적인 결과를 보였다. 모터구동 시스템에서 외란토크는 저속도 영역에서 속도제어 성능을 저하시킨다. 제안한 알고리즘은 모터속도와 외란토크를 모두 추정한다. 추정된 외란 토크는 속도제어기의 출력에 전향보상 값으로 사용되며, 그 결과 저속도 영역(1.9rpm)에서 부하토크 응답특성이 향상된 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제37권6호
• /
• pp.805-814
• /
• 2013

유압식 Dipod 플랫폼은 기동차량에서 위성을 지향하는 안테나의 안정화 및 추적에 사용된다. 이러한 플랜트의 제어기 설계에는 외란제거와 추적 두 가지 성능목표 뿐만 아니라 강인성을 함께 절충해야 하는 제약조건으로 인해 1자유도 제어기에 비해 설계 유연성이 큰 2자유도 $H_{\infty}$ 제어기가 선호된다. $H_{\infty}$ 기반한 2자유도 제어기 종합방법에는 두 가지 프레임웍이 사용되는데 유압식 Dipod 플랫폼의 예를 통해서 일괄종합 방법이 더 우수한 성능을 보인 반면 분리종합 방법은 더 우수한 강인성을 보임을 확인할 수 있었다. $H_{\infty}$ 2자유도 종합방법에 따른 이러한 두 결과의 차이를 시스템 정합행렬의 구조화 특성을 통해 비교하여 보았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.95-97
• /
• 2018

The power quality of Single Phase Grid-Connected Inverters (GCIs) has received much attention with the increasing number of Distributed Generation (DG) systems. However, the performance of single phase GCIs get degraded due to several factors such as the grid voltage harmonics, the dead time effect, and the turn ON/OFF of the switches, which causes the harmonics at the output of GCIs. Therefore, it is not easy to satisfy the harmonic standards such as IEEE 519 and P1547 without the help of harmonic compensator. To meet the harmonic standards a certain kind of harmonic controller needs to be added to the current control loop to effectively mitigate the low order harmonics. In this paper, the harmonic compensation is performed using a novel robust harmonic compensation method based on Digital Lock-in Amplifier (DLA). In the proposed technique, DLAs are used to extract the amplitude and phase information of the harmonics from the output current and compensate it by using a simple PI controller in the feedforward manner. In order to show the superior performance of the proposed harmonic compensation technique, it is compared with those of conventional harmonic compensation methods in terms of the effectiveness of harmonic elimination, complexity, and implementation. The validity of the proposed harmonic compensation techniques for the single phase GCIs is verified through the experimental results with a 5kW single phase GCI. Index Terms -Single Phase Grid Connected Inverter (SPGCI), Harmonic Compensation Method, Total Harmonic Distortion (THD) and Harmonic Standard.