• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.30-35
• /
• 1999

Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline it is getting more popular for reducing emissions from the vehicle This paper when an LPG engine works in the range of idle analyzed the operating range preciously an provides reducing method of emissions for the LPG engine. An electronic control unit(ECU) for the LPG engine using a feedback mixer is presented. The ECU is built by using a microcontroller MC68HC05. A PI-controller is imple-mented in the ECU in order to handle to handle Air/Fuel ration control. The experimental results exhibit that the required engine performance are satisfied at idle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.330.2-330.2
• /
• 2014

III-V족 화합물반도체는 트랜지스터와 광다이오드, 레이저 등의 광전소자 제작물질로 오랫동안 사용 되어 왔다. III-V 화합물 반도체로 제작된 광전소자의 특성을 향상시키기 위해선 다양한 형태의 표면구조가 필요하며, distributed feedback 레이저나 distributed Bragg reflector 레이저의 경우 높은 aspect-ratio를 가지는 구조를 필요로 한다. 현재까지 높은 aspect-ratio를 가지는 III-V족 화합물반도체 구조제작을 위해 reactive ion etching (RIE) 방식을 사용 하였는데, 이 방법은 ion collision에 의한 표면손상과 더불어 에칭 잔여물이 남아 반도체 표면을 오염시키는 문제점을 가지고 있다. 이를 개선하기 위하여 MaCE (Metal-Assited chemical etching)법이 최근 제안되었는데, 본 연구에서는 MaCE 방법을 통하여 다양한 형태의 GaAs 표면구조를 제작하였다. 본 실험을 통하여 에칭용액 조건에 따라 GaAs의 구조적 특성과 morphology가 달라지는 것을 확인하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.358-365
• /
• 2005

In induction machine drive without a speed sensor, the estimation of the motor flux and speed often becomes deteriorated at low speeds with low back EMF. Our analysis shows that, in addition to the state resistance variation, the estimated value of field orientation angle is often corrupted by accumulative errors from the integration of voltage variables at motor terminals that have low signal/noise ratio at low frequencies. A repetitive loop path of integration in the feedback can amplify this type of error, thus speeding up the degradation process. The control system runs into information starvation due to the loss of correct field orientation. The machine's spiral vectors are controlled only in a reduced dimension in this situation. A novel control scheme is developed to improve the control performance of motor's current, torque and speed at low frequencies. The scheme gains a full-dimensional vector control and is less sensitive to the combined effect of the error sources at the low frequencies. Experimental tests demonstrate promising performances are achievable even below 0.5 Hz.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.621-626
• /
• 1997

Combustion instability is a common phenomenon in a ducted flame burner and is known as accompanying low frequency oscillation. This is due to the interaction between unsteady heat release rate and sound pressure field, that is, thermoacoustic feedback. In Rayleigh criterion, combustion instability is triggered when the heat additions is in phase with acoustic oscillation. A Rijke type burner with a pre-mixed flame is built for investigating the effect of Reynolds number and equivalence ratio on thermoacoustic oscillation. In addition, the effect of wall temperature is presented. The results suggest that the frequency of max. oscillation is dependent on Reynolds number and equivalence ratio whereas its magnitude is not a strong function of these two parameters. On the other hand, the wall temperature distribution has much strong effects on the oscillation, even creates different mode of acoustic resonance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.45-53
• /
• 2003

The significances of this paper are of two points. One is that this research develops the query expansion search by adding the related terms based on the dictionary to the original query terms. This method shortens the process of the conventional model of query expansion utilizing the feedback data of the search. The other is that this research tries to find out the optimal point of precisions and recalls by differentiating the weight ratio between original quay and additional terms. This method shows that the efficiency and precision of query expansion search increase.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1160-1171
• /
• 2015

The purpose of this study is to design and develop a computer based learning and test system, which supports not only testing learner's ability but also learning contents with giving feedback and hint. In order to design and develop a computer based learning and test system, Visual Basic dot Net software is used. The system works in three stages: sequential problem solving stage, randomized problem solving stage, and the challenge stage of pass/fail. The results of this study are as follows: (a) We propose the context of design for the computer based learning and test system. (b) We design and develop items display function with sequential and random algorithm in this system. (c) We design and develop pass/fail function by applying SPRT(Sequential Probability Ratio Testing) algorithm in the computer based learning and test system.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.712-721
• /
• 2014

This paper introduces a simple grid-voltage-sensorless control scheme for single-phase power factor correction (PFC) boost converters. The grid voltage waveform is obtained based on the dc output voltage, the switching duty ratio, and a phase-lead compensator. In addition, the duty ratio feedback is utilized to obtain the unity input power factor and the zero harmonic current. The proposed control scheme is designed and mathematically analyzed based on a small-signal model of PFC boost converters. To verify the effectiveness of the proposed control scheme, several simulations and experiments are carried out in two applications: an industrial power system with a 60 Hz grid frequency and a commercial aircraft application with a 400 Hz grid frequency.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.13-18
• /
• 2009

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought about by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 2.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}106$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental data in the low aspect ratio cavity (L/D = ~ 4.5). In the large aspect ratio cavity, however, there are other low dominant frequencies due to the leading edge shear layer with the dominant frequencies of the feedback mechanism. The characteristics of the acoustic wave propagation are analyzed using the Correlation of Pressure Distribution (CPD).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1299-1305
• /
• 2017

In this paper, we consider a beamforming game between the transmitters in a two-user multiple-input single-output interference channel using limited feedback and investigate how each transmitter is able to find a modified strategy from the quantized channel state information (CSI). In the beamforming game, each of the transmitters (i.e., a player) tries to maximize the achievable rate (i.e., a payoff function) via a proper beamforming strategy. In our case, each transmitter's beamforming strategy is represented by a linear combining factor between the maximum ratio transmission (MRT) and the zero forcing (ZF) beamforming vectors, which is the Pareto optimal achieving strategy. With the quantized CSI, the transmitters' strategies may not be valid because of the quantization errors. We propose a modified solution, which takes into account the effects of the quantization errors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.91-98
• /
• 2013

Magnetic sensor chip for measuring bio-magnetism is implemented in $0.18{\mu}m$ CMOS technology. The magnetic sensor chip consists of a small-sized high inductance coil sensor and an instrumentation amplifier (IA). High inductance coil sensor with suitable sensitivity and bandwidth for measurement of bio-magnetic signal is designed using electromagnetic field simulation. Low gm operational transconductance amplifier (OTA) using transconductance reduction techniques is designed for on-chip solution. Output signal sensitivity of magnetic sensor chip is $3.25fT/{\mu}V$ and reference noise of 21.1fT/${\surd}$Hz. Proposed IA is designed along with band pass filters(BPF) to reduce magnetic signal noise by using current feedback techniques. Proposed IA achieves a common mode rejection ratio of 117.5dB while the input noise referred is kept below $0.87{\mu}V$.