• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.68-72
• /
• 2012

Al2017 is typical Duralumin of self-hardening aluminum alloy. It is lightweight, formability and machinability so throughout the industries have widely used automobile, electronics, semiconductor and aircraft as material. A variety of CNC machine tool processing technology, scientific principles and experience have been studied in order to increase accuracy and productivity. Using a machining center is to constant amount of side step and cutting characteristics studied changing depth of cut, revolution per minute and feed rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.993-997
• /
• 1997

The continuous chip depresses the accuracy of workpieces and promotes the wear of machine tools and hunts operators. So chip control os a major problem in turning process. In this paper, a method of chip identification is develope by pyrometer. The identifier is applied in real-time control of chip pattern with adjusting feedrate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.109-114
• /
• 1992

This paper describes an effect of operating condition on surface roughness in wire-cut FDM. The experimental values of surface roughness were measured by the test pieces under the condition of changing. On time, Off time, and Feed rate after fixing other conditions. The material of the test pieces is the alloy tool steel(STD 11) and was used after heat treatment. The results are as follows: 1. The surface roughness became rapidly worse according to the increase of On time and Feed rate. 2. The surface roughness became slowly better according to the increase of Off time.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.7-14
• /
• 1981

The experiment using Anake broiler strain chicks was conducted to study the effort fungistatic agents on microbial counts, Ins of nutrient, growth rate and feed efficiency of the broiler. Feed was adjusted to 12% and 15% moisture level during hot and high humidity season and sorbic acid at the level of 0.02%, 0.04% and Ca-propionic acid at the level 0.1% 0.2% was added. The results obtained were as follows. 1, The Addition of fungistatic agents could slightly reduce mold and yeast counts. The highest effect on inhibition of mold and yeast counts was observed for the addition of sorbic acid at 0.04% level to the fled contained 15% moisture. 2, Approximately 14% starch loss of ground corn was observed from the fred contained 15% moisture and the loss could be diminished to 3-7% by the addition of fungistatic agents with the superior effect of sorbic acid to Ca-propionic acid. 3. Approximately 15% fat loss was detected when high moisture fled was und and this was reduced to 7% by the addition of 0.04% sorbic acid to the feed. 4. Significantly higher growth rate (p＜0.05) during starter period was observed for low moisture feed added by sorbic acid compared with that for high moisture diet without fungistatic agents or with Ca-propionate at the level of 0.1%. 5. Significantly lower feed efficiency (p＜0.05) during starter period of high moisture feed without fungistatic agents was observed; hower no significant different response was detected by either moisturer level of kinds and levels of fungistatic agents used. 6. Significantly higher growth rate (p＜0.05) during finisher period of lower moisture feed with 0.04% sorbic acid was observed compared with that of high moisture fled without fungistatic agents or the feed added by 0.1% Ca-propionate level. 7. Significantly higher feed efficiency (p＜0.05) during finisher period of low moisture feed added by sorbic acid 0.02% or 0.04% level was found compared with that of high moisture feed without fungistatic agents and low moisture feed added by Ca-propionate at the level of 0.1% or 0.2%. 8. Mort bacteria, mold and yeast were observed in the ceca than in small intestine. The. moisture content of dict had no effect on intestinal microfloral counts. However, numbers of mold and yeast of intestine could slightly be reduced by fungistatic agents administration. 9. Nothing but encephalomalacia to chicks fed feed contained 15% moisture without addition of fungistatic agents was observed. In conclusion, addition of either sorbid acid at 0.04% level and Ca-propionate at 0.2% level to high moisture feed or reduced moisture level to 12% could be con-sidered more effective to enhance growth rate and fled efficiency of broilers during summer period.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.257-264
• /
• 1999

The objective of this study was to estimate the possibility of use as a crude feed about Korean pine foliage. Foliage was fermented aerobic and anaerobic state. And then, it was fed Korean native bull 5 to 6 month old. Bulls were fed control (n=4), aerobic fermented (n=4) and anaerobic fermented (n=4) feed 30 percent of total ration. Bulls were examined with blood sample and body weight on day 0, 60, 120 and 180. There were no differences on complete blood cell count serum chemistry and incidence of disease among groups for experiment period. Also, electrolytes (Ca, Mg, P) balance were good condition. Experimental feed did not induced toxicosis in kidney and liver, Fermented foliage and leaves of Korean softwood were efficient crude feed in carbohydrate, fat and protein metabolism. Experimental feed induced growth of Korean native bull body weight in growing stage without retard. In addition to anaerobic fermented feed has a more higher growth rate than control feed. Our conclusion is that fermented softwood substitute some part of ration, minimum 30 percent, in growing stage of a Korean native bull.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.303-316
• /
• 1994

Microbial digestion of feed in the rumen involves a sequential attack culminating in the formation of fermentation products and microbial cells that can be utilized by the host animal. Most feeds are protected by a cuticular layer which is in effect a microbial barrier that must be penetrated or circumvented for digestion to proceed. Microorganisms gain access to digestible inner plant tissues through damage to the cuticle, or via natural cell openings (e.g., stomata) and commence digestion from within the feed particles. Primary colonizing bacteria adhere to specific substrates, divide to form sister cells and the resultant microcolonies release soluble substrates which attract additional microorganisms to the digestion site. These newly attracted microorganisms associate with primary colonizers to form complex multi-species consortia. Within the consortia, microorganisms combine their metabolic activities to produce the diversity of enzymes required to digest complex substrates (e.g., cellulose, starch, protein) which comprise plant tissues. Feed characteristics that inhibit the microbial processes of penetration, colonization and consortia formation can have a profound effect on the rate and extent of feed digestion in the rumen. Strategies such as feed processing or plant breeding which are aimed at manipulating feed digestion must be based on an understanding of these basic microbial processes and their concerted roles in feed digestion in the rumen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.3
• /
• pp.440-452
• /
• 2007

The low feed intake immediately after weaning is responsible for villous atrophy and reduced growth rate in newly-weaned pigs. Overcoming this drawback will produce beneficial results for swine producers, and this warrants an understanding of the factors affecting the feed intake in newly-weaned pigs. In fact, a plethora of factors exert influences on feed intake in newly-weaned pigs, and these factors encompass health status, creep feeding, weaning age, mixing of litters, environment, dietary nutrient level and balance, palatability of ingredients, forms of diet presentation, water supply and quality, and stockmanship. Due to the complexity of the factors that affect the feed intake of weaned pigs, a comprehensive approach should be adopted to overcome the low feed intake problem right after weaning. It warrants mention that it is almost impossible to completely restore the feed intake just after weaning to pre-weaning level in terms of energy intake through dietary means which are available for being practiced economically and/or technically in current swine production. However, a refined dietary regime will certainly alleviate the low feed intake problem in the immediate postweaning period.

• Fisheries and Aquatic Sciences
• /
• v.24 no.9
• /
• pp.311-317
• /
• 2021

Inclusion effect of various levels of jack mackerel meal (JMM) acting as feed attractants and/or stimulants in diets on the growth, feed consumption, feed utilization and whole body composition of rockfish was investigated. Three hundred juvenile rockfish were randomly allocated into 15 flow-through tanks. Five experimental diets supplemented with JMM at 0%, 1%, 3%, 5%, and 10% at the expense of anchovy meal were prepared and referred to as the JMM0, JMM1, JMM3, JMM5, and JMM10 diets, respectively. Weight gain, specific growth rate (SGR) and feed consumption of fish tended to improve with dietary levels of JMM. The greatest weight gain, SGR and feed consumption were observed in fish fed the JMM10 diet, followed by the JMM5, JMM3, JMM1, and JMM0 diets, in that order. Condition factor (CF) of fish tended to improve with dietary inclusion levels of JMM. Growth performance, feed consumption and CF of fish tended to improve with dietary inclusion levels of JMM ranging from 0% to 10%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.26-36
• /
• 2012

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of mounting a quill system to lubricate cylinder parts for a smooth operation. In order to apply the common-rail lubricating system to the developed cylinder lubricator as the second research stage, the mechanical quill system with a progressively quantitative distributor (M.D.S.) is improved in the electronically controlled quill system with an accumulating distributor (E.D.S.). In this study, the effects of lubricator motor speed, plunger stroke and cylinder back pressure on oil feed rate and inequality rate are experimentally investigated by applying E.D.S. to the developed cylinder lubricator. It is found that the oil feed rate of E.D.S. is higher than that of M.D.S. because of the increase of delivery speed and volume by changing the role of accumulator in the same experimental condition. It can be also shown that, in E.D.S., the inequality rate is decreased a little or hardly unchanged as the cylinder back pressure and plunger stroke is elevated, while the inequality rate increased in M.D.S.. The inequality rates of E.D.S. and M.D.S. are lowered as the lubricator motor speed is increased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.4
• /
• pp.530-536
• /
• 2014

In a $2{\times}2$ factorial experiment the hypotheses tested were that the metabolic acid load caused by benzoic acid (BA) added to the feed affects bone mineralization of weanling pigs, and that a wide dietary calcium (Ca) to phosphorus (P) ratio in phytase-supplemented feeds with a marginal P concentration has a positive effect on bone mineralization. The four experimental diets, which contained 0.4% P and were supplemented with 1,000 FTU phytase/kg, contained either 5 g BA/kg or no BA and either 0.77% Ca or 0.57% Ca. The 68 four-week-old Large White pigs were fed the experimental diets ad libitum for six weeks and were then slaughtered. Benzoic acid increased feed intake (p = 0.009) and growth rate (p = 0.051), but did not influence the feed conversion ratio (p>0.10). Benzoic acid decreased the pH of the urine (p = 0.031), but did not affect breaking strength and mineralization of the tibia (p>0.10). The wide Ca:P ratio decreased feed intake (p = 0.034) and growth rate (p = 0.007) and impaired feed the conversion ratio (p = 0.027), but increased the mineral concentration in the fat-free DM of the tibia (p = 0.013) without influencing its breaking strength (p>0.10). The observed positive effect of the wide Ca:P ratio on bone mineralization may be attributed, at least in part, to the impaired feed conversion ratio, i.e. to the higher feed intake and consequently to the higher mineral intake per kg BW gain. The negative impact on animal performance of the wide dietary Ca:P ratio outweighs its potentially positive effect on bone mineralization, precluding its implementation under practical feeding conditions.