• 제목/요약/키워드: feed processing technologies

검색결과 10건 처리시간 0.03초

Expanding 사료 가공 기술이 산란계의 계란 품질 및 영양소 소화율에 미치는 효과 (Effects of Expanding Feed Processing Technologies on Egg Characteristic and Nutrient Digestibility in Laying Hens)

  • 유종상;채수진;박송이;장해동;석호봉;김인호;김용철
    • 한국가금학회지
    • /
    • 제33권2호
    • /
    • pp.127-131
    • /
    • 2006
  • 본 시험은 expanding 가공 기술이 산란계의 생산성, 계란 품질과 영양소 소화율에 대하여 알아보고자 실시하였다. 49주령 Hy-line Brown 270수를 공시하였고, 6주간 시험을 실시하였다. 1) MS(mash), 2) EC(expanded crumble) 및 3) EP( expanded pellet) 으로 3처리구로 구성하였으며, 처리 당 15반복, 반복당 6수씩 완전임의 배치하였다. 산란율은 EC와 EP 처리구가 MS 처리구와 비교하여 유의적으로 높게 나타났다(p<0.05). 그러나 난중은 처리구간에 유의적인 차이는 없었다(p>0.05). 난각 강도는 EC와 EP 처리구가 MS 처리구와 비교하여 유의적으로 높게 나타내었지만(p<0.05), 난각 두께는 처리 구간에 유의적인 차이를 나타내지 않았다(p>0.05). 난황색은 EC 처리구가 MS 처리구와 비교하여 유의적으로 높게 나타났다(p<0.05). 난황 계수는 EC와 EP 처리구가 MS 처리구와 비교하여 유의적으로 높게 나타났다(p<0.05). Haugh uint에 있어서 처리구간의 유의적인 차이는 없었으나(p>0.05), 변화량에 있어서 EP 처리구가 가장 높게 나타났다(p<0.05). 영양소 소화율에 있어서 건물, 칼슘, 인 소화율에 있어서 EP 처리구가 소화율을 개선시켰다(p<0.05). 본 연구 결과는 2차적인 사료 가공 기술이 산란계에 서 계란 품질과 영양소 소화율을 개선하였다.

인쇄 롤의 간접식 레이저 가공을 위한 코팅과 에칭 기술 (Coating and Etching Technologies for Indirect Laser processing of Printing Roll)

  • 이승우;김정오;강희신
    • 한국레이저가공학회지
    • /
    • 제16권4호
    • /
    • pp.12-16
    • /
    • 2013
  • For mass production of electronic devices, the processing of the printing roll is one of the most important key technologies for printed electronics technology. A roll of printing process, the gravure printing that is used to print the electronic device is most often used. The indirect laser processing has been used in order to produce printing roll for gravure printing. It consists of the following processing that is coating of photo polymer or black lacquer on the surface of printing roll, pattering using a laser beam and etching process. In this study, we have carried out study on the coating and etching for $25{\mu}m$ line width on the printing roll. To do this goals, a $4{\mu}m$ coating thickness and 20% average coating thickness of the coating homogeneity of variance is performed. The factors to determine the thickness and homogeneity are a viscosity of coating solution, the liquid injection, the number of injection, feed rate, rotational speed, and the like. After the laser patterning, a line width of $25{\mu}m$ or less was confirmed to be processed through etching and the chromium plating process.

  • PDF

ELECTROCHEMICAL PROCESSING OF USED NUCLEAR FUEL

  • Goff, K.M.;Wass, J.C.;Marsden, K.C.;Teske, G.M.
    • Nuclear Engineering and Technology
    • /
    • 제43권4호
    • /
    • pp.335-342
    • /
    • 2011
  • As part of the Department of Energy's Fuel Cycle Research and Development Program an electrochemical technology employing molten salts is being developed for recycle of metallic fast reactor fuel and treatment of light water reactor oxide fuel to produce a feed for fast reactors. This technology has been deployed for treatment of used fuel from the Experimental Breeder Reactor II (EBR-II) in the Fuel Conditioning Facility, located at the Materials and Fuel Complex of Idaho National Laboratory. This process is based on dry (non-aqueous) technologies that have been developed and demonstrated since the 1960s. These technologies offer potential advantages compared to traditional aqueous separations including: compactness, resistance to radiation effects, criticality control benefits, compatibility with advanced fuel types, and ability to produce low purity products. This paper will summarize the status of electrochemical development and demonstration activities with used nuclear fuel, including preparation of associated high-level waste forms.

Effect of temperature and blank holder force on non-isothermal stamp forming of a self-reinforced composite

  • Kalyanasundaram, Shankar;Venkatesan, Sudharshan
    • Advances in aircraft and spacecraft science
    • /
    • 제3권1호
    • /
    • pp.29-43
    • /
    • 2016
  • Composite materials are rapidly gaining popularity as an alternative to metals for structural and load bearing applications in the aerospace, automotive, alternate energy and consumer industries. With the advent of thermoplastic composites and advances in recycling technologies, fully recyclable composites are gaining ground over traditional thermoset composites. Stamp forming as an alternative processing technique for sheet products has proven to be effective in allowing the fast manufacturing rates required for mass production of components. This study investigates the feasibility of using the stamp forming technique for the processing of thermoplastic, recyclable composite materials. The material system used in this study is a self-reinforced polypropylene composite material (Curv$^{(R)}$). The investigation includes a detailed experimental study based on strain measurements using a non-contact optical measurement system in conjunction with stamping equipment to record and measure the formability of the thermoplastic composites in real time. A Design of Experiments (DOE) methodology was adopted to elucidate the effect of process parameters that included blank holder force, pre heat temperature and feed rate on stamp forming. DOE analyses indicate that feed rate had negligible influence on the strain evolution during stamp forming and blank holder force and preheat temperature had significant effect on strain evolution during forming.

디버링용 지능 로보트 시스템에 관한 연구 (Intelligent system for robotic deburring)

  • 박경택;최재찬;한장남;이정규;김무용;정병균
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.256-263
    • /
    • 1993
  • The integration of deburring robots into product quality and productivity impact the industrial. In this paper the intelligent system of robotic deburring is proposed integrated with robot system, image processing system, force sensor system and host PC. The size, position, recognition of burr is determined by the information that the image processing system processed. The feed velocity of cutting tool is controlled by the information that the force sensor system processed. The integration of these information can remove the uncertainty of the information of deburring on the cutting path. The result of these technologies is useful for the development of the factory automation and automatic inspection equipments.

  • PDF

AlSi12 분말의 직접 레이저 용융 적층 시 공정 조건에 따른 적층 특성에 관한 연구 (Study on Effects of Direct Laser Melting Process Parameters on Deposition Characteristics of AlSi12 powders)

  • 서자예;윤희석;이기용;심도식
    • 소성∙가공
    • /
    • 제27권5호
    • /
    • pp.314-322
    • /
    • 2018
  • AlSi12 is a heat-resistant aluminum alloy that is lightweight, corrosion-resistant, machinable and attracting attention as a functional material in aerospace and automotive industries. For that reason, AlSi12 powder has been used for high performance parts through 3D printing technology. The purpose of this study is to observe deposition characteristics of AlSi12 powder in a direct energy deposition (DED) process (one of the metal 3D printing technologies). In this study, deposition characteristics were investigated according to various process parameters such as laser power, powder feed rate, scan speed, and slicing layer thickness. In the single track deposition experiment, an irregular bead shape and balling or humping of molten metal were formed below a laser power of 1,000 W, and the good-shaped bead was obtained at 1.0 g/min powder feed rate. Similar results were observed in multi-layer deposition. Observation of deposited height after multi-layer deposition revealed that over-deposition occurred at all conditions. To prevent over-deposition, slicing layer thickness was experimentally determined at given conditions. From these results, this study presented practical conditions for good surface quality and accurate geometry of deposits.

Bronze를 이용한 쾌속조형제조에 대한 연구 (A Study on the Manufacturing Rapid Prototype Using Bronze)

  • 전병철;김재도
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 추계학술대회 논문집
    • /
    • pp.204-209
    • /
    • 1995
  • The implementation of rapid prototyping technologies has been developed for automotive engineering by utilizing concurrent engineering principes integrated with slective laser sintering. The Selective Laser Sintering, in which a part is generated in layers form powder using a computer-controlled laser scanning apparatus and power feed system. An over view of the basic principles of SLS Machine operation is given. Binding mechanisms are described for power which becomes thermally activated bye the scanning laser beam; viscous flow and melting of a low-melting-point phase in powder. The production of parts from metal is described, including post processing to improve structural integrity and induce a transformation.

  • PDF

OpenCV를 활용한 이미지 유사성 비교 시스템 (The Similarity of the Image Comparison System utilizing OpenCV)

  • 반태학;방진숙;육정수
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 춘계학술대회
    • /
    • pp.834-835
    • /
    • 2016
  • 최근 들어 IT기술의 발전은 급속도로 성장하고 있다. 이에 따라 실시간 이미지 프로세싱 및 여러 플랫폼의 호환성을 제공하는 OpenCV를 활용한 이미지 처리 기술들에 대한 연구도 활발히 진행 중에 있다. 현재, 서로 다른 이미지를 비교, 유사성을 판별하는 시스템은 일치율이 낮거나, 사람이 아날로그적인 수치를 이용하여 판별하는 시스템이 대부분이다. 본 논문에서는 OpenCV의 Template Matching과 Feature Matching을 활용하여 서로 다른 이미지 간 유사성을 디지털 값으로 판별하는 시스템에 대해 연구한다. 이미지 스크린 중 비교점을 특정하여 피처를 추출, 서로 상이한 크기에서도 동일한 피처로 인식하여 비교대상 이미지의 피처셋과 비교하여 유서성을 비교, 검증하게 된다. 이는 음성 및 영상 인식 및 분석, 처리기술에서 보다 정확인 일치율 판독이 가능하다. 향후 법의학 및 OpenCV외의 이미지 처리기술에 대한 연구가 필요할 것으로 사료된다.

  • PDF

Current situation and future trends for beef production in the United States of America - A review

  • Drouillard, James S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제31권7호
    • /
    • pp.1007-1016
    • /
    • 2018
  • USA beef production is characterized by a diversity of climates, environmental conditions, animal phenotypes, management systems, and a multiplicity of nutritional inputs. The USA beef herd consists of more than 80 breeds of cattle and crosses thereof, and the industry is divided into distinct, but ofttimes overlapping sectors, including seedstock production, cow-calf production, stocker/backgrounding, and feedlot. Exception for male dairy calves, production is predominantly pastoral-based, with young stock spending relatively brief portions of their life in feedlots. The beef industry is very technology driven, utilizing reproductive management strategies, genetic improvement technologies, exogenous growth promoting compounds, vaccines, antibiotics, and feed processing strategies, focusing on improvements in efficiency and cost of production. Young steers and heifers are grain-based diets fed for an average of 5 months, mostly in feedlots of 1,000 head capacity or more, and typically are slaughtered at 15 to 28 months of age to produce tender, well-marbled beef. Per capita beef consumption is nearly 26 kg annually, over half of which is consumed in the form of ground products. Beef exports, which are increasingly important, consist primarily of high value cuts and variety meats, depending on destination. In recent years, adverse climatic conditions (i.e., draught), a shrinking agricultural workforce, emergence of food-borne pathogens, concerns over development of antimicrobial resistance, animal welfare/well-being, environmental impact, consumer perceptions of healthfulness of beef, consumer perceptions of food animal production practices, and alternative uses of traditional feed grains have become increasingly important with respect to their impact on both beef production and demand for beef products. Similarly, changing consumer demographics and globalization of beef markets have dictated changes in the types of products demanded by consumers of USA beef, both domestically and abroad. The industry is highly adaptive, however, and responds quickly to evolving economic signals.

다중비중선별기를 이용한 광물찌꺼기로부터 비소제거 연구 (Study on As Removal from Mine Tailing using MGS Gravity Separator)

  • 김준희;김민규;김우람;한오형
    • 자원리싸이클링
    • /
    • 제23권5호
    • /
    • pp.36-43
    • /
    • 2014
  • 광물찌꺼기에는 다양한 종류의 중금속이 함유되어 있어, 국내외에서 광물찌꺼기로부터 중금속을 제거하기 위해 많은 연구가 이루어졌으나, 중금속을 제거하기에는 여러 가지 문제점과 제약이 따르기 때문에 한계가 있었다. 따라서 이를 해결하고자 본 연구에서는 미립자의 선별까지도 가능한 다중비중선별기(Multi-gravity separator, MGS)를 사용하여 광물찌꺼기에 함유된 비소를 제거하기 위한 비중선별실험을 수행하였다. MGS를 이용하여 비중선별에 의해 비중이 높은 비소를 함유한 광물을 제거하고자 경사각, 세척수량, 광액농도, 드럼의 회전속도, 급광량에 따른 영향을 확인하였다. 실험결과 최적실험 조건인 MGS의 경사각 $3^{\circ}$, 세척수량 5 l/min., 광액농도 30%, 드럼 회전속도 208 rpm, 그리고 급광량 265.24 g/min. 에서 As 제거율과 산출율이 각각 88.21%와 92.25%인 결과를 얻었다.