• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.640-647
• /
• 2023

Material corrosion in nuclear power plant (NPP) is not controlled only by amine injection but also by ion exchange (IX) which is the best option to remove trace Na⁺. This study was conducted to understand the Na⁺ leakage characteristics of IX beds packed with ethanolamine-form (ETAH-form) and hydrogen-form (H-form) resins in the simulated water-steam cycle in terms of intrinsic behaviors of four kinds of cation-exchange resins through ASTM test and Vanselow mass action modeling. Na⁺ was inappreciably escaped throughout the channel created in resin layer. Na⁺ leakage from IX bed was non-linearly raised because of its decreasing selectivity with increasing Na⁺ capture and with increasing the fraction of ETAH-form resin. Na⁺ did not reach the breakthrough earlier than ETAH⁺ and NH₄⁺ due to the increased selectivity of Na⁺ to the cation-exchange resin (H⁺ < ETAH⁺ < NH₄⁺ ≪ Na⁺) at the feed composition. Na⁺ leakage from the resin bed filled with small particles was decreased due to the enhanced dynamic IX processes, regardless of its low selectivity. Thus, the particle size is a predominant factor among intrinsic properties of IX resin to reduce Na⁺ leakage from the condensate polishing plant (CPP) in NPPs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.12
• /
• pp.1721-1725
• /
• 2012

A growth and digestibility study was conducted using Osmanabadi goat male kids by feeding complete diets in the form of mash or expander extruded pellets containing different levels of red gram (Cajanus cajan) straw (RGS). Two iso-nitrogenous complete diets were prepared by incorporating RGS at 35% and 50% levels. Half the quantity of each complete mash feed was then converted into pellets through expander extruder processing. Thirty two kids of 4 to 5 months age were divided into four groups of eight each and were fed for 150 d with four experimental diets (T1: mash with 35% RGS, T2: mash with 50% RGS, T3: pellets with 35% RGS and T4: pellets with 50% RGS). Pelleting of complete diets significantly (p<0.001) increased the voluntary feed intake (671.45 vs 426.28 g/d) at both levels of RGS in the feeds. Average daily gain (ADG, g/d) also increased significantly (p<0.001) from 48.79 in kids fed mash diet to 71.29 in those fed with pelleted diets. Feed conversion efficiency (dry matter (DM) intake: weight gain) was comparable among all the treatment groups. Digestibility of nutrients was not affected by pelleting of the feeds whereas, increasing the level of inclusion of RGS in feeds from 35% to 50% decreased (p<0.05) the digestibility of DM and crude protein (CP) resulting in lower (p<0.001) metabolizable energy (ME) content (MJ/kg DM) in feeds with 50% RGS (7.93 vs 8.75). Daily intake (MJ/kg $BW^{-0.75}$) of ME decreased (p<0.05) in feeds containing 50% RGS while pelleting of feeds increased (p<0.05) the intake of DM, CP, digestible crude protein (DCP) and ME. It is inferred that expander extruder pelleting can efficiently utilize RGS up to 50% level in complete diets for growing goat kids.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.1
• /
• pp.8-14
• /
• 1997

An experiment was carried out to evaluate the effects of feeding graded levels of chromium in the form of chromium picolinate on growth performance, blood components, carcass grade, in vitro lipogenesis and lipolysis, and in vitro protein degradation and synthesis in growing-finishing pigs. There were no significant differences for daily weight gain, feed intake and feed conversion among treatments during growing phase, while in the finishing phase, feed intake was lower in groups fed diets with 200 ppb chromium than in other treatment (p < 0.1). Feed conversion was improved in the groups fed diets with chromium compared with control. Carcass weight was similar among treatments while carcass length was longer in groups fed diets with 200 ppb chromium (p < 0.05). Thinner carcass fat was found with groups fed diets with chromium compared to control. Three A grade of carcasses were from groups fed chromium compared to control. No significant differences were observed with blood glucose, insulin, total cholesterol, triglycerides and non-esterified fatty acid at 60kg body weight. While, at 100 kg body weight, blood triglyceride was lower in groups with 200 and 400 ppb chromium but higher in groups with 100 ppb chromium (p < 0.05). In vitro lipolysis and protein synthesis in adipose tissues were increased as dietary chromium was increased from 0 to 200 ppb (p < 0.1). As a result, 200 ppb chromium in a growing-finishing diet could improve feed efficiency and carcass traits; an increase to 400 ppb has no further effect.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.465-470
• /
• 2007

This paper is designed and producted the microstrip patch antenna which used aperture coupled feed structure, and had a comparatively hish gain and headband characteristic with a PCS substitution repeater antenna. The proposed antenna transformed a coupled slot into a H-type in order to improve a characteristic of a general aperture coupled feed antenna. It is this H-type form slot reduces back lobe from the antenna backside at the same time that a coupling between a power feed and patches is iccreased, and to have maximized a gain of an antenna. As a result of having measured the antenna which the VSWR was 1.5 or below and tied up the gain than 7.5dBi in the $1750{\sim}1870$[MHz] that was a PCS substitution, and a beamwidth became in $80^{\circ}$ and radio waves shadow was local, but accomplishment did PCS mobile communication service in building me smoothly, but confirmed what practical use can become.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.239-248
• /
• 2006

Improvements in understanding the effects of dietary fermentable carbohydrates and their interaction with supplemental feed enzymes and the feed manufacturing process may lead to reductions in volatile organic compound (VOC) emissions from poultry manure. Starch digestibility has been improved by replacing ground wheat or barley with whole wheat or barley, but there was no consistent effect of cereal species or feed form on the pH value of the gizzard contents. Pelleting results in improvements in feed conversion from 0 to 12%. Starch digestibility has been reported to account for up to 35 % of the improvement in available metabolic energy as a result of xylase supplementation. Factors which affect starch utilization and non-starch polysaccharide (NSP) absorption include the presence of anti-nutrient facto. (ANF) in grains, the nature of grain starch, NSP and the digestive capacity of animals. Improvements in feed production technology have been made in enzyme stabilization, allowing some dry enzyme products to be pelleted after conditioning at up to $87.69^{\circ}C$ and liquid enzymes to be stored in the feed mill for up to low months prior to use. The soluble NSP, arabinokylans and beta-glucans are partially degraded into smaller fragments by enzymes. With fragmentation, the water holding capacity is decreased, which leads to a reduction in digesta moisture, wet feces, and dirty eggs from hens fed diets containing viscosity-inducing ingredients.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.437-443
• /
• 2003

A interference of outside electric source and electric fast transient(EFT) are origins of destroy and malfunction in the precise electrical and electronic equipments. It makes a serious obstacle as the form of conducted noise. Therefore, it is strongly needed to protect precision electrical and electronic equipments from the interference and EFT. In this research, a EMC filter composed of feed-through capacitors and ferrite beads of high permeability is designed and it＇s properties are investigated for PDP. The filter produced in this research have wide band frequency characteristics and more than 40 dB reflection loss in the frequence of 10 MHz∼1.5 GHz which satisfy the standard of CISPR Pub. 22 and the level 4 of IEC 61000-4-4.

• Parasites, Hosts and Diseases
• /
• v.51 no.4
• /
• pp.427-432
• /
• 2013

A new trichostome ciliate, Balantidium honghuensis n. sp., was isolated from the recta of Rana nigromaculata and R. limnocharis during parasite surveys in Honghu Lake, Hubei Province, central China in summmer of 2010 and 2011. Its detailed morphometric characters based on LM and SEM studies were described herein. The organism is oval in shape and thickly ciliated. The vestibulum is "V" shaped and occupies about 1/3 to 2/5 of the body length. The vestibular and nearby regions possess strong peripheral fibers which form a marked axial fiber about the cytopharynx. More than 10 contractile vacuoles are distributed along the periphery of the latter body. Comparisions were made between this new species and B. sinensis Nie, 1935. They were discriminated from each other in terms of general body forms, body size, and vestibulum shapes. Besides, special attention was paid to its high-speed daughter swarmers which we believed to be the infective stage of B. honghuensis. Possible infection routes of anura amphibian balantidia were discussed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.2
• /
• pp.37-43
• /
• 2004

High speed machining is a machining process which cuts materials with the fast movement and rotation of a spindle in a machine tool. It reduces machining time because of the high feed and the high speed of a spindle. In addition it gets rid of post processes for high precision machining. When the high speed machining is applied to especially hardened steel, operators should select the proper parameters of machining. This can produce machining surfaces which is qualified with good surface roughness. This paper presents a method for selecting machining parameters to minimize surface roughness with high speed machining in cutting the hardened steels. Experimental data for surface roughness are collected in a machining shop based on the cutting feed and the spindle rotation. The data fits in hi-cubic polynomial surface of mathematical form. From the model this research minimize the surface roughness to find the optimal values of the feed and the spindle speed. This paper presents a program which automatically generates optimal solutions from the raw data of experiments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.605-614
• /
• 2007

Feeding pigs used to be a means of managing domestic resources that may otherwise have been wasted into valuable animal protein. Feeding pigs thus was a form of husbandry. Following recent rapid industrial development, pig rearing has changed from extensive to intensive, but this transformation has been associated with major concerns. The concentration of large amounts of pig manure in small arrears is environmentally hazardous. Moreover, high densities of animals in intensive production systems also impose a health threat for both animals and humans. Furthermore, the use of growth promoters and preventive medicines for higher production efficiencies, such as in-feed antibiotics, also induces microbial resistance thus affects human therapeutics. In addition, consumers are questioning the ethics of treating animals in intensive production systems. Animal welfare, environmental and bio-safe issues are re-shaping the nature of pig production systems. Feeding pigs thus involves not only the consideration of economic traits, but also welfare traits and environmental traits. Thus, a focus on technological feasibility, environmental sustainability and social desirability is essential for successful feeding operations. Feeding pigs now involves multiple projects with different sustainability goals, but goal conflicts exist since no pattern or scenario can fulfill all sustainability goals and the disagreements are complicated by reduced or even no use of in-feed antibiotics. Thus it is difficult to feed pigs in a manner that meets all goals of high quality, safe product, eco- and bio-sustainability, animal welfare and profit. A sustainable pig production system thus requires a prioritization of goals based on understanding among consumers, society and producers and needs to view from both a local and global perspective.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.719-725
• /
• 2004

Mesquite or Vilayati babul (Prosopis juliflora) is a drought resistant, evergreen, spiny tree with drooping branches and a deep laterally spreading root system. It grows in semi-arid and arid tracts of tropical and sub-tropical regions of the world and is spreading because the leaves are unpalatable and animals do not digest its seed. The mesquite has become a major nuisance; cutting or pruning its branches to form a canopy would provide shade for travelers, aid harvesting of pods, as well as make available wood for fuel. An average plant starts fruiting by 3-4 years of age and yields annually 10-50 kg pods/ tree, which can be collected from May-June and September-October. Availability of pods worldwide is estimated to be about 2-4 million metric tonnes. Ripe pods are highly palatable; on dry matter basis they contain 12% crude protein, 15% free sugar, a moderate level of digestible crude protein (7% DCP) with a high level of energy (75% TDN). The pods contain low tannin levels below those toxic to animals. Seeds contain 31-37% protein; pods should be finely ground before feeding to facilitate utilization of the seeds. Mesquite pods could replace costlier feed ingredients such as grain and bran contributing 10-50% of the diet. Phosphorus supplements need to be added when mesquite pod, exceeds 20% of animals' diet.