• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• Journal of Environmental Science International
• /
• v.31 no.3
• /
• pp.291-294
• /
• 2022

This study was conducted to investigate the effect of hydrogen water on duck production in a field study. A total of 600 one-day-old ducks (Pekin) were randomly allotted to two treatment groups with three replicates each having 100 birds per pen in a completely randomized design. The duck production parameters measured included weight gain, feed intake, and feed efficiency. For duck drinking water, general water supplied from the farm was used as the control, and hydrogen water was supplied by installing a device that generates hydrogen (T1 groups). There was no statistical significance in duck weight gain between the two treatment groups (p>0.05). In addition, no significant difference in feed intake was found in both the control and T1 groups (p>0.05), and the range of values was similar. Feed efficiency was not significant different between the treatment groups (p>0.05), and there was no remarkable difference in the range of vaules. These results indicate that hydrogen water did not influence duck production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.495-498
• /
• 1995

Records taken on 372 young beef bulls tested at the Ellerslie Bull Test Station, Alberta, Canada from November 1981 to April 1987 were analyzed to quantify the effects of age of dam, on-test age, on-test liveweight and herd of origin of bull on feed efficiency (feed/gain, kg/kg) in the test period (n = 231) and ultrasonic measurement of bakcfat thickness (mm) at the end of the test (n = 372). The reduction in $R^2$ due to each influencing factor (i.e. the variation accounted for by the factor) was used to indicate the importance of the influencing factor. Age of dam and on-test age of bull were not important factors on feed/gain and ultrasonic backfat thickness, as they accounted for less than 0.5% of the variation in feed/gain and ultrasonic backfat thickness, respectively (p > 0.1). On-test liveweight had some influence on feed/gain and ultrasonic backfat thickness, accounting for 3.5% (p < 0.01) and 0.4% (p < 0.05) of the total variation, respectively. The regression coefficients of feed/gain and ultrasonic backfat thickness on on-test liveweight were 0.016 (kg/kg)/kg and .013 mm/kg, respectively, both being significant (p < 0.05), indicating that lighter bulls entering the test were generally more efficient in feed utilization in the test period and had less backfat at the end of the test than heavier entering bulls. Herd of origin of bull accounted for a substantial amount of the total variation (> 16%) in feed/gain and ultrasonic backfat thickness (p = 0.08), indicating that a prolonged aqjustment period was needed to reduce the influence of herd of origin when assessing aggregate genetic merit of beef bulls for growth rate, feed efficiency and lean meat production using a central station performance testing program.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.377-381
• /
• 2002

The growth rate, feed conversion efficiency and carcass characteristics of nine native Malpura (M) and eight Awassi ${\times}$ Malpura half bred (AM) male lambs were compared under intensive feeding on 60:40 concentrate and roughage based composite feed. Weaning body weight was similar in the two genetic groups while finishing body weight, total body weight gain and average daily gain during the experiment were higher (p<0.01) in AM than M lambs. The feed conversion efficiency was lower in M than AM lambs with 15.7 and 19.8 per cent feed conversion efficiency, respectively, in the two genetic groups. The dressing yield in terms of preslaughter weight or empty live weight was however similar in the two genetic groups. The loin eye area was also greater (p<0.01) in AM than M lambs. The cutability was similar for the two groups amounting to 33.2, 13.3, 13.2, 23.3 and 16.6% of half carcass, respectively, for leg, loin, rack, neck and shoulder and breast and foreshank. On an average the separable lean, fat and KOH bone content of the half carcass were 48.3, 16.8 and 23.3% for native M and 54.1, 15.0 and 19.0% for AM lambs, respectively. It is concluded that growth rate and feed conversion efficiency were better in Awassi ${\times}$ Malpura half bred than native Malpura lambs while dressing yield and cutability of standard cuts were similar in the two genetic groups.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.123-127
• /
• 1999

This paper suggests the establishment of high-accuracy and high-efficiency machining method of scroll shape workpiece by using the feed control method. The cutting paths for machining the inside and outside surfaces of the scroll-shape workpiece are calculated, and the calculation method of the cutting chip areas based on the coordinate of the base circle is shown. A feed control method is proposed for a constant cutting area and cutting force. By machining test of scroll shape workpiece, The machined accuracy of wrap, tool wear, and surface roughness are evaluated. By this method, Reduction of the machining time and large increase of the efficiency can be expected.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.280-286
• /
• 2021

The objective of this study was to prove the effect of pig slurry application with charcoal on nitrogen use efficiency (NUE), feed value and ammonia (NH₃) emission from maize forage. The four treatments were applied: 1) non-pig slurry (only water as a control), 2) only pig slurry application (PS), 3) pig slurry application with large particle charcoal (LC), 4) pig slurry application with small particle charcoal (SC). The pig slurry was applied at a rate of 150 kg N ha^-1, and the charcoal was applied at a rate of 300 kg ha-1 regardless of the size. To determine the feed value of maize, crude protein, dry matter intake, digestible dry matter, total digestible nutrient, and relative feed value were investigated. All feed value was increased by charcoal treatment compared to water and PS treatment. Also, the NUE for plant N was significantly higher in charcoal treatments (LC and SC) compared to PS treatment. On the other hand, there is no significant difference for feed value and NUE between LC and SC. The NH₃ emission was significantly reduced 15.2% and 27.9% by LC and SC, respectively, compared to PS. Especially, SC significantly decreased NH₃ emission by 15% compared to LC. The present study clearly showed that charcoal application exhibited positive potential in nitrogen use efficiency, feed value and reducing N losses through NH₃ emission.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.333-337
• /
• 2001

This study investigated the effects of fermented product from Bacillus subtilis (FPBS) on feed conversion efficiency, fat accumulation and ammonia production in broiler chicks. Sixty female broilers (strain Chunky, 7-day old) were divided into four groups and raised in individual cages. One group was fed a commercial diet without supplementation of FPBS as the control and the other three groups were fed commercial diets containing FPBS, either 0.5, 1.0 or 2.0%, for 21 days from 7 to 28 days of age. Water and feed were given ad libitum. Feed conversion efficiency was significantly improved in chicks supplemented with 0.5 or 1.0% of FPBS as compared with the control (p<0.05). The activities of hepatic acetyl-CoA carboxylase and fatty acid synthetase, and contents of triglyceride and cholesterol in the liver were significantly decreased in treatment groups (p<0.05) as compared with the control group. FPBS had no effect on the concentration of plasma triglyceride, phospholipids and cholesterol. Feeding FPBS at 1 % or 2% levels reduced ammonia gas release (p<0.05). The inclusion of FPBS at 1 % level may be recommended both to improve production efficiency and to reduce air pollution caused by ammonia gas release. For production efficiency to reach maximal profit, the inclusion of FPBS at 0.5% level can be recommended. Feeding FPBS reduced fat accumulation in the liver.

• The Korea Journal of Herbology
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2006

Objectives: To find out the effects GGT1, an antiobestic drug widely used clinics, has on the amount of feed intake, the amount of change in the body weight and the food efficiency ratio using the data from the hGHTg obese male rats. Also, to evaluate in terms of antiobestic effects, the difference between GGT1 and reductil (sibutramine), which has been approved by the FDA of the United States. Methods: We measured the change in body weight and the amount of feed intake for 8 weeks by categorizing the hGHTg obese male rats into three groups: the control group, the GGT1 group, and the reductil (RD) group. We also evaluated the antiobestic effect by calculating the food efficiency ratio, which is the increase of bodyweight divided by the amount of feed intake. Results: In case of body weight, moderate slope of the curve in the graph of GGT1 group could mean that the weight is decreasing as time flows. In case of food efficiency ratio, the p-value was 0.745 in a test for determining if an interaction exists between the group and the point of measurement, meaning that it does not exist; also, the p-value in a test for the effect of level of repetition in food efficiency ratio according to the point of measurement equaled 0.002. Conclusion: The drug-treated groups had a greater inhibitory effect in feed intake than the control group. The results showed the food efficiency ratio had a tendency to decrease. The GGT1 group in particular was under a greater effect than the RD group.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.192-195
• /
• 1998

Biomass conversion efficiencies (B.C.E) of six fish species viz, Catla catla, Labeo, rohita, Cirrhina mrigala, Hypophthalmicthys molitrix, Ctenopharyngodon idella and Cyprinus carpio cultured under artificial feed (T1), broiler manure (T2), buffalo manure (T3), N:P:K (25:25:0) (T4) and control pond (T5) have been determined for the period of one year. The overall biomass conversion efficiencies under the influence of T2, T3, and T4 were statistically similar. However, the best (0.40) efficiency was determined under feed supplement-ation (T1).

• Journal of Environmental Science International
• /
• v.2 no.4
• /
• pp.331-336
• /
• 1993

A mathematical model for organic removal efficiency was investigated in a fluidized bed biofilm reactor by changing the feed flow rate, the residence time and the recycle flow rate. In batch experiment, organic removal could be assumed as first order and an intrinsic first order rate constant(k1) was found $6.4{\times}^{-6}cm^3/mg{\cdot}sec$ at influent COD range of 3040 - 6620 mg/L. In continuous experiment, at the condition of the influent COD, 3040 mg/L, the superficial upflow velocity, 0.47 cm/sec, the biofilm thickness 336 ${\mu}m$ and the biofilm dry density 0.091 g/mL, the calculated COD removal efficiency from the mathematical model gave 60% which was very close to the observed value of 66 %. As the feed flow rate was increased, the COD removal efficiency was sharply decreased and at constant feed flow rate, the COD removal efficiency was decreased also as the residence time being decreased.