• Asian-Australasian Journal of Animal Sciences
• /
• 제14권8호
• /
• pp.1090-1097
• /
• 2001

Nine tons of fresh rice straw from early-maturing varieties was ensiled with 50 g urea $kg^{-1}$ DM straw in plastic bags immediately after threshing. Five months after storage, preserved straw was used to partially replace elephant grass (Pennisetum purpureum, Schumach) for lactating cows. Eight crossbred Holstein lactating cows (75% of Holstein blood) in their second to fourth lactation and in mid-lactation were arranged in a balanced design with two squares consisting of $4\;periods{\times}4\;treatments$ (100% grass ad lib. as a control; 75% grass+urea treated fresh rice straw (UTrFRS) ad lib.; 50% grass+UTrFRS ad lib.; 25% grass+UTrFRS ad libitum) in one square. A concentrate supplement was given at a rate of 400 g per day per kg of milk produced. Samples of fresh straw taken in the field and UTrFRS and elephant grass taken at feeding time were evaluated in a degradation trial with 3 fistulated heifers (undefined blood ratio of crossbred of Sindhi and local yellow cattle). Straw preserved for 5-9 months was in nearly all cases of good quality. Crude protein (CP) content was increased 2.1 fold and 48 h dry matter loss (DML) was 20% higher compared to dry straw. Elephant grass cultivated intensively was low in DM content and 10% higher in 48 h DML compared to UTrFRS. Dry matter intake (DMI) was higher for the mixture of UtrFRS and Elephant grass, and highest when one-third of the roughage was UTrFRS. Higher DMI of mixed roughage diets was probably due to the low DM content of elephant grass in the sole grass roughage diet. Increasing substitution of elephant grass with UTrFRS up to 75% of the roughage component increased milk fat content and had no effect on milk yield and other milk composition parameters. Feeding UTrFRS, partially replacing elephant grass in the diets of lactating cows in the dry season can reduce the cost of roughage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제42권4호
• /
• pp.354-359
• /
• 2009

The productivity of ultra-small rotifer, Synchaeta kitina was investigated at the exchange rate of culture water (10, 20, 30, 40 and 50%) and initial inoculation densities (250, 600 and 900 inds. per mL) in semi-continuous culture. Also, the possibility of mass culture was investigated in a 100 L culture tank. Tetraselmis suecica was used as the feed for S. kitina in all experiments. The production of S. kitina increased with an increase in exchange rate of culture water. The highest production ($82.0{\times}10^5$ inds.) was achieved at 40% exchange rate of culture water. The production of S. kitina increased with an increase of initial inoculation density during the first week and the highest total production ($17.4{\times}10^6$ inds.) was achieved at 900 inds. per mL of initial inoculation density. However, on the second week, all treatments were not significantly different in total production (P>0.05). During the two weeks, total production of S. kitina at 900 inds. per mL of initial inoculation density was higher than at 600 inds. of initial inoculation density, but there was no significant difference (P>0.05). In the 100 L culture tank, density of S. kitina was kept from 516 to 890 inds. per mL and S. kitina was daily harvested $15.5{\times}10^6$ to $26.7{\times}10^6$ during the experimental period. The production cost for 100 million rotifers in semi-continuous culture was 63,656 won. The results from this study indicate that the optimal exchange rate of culture water and initial inoculation density for the semi-continuous culture of ultra-small rotifer, S. kitina are 40% and 600 inds. per mL, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권9호
• /
• pp.1-6
• /
• 2018

Hydro-forming technology has spread dramatically throughout automotive industry over the last 20 years. This technology has many advantages for automotive applications in terms of better structural integrity of the parts, lower cost from fewer parts, material savings, weight reduction, lower springback, improved strength, durability, and design flexibility. In this study, various simulation technologies were developed to investigate the formability of hydro-forming components. Through this technology, to establish the effective forming process for appropriate components design, the bending process, pre-forming process, die closing process, etc. were considered for good forming. This paper proposes the forming amount, section length (corresponding to the hydro-forming press capacity), and minimum curvature (curvature effect evaluation according to the hydro-forming pressure) among the considerations in the design of the hydro-forming part. In addition, a design method is proposed for hydro-forming molding by carrying out cross section analysis of a real sub-frame part for automobiles. The effects of pre-bending, axial feed, hydraulic pressure, press load, and friction among the hydro-forming process parameters were analyzed. Therefore, whether these processes are necessary factors for hydro-forming were examined.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제22권2호
• /
• pp.166-174
• /
• 2014

Fuel injection pressure has steadily increased in diesel engines for the purpose of improving fuel efficiency and cleaning exhaust gas, but it has now reached a point, where the cost for higher pressure does not warrant additional gains. Common rail systems on modern diesel engines have fuel pumps that are mechanically driven by crankshaft. The pumps actually house two pumping module inside: a low pressure pump component and a high pressure pump component. Part of the fuel compressed by the low pressure component returns to the tank in the process of maintaining the pressure in the common rail. Since the returning fuel represents pumping loss, fuel economy improves if the returned fuel can be eliminated by using a properly controled electrical fuel pump. As the first step in developing an electrical fuel pump the fuel supply system on a 6 liter diesel engine was modeled with AMESim to analyze the workload and the fuel feed rate of the injection pump, and the results served as basis for selecting a suitable servo motor and a reducer to drive the pump. A motor controller was built using a DSP and a program which controls the common rail pressure using a proportional control method based on the target fuel pressure information from the engine ECU. A test rig to evaluate performance of the fuel pump is implemented and used to show that the newly developed electrically driven fuel pump can satisfy the fuel flow demand of the engine under various operating conditions when the rotational speed of the pump is adequately controlled.

• Journal of Korean Society on Water Environment
• /
• 제33권3호
• /
• pp.334-340
• /
• 2017

A pilot-scale electrodialysis system was designed and constructed to treat groundwater polluted with arsenic and manganese. Synthetic groundwater, in which some amount of arsenic and manganese was added to make 500 mg/L of Mn and $50{\mu}g/L$ of As, was used as a feed for the ED system. The limiting current density, linear water velocity, applied voltage, and membrane surface area were investigated to obtain efficient and economic operation of the ED system. The linear water velocity was increased 0.74 cm/s to 11 cm/s based on evaluation of limiting current density. The water quality of diluate for 85 minutes of operation was satisfied with water quality criteria for drinking water using the ED system with 14 pairs of ion exchange membranes. The increased membrane pairs to 21 and 42 pairs were very effective to reduce conductivities of the diluate. The operation cost of the ED system was assessed using specific energy consumption, which was $1.065{\sim}1.2kWh/m^3$. Considering low salt concentrations of the groundwater, improvement of the ED system are required to increase current utilization and to apply low voltage while the ED system was applicable to produce drinking water.

• Journal of Korea Society of Industrial Information Systems
• /
• 제23권4호
• /
• pp.81-92
• /
• 2018

Bitcoin is a cryptographic digital currency and has been given a significant amount of attention in literature since it was first introduced by Satoshi Nakamoto in 2009. It has become an outstanding digital currency with a current market capitalization of approximately $60 billion. By 2019, it is expected to have over 5 million users. Nowadays, investing in Bitcoin is popular, and along with the advantages and disadvantages of Bitcoin, learning how to forecast is important for investors in their decision-making so that they are able to anticipate problems and earn a profit. However, most investors are reluctant to invest in bitcoin because it often fluctuates and is unpredictable, which may cost a lot of money. In this paper, we focus on solving the Bitcoin forecasting prediction problem based on deep learning structures and neural decomposition. First, we propose a deep learning-based framework for the bitcoin forecasting problem with deep feed forward neural network. Forecasting is a time-dependent data type; thus, to extract the information from the data requires decomposition as the feature extraction technique. Based on the results of the experiment, the use of neural decomposition and deep neural networks allows for accurate predictions of around 89%.

• Analytical Science and Technology
• /
• 제8권4호
• /
• pp.799-806
• /
• 1995

In industrial field, a large volume of regenerants (acid and caustic soda) and their washing effluents are regularly disposed off from the water demineralization plant during regeneration of the ion-exchanger units. Of these waste effluents, a part of the wash water discharged from the single bed Anion and Mixed Bed units can be utilized at a certain stage of their washing cycles when its conductivity is fallen down and becomes considerably less than that of the input raw water. The main aim of this specific waste effluent utilization is to dilute the TDS concentration of the input raw water (fed into the single bed ion-exchanger units) by blending. The achievement is the increase of the longevity of the production cycles of the I.E. units along with the improvement of the production quality and decrease of the regeneration frequencies. As a result, regenerant consumption would be saved because of the reduction of ionic load in feed water which will ultimately reduce the water purification cost. At the same time, the environment pollution will also be protected to a considerable extent. This operational measure is quite effective and useful specially where high TDS water is demineralized only by single bed ion-exchangers. In such case, the water treatment plant is very often found to suffer from both production quality and quantity in addition to carrying out of random and restless regenerations. Proper reuses of the aforesaid wash water effluents of the Anion and MB units excellently minimizes the difficulties experienced in practice. This paper contains the utilities and techniques of reuses of the different kinds of waste effluents of the industrial water treatment plant in addition to the specific reuses of the post-regeneration wash waters of the Anion and MB ion-exchanger units.

• Environmental and Resource Economics Review
• /
• 제19권4호
• /
• pp.805-828
• /
• 2010

Korea also plans to introduce Renewable Portfolio Standard (RPS) for strengthening market functions after 2012 as United States and several members of EU countries did. Through the introduction of RPS, it requires energy industry to supply new and renewable energy at fixed rate. Therefore, it will contribute to the distribution of new and renewable energy. This paper analyzed the economic effect of the introduction of RPS using CGE. The summary of the paper on the analysis of the economic effect based on endogenous growth theory under imperfect market competition by using CGE is as follows; Since RPS possibly regulates the amount of new and renewable energy, it can achieve the target amount of new and renewable energy without fail. As achieving the target amount accurately, the distribution of more advanced skills can be expected. However, GDP reduction can occur because investment cost increases due to the requirement of new and renewable energy supply. Therefore, in the long run, it is appropriate to introduce RPS because it contributes to the distribution of new and renewable energy and can be utilized as a new growth engine to encourage economic growth.

• Journal of Animal Environmental Science
• /
• 제17권1호
• /
• pp.33-38
• /
• 2011

Economic development involves increase in life expectancy as well as human health care. Consequently, demand for fish meal and fish oil is rapidly growing. In particular, Krill (Eupausia superba) oil product is in high demand due to its rich unsaturated-fatty acid, and thus stable supplies are necessary in the krill oil market. It is required for captured krills to be immediately frozen and stored during ship transport, since proteins of the krill are quickly denatured in natural temperature condition. However, the transportation cost has been sharply increased, which encourages researchers to involve in studies for development of efficient oil extraction process. In this study, a solid/liquid separation technique on boat for the krill oil was developed through triple separation tests using only a separator or using either brush or crusher prior to the separator. The separation tests revealed that the efficiency were 46.2, 60.2 and 60.4 % by the separator, combination with brush, and combination with crusher, respectively. In addition, it was found that byproduct, extracted cake, derived from the separation process could be used as a feed stuff. These results suggest that smashing using the brush or crusher prior to the separator is more efficient than using only the separator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제11권6호
• /
• pp.920-928
• /
• 2000

In this paper, using newly proposed size reduction technique, the aperture coupled microstrip patch antenna for a repeater system in a mobile communication cellular band (824~849 MHz) is developed with a wide bandwidth, small size, light weight, and low cost. The resonant frequency of microstrip antennas is related to the electric field distribution of the radiating patch. The field strength of $TM_{01}$ mode of a rectangular patch antenna is strongest at each of the extremities of the radiating patch, but negligible at center. Therefore, the size of a patch antenna can be effectively minimized by inserting the narrow rectangular dielectric into just under the edges of the resonant Patch. This Paper also proposes the bandwidth improvement technique by using under-coupling technique with a tuning stub. The VSWR is less than 1.5 : 1 for the whole cellular band. The simulation tool was HFSS, Agilent Technologies, Inc.