• Asian-Australasian Journal of Animal Sciences
• /
• 제7권3호
• /
• pp.441-448
• /
• 1994

Postweaning performance data were obtained on 187 group fed purebred Angus calves from 12 selected sires (six high and six low feed conversion sires) in 1985 and 1986. The objective of this portion of the study was to develop prediction equations for feed conversion from a stepwise regression analysis. Variables measured were on-test weight (ONTSTWT), on-test age (ONTSTAG), five weights by 28-d periods, seven linear body measurements: heart girth (HG), hip height (HH), head width (HDW), head length (HDL), muzzle circumference (MC), length between hooks and pins (HOPIN) and length between shoulder and hooks (SHHO), and backfat thickness (BF). Stepwise regressions for maintenance adjusted feed conversion (ADJFC) and unadjusted feed conversion (UNADFC) over the first 140 d of the test, and total feed conversion (FC) until progeny reached 8.89 mm of back fat were obtained separately by conversion groups and sexes and for combined feed conversion groups and sexes. In general, weights were more important than linear body measurements in prediction of feed utilization. To some extent this was expected as weight is related directly to gain which is a component of feed conversion. Weight at 112 d was the most important variable in prediction of feed conversion when data from both feed conversion groups and sexes were combined. Weights at 84 and 140 d were important variables in prediction of UNADFC and FC, respectively, of bulls. ONTSTWT and weight at 140 d had the highest standardized partial regression coefficients for UNADFC and ADJFC, respectively, of heifers. Results indicated that linear measurements, such as MC, HDL and HOPIN, are useful in prediction of feed conversion when feed in takes are unavailable.

• Animal Bioscience
• /
• 제34권4호
• /
• pp.714-723
• /
• 2021

Objective: This study aimed to determine the effects of soft pellet creep feed (SPCF) on growth performance and intestinal development in piglets. Methods: A total of 18 sows and their litters of crossbred piglets (14±2 days, 3.73±0.72 kg) were assigned to one of three dietary groups receiving i) powder creep feed (PCF), ii) hard pellet creep feed (HPCF) or iii) SPCF during the pre-weaning period. After weaning, piglets were selected for continuous evaluation of the three diets on growth performance and intestinal health. Results: In the pre-weaning period, the average daily feed intake and average daily dry matter intake were significantly higher in the SPCF group than the HPCF group (p<0.05). In the post-weaning and entire experimental period, the different diets had no significant effect on growth performance. At 10 d after weaning, the serum glucose concentration was lower in the SPCF group (p<0.05) than the other groups; a higher (p<0.05) villus height and lower (p<0.05) crypt depth in the jejunum were also observed in the SPCF group than the other groups; Meanwhile, in the duodenum and jejunum, the SPCF group had a higher (p<0.05) villus height to crypt depth ratio than the other groups; Furthermore, the higher (p<0.05) threshold cycle values of lactic acid bacteria and lower (p<0.05) threshold cycle values of Clostridium, Enterobacter and Escherichia coli were also observed in the SPCF group, and the sucrase and maltase activity was higher (p<0.05) in the SPCF group than the other groups in duodenum and ileum. Conclusion: The SPCF improved pre-weaning feed intake and decreased the negative effects of weaning stress in the intestine in piglets.

• Journal of Microbiology and Biotechnology
• /
• 제30권2호
• /
• pp.206-215
• /
• 2020

Trichoderma reesei is the major filamentous fungus used to produce cellulase and there is huge interest in promoting its ability to produce higher titers of cellulase. Among the many factors affecting cellulase production in T. reesei, the mycelial phenotype is important but seldom studied. Herein, a close homolog of the Neurospora crassa COT1 kinase was discovered in T. reesei and designated TrCOT1, which is of 83.3% amino acid sequence identity. Functional disruption of Trcot1 in T. reesei by RNAi-mediated gene silencing resulted in retarded sporulation on potato dextrose agar and dwarfed colonies on minimal medium agar plates containing glucose, xylan, lactose, xylose, or glycerol as the sole carbon source. The representative mutant strain, SUS2/Trcot1i, also displayed reduced mycelia accumulation but hyperbranching in the MM glucose liquid medium, with hyphal growth unit length values decreased to 73.0 ㎛/tip compared to 239.8 ㎛/tip for the parent strain SUS2. The hyperbranching phenotype led to slightly but significantly increased cellulase secretion from 24 to 72 h in a batch culture. However, the cellulase production per unit of mycelial biomass was much more profoundly improved from 24 to 96 h.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.181-192
• /
• 2015

본 연구는 Liquid Crystal Display (LCD) 세척 후 발생하는 Propylene Glycol Monomethyl Ether Acetate (PGMEA)폐액 재활용을 위한 2기 증류탑을 사용하는 공정의 최적 조건을 산출하였다. 공정조건 최적화 기법으로 다중회귀분석을 이용하여 1차 증류 시 Bottom 온도(BTM 온도), Reflux 량, Feed 량 및 Feed 온도에 따라 PGMEA 함량에 대한 최적 조건과 2차 증류 시 BTM 온도, Reflux 량, Feed 량에 따른 PGMEA 함량에 대한 최적 조건과 공정인자를 산출하였다. 1차 증류탑의 공정인자 중 Reflux 량, Feed 온도 및 Feed 량이 중요한 인자로 산출되었다. 본 연구의 공정조건 범위에서는 BTM 온도범위가 PGMEA함량에 크게 영향을 주지 못하였다. 따라서 최적 공정 조건은 Feed 량 $5,700{\ell}$, Reflux 량 $2,500{\ell}$, BTM 온도 $165^{\circ}C$ 및 Feed 온도 $130^{\circ}C$이며 이때 예측된 PGMEA 함량은 92.12~94.62%로 산출되었다. 2차 증류탑에서는 Reflux 량이 함량에 많은 영향을 미치고 있으며, Feed 량과 BTM 온도도 영향을 미치는 인자로 산출되었다. 다중공선성(Multicollinearity)이 Reflux 량과 BTM 온도 간에 강한 양의 상관관계가 있어, 두 인자 중 다중회귀식에 영향이 지배적인 인자 하나를 선택하였으며, 최적조건은 BTM 온도 $199^{\circ}C$ 기준에서 최적 공정 조건은 Feed 량 $4,275{\ell}$ 및 Reflux 량 $6,200{\ell}$이며, 이때 예측 PGMEA 함량은 99.0~99.5%로 산출되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권2호
• /
• pp.282-289
• /
• 2003

Animal feed additives are used worldwide for many different reasons. Some help to cover the needs of essential nutrients and others to increase growth performance, feed intake and therefore optimize feed utilization. The health status of animals with a high growth performance is a predominant argument in the choice of feed additives. The use of feed additives is more and more questioned by the consumers. Therefore, the feed industry is highly interested in valuable alternatives which could be accepted by the consumers. Probiotics, prebiotics, enzymes and highly available minerals as well as herbs can be seen as alternatives. Herbs, spices and their extracts (botanicals) have a wide range of activities. They can stimulate feed intake and endogenous secretions or have antimicrobial, coccidiostatic or anthelmintic activity. A major field of application of herbs is the protection of animals and their products against oxidation.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.78-87
• /
• 1997

In machine tools, frictional force exists between the table and the guideways, and in ballscrews. In this paper, feed motor current measured by a hall sensor is used to calculate the motor torque. Some frictional phenomena are studied in feed drive systems, such as the relationship between feedrate and frictional torque, and chip cover effects on frictional torque. Considering frictional phenomena, the relation- ship between the feed froce and the feed motor current id obtained. Feed force can be well estimated by feed motor current measurement considering frictional behavior. The relationship between the cutting force and the feed motor current is slightly different between up milling and down milling due to the effect of y direc- tional cutting force on frictional torque.

• 한국가금학회지
• /
• 제8권1호
• /
• pp.31-36
• /
• 1981

This study was conducted to investigate how much total feed cost can be curtailed by the application of linear programming compared with the conventional hand calculating method in determining the feed formula in feed mill. Data were collected from a feed mill producing 19 different kinds of feed and having capacity of producing 5,000 tons of feed a month. According to the results of analysis, the least-cost feed formulation by linear programming showed a decrease of 4,793,172 won monthly in total feed cost as compared with the conventional hand calculating method. But, to confirm the results of this study, it is necessary to conduct further emperical studies.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.37-47
• /
• 1998

This study discusses the feed dog feeding mechanism of an industrial lock stitch sewing machine, which is a good example to study a machine kinematics. The feed dog feeding mechanism makes the fabrics directly be fed by an elliptic motion of the feed dog that is moved by a rotation of the top shaft and controlled by the feeding control mechanism. This study makes mathematical expressions of machine's motion in the feed dog feeding mechanism. Thus, the motions of this mechanism are characterized, namely how an elliptic motion of the feed dog is affected by the feeding control mechanism. Therefore, the above mathematical expressions may be a basis for the new design of the feed dog feeding mechanism and may be adapted to analysis. Development of the similar feed dog feeding mechanism can be applied to other type sewing machine.

• Ocean Systems Engineering
• /
• 제2권1호
• /
• pp.49-68
• /
• 2012

In this paper, an offshore process front end engineering design (FEED) method is systematically introduced and reviewed to enable efficient offshore oil and gas production plant engineering. An integrated process engineering environment is also presented for the topside systems of a liquefied natural gas floating production, storage, and offloading (LNG FPSO) unit, based on the concepts and procedures for the process FEED of general offshore production plants. Various activities of the general process FEED scheme are first summarized, and then the offshore process FEED method, which is applicable to all types of offshore oil and gas production plants, is presented. The integrated process engineering environment is presented according to the aforementioned FEED method. Finally, the offshore process FEED method is applied to the topside systems of an LNG FPSO in order to verify the validity and applicability of the FEED method.

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.164-170
• /
• 2016

A proposed pneumatic cylinder-driven roll feeder and an air press were designed to be operated automatically by a PLC. The accuracy of the intermittent feed pitch of the roll feeder was evaluated by measuring lengths of cut-offs of a strip stock by a digimatic vernier caliper. At each predetermined feed pitch, the proposed roll feeder was tested 100 times by varying the feed/cut intervals as 2.0/1.5, 3.0/2.0, and 3.5/2.5 s as test sets. The lengths of the cutoffs of the strip stock ranged from 9.89-10.34, 12.1-12.65, and 15.21-15.67 mm at the predetermined 10, 12, and 15 mm feed pitch, respectively, among the total of 300 samples in each feed pitch, regardless of the feed/shear interval. Therefore, the feed/cut interval at each selected feed pitch was found to have no effect on the accuracy of the intermittent advancing of the strip stock.