• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1016-1023
• /
• 2006

The water content of dewatered cake produced from belt press dewatering equipment was about 75 wt% which was some high to handle it, so the equipment contained a limit at the economical and environmental aspect. The thermal dewatering equipment built as an alternative to overcome several problems was set up at the sludge treatment field and estimated some feasibility as comparison with the dewatering performance of belt press. First, dewatering properties of waterworks sludge was analyzed by monthly. The sludge of a water shortage season contained a high organic content which led to be difficult to dewater the cake, the other side the sludge of rainwater season was ease to dewater because of low organic content. According to the results to analysis the water content of dewatered cake produced from two equipments on the base of the seasonal dewatering properties, the water content of dewatered cake produced from thermal dewatering for sludge of water shortage season was $41.6{\sim}48.3$ wt% and $71{\sim}84$ wt% from belt press. In the case of rainwater season, the water content of dewatered cake produced from thermal dewatering was $34{\sim}37.7$ wt% and $57{\sim}70$ wt% from belt press. It was understood that thereduction of water content of cake by thermal dewatering was larger than belt press. The economical aspect for two equipments was evaluated on considering the reduction of cake treatment amount as the decrease of water content of cake. When putting the cost index of thermal dewatering into 100, belt press was 121. This meant that thermal dewater was more economical than belt press by about 20% in the side of construction and operation. In conclusion, thermal dewatering equipment was estimated by producing the low water content dewatered cake as well as being operated with low coat.

• Journal of Korean Public Health Nursing
• /
• v.8 no.2
• /
• pp.35-56
• /
• 1994

This article was intended to survey whether Roy' Adapation model ('Roy Model') can be applied to family health assessment and to study whether application of the Roy Model to a Korean family is feasible. under the Roy Model, a family is viewed as an adaptation system having a series of process of input. process, feedback, and output. Further, the Roy Model indicates that a family contains Physiolosical, self-concept. role function and interdependent mode in respect of internal or external stimuli. In the event where the family health assessed, the adaptation mode of that family must be assess at the first stage. Then, the focal, contextual, residual stimuli affecting the family must be assessed. In 1984 Hanson suggested four types of family adaptation mode based upon the Roy Model and thereby enhanced the possibility for family health assessment. In order survey whether the Roy Model can be applied to the Korean family, the author of this article contracted adults of 169 who live in 'A' city to make open questions regarding family and then analyzed responses from them by utilizing Roy model. This study categorized family Adaptation mode based upon the' four types of family adaptation mode developed by Hanson. As a result of this study, family adaptation mode was categorized into 117 concepts. Those 117 concepts are consisted or Physiolosical mode of 47. self­concept mode of 56, role function mode of 9 and interdependent mode of 5. Further. stimuli affecting family were classified based upon Roy's definition as to three types of stimuli. Stimuli on a family are comprised focal stimuli concept of 19, contextual stimuli concepts of 19, one residual stimuli concept. this result implies that the Roy's Model can be applied to Korean family. Physiological mode shows meaning of survival. while self-concept mode reflects meaning of growth and emphasizes harmony among the family based on the familism. The role function mode shows continuity rather control of family member. By contrast, interdependent mode shows interaction with community to which the family belongs. but the degree of interaction does not appear too high. The analysis of family stimuli led this study to conclude that troubles within a family. changes in family structure and diease of family member generate stimuli. However, an application of the Roy Model contains the following problems: First, Roy argued that the family adaptation mode should be assessed at the first level family health assessment and then stimuli affecting family adaptation should be adaptation assessed at the second stage. To the belief of the author of this article. however, for checking family adaptation level. focal, contextual, residual stimuli should be confirmed by assessing stimuli at first stage. Then, the family adaptation mode in respect of such stimuli should be assessed. The rationale for this is that the family adaptation level is determined depending on degree of strength of focal. contextual. residual stimuli. Second. Whall (1991) raised a question 'Does one assess family adaptation mode and intervene in the stimuli?' 'Likewise, assessment of the family adaptation should be made in the following manner in order for family health to be enhanced. Third. Roy believes that additional stimuli (such as contextual and residual) are same as internal process (including nurturance. support, and socialization). However, the basis for this Roy's belief is not too clear. In spite of these problems which the author indicated above, it can be concluded that the Roy Model can serve as a good device for an assessment of family health and that the Roy Model can be applied to a Korean family. Finally, further research of family adaptation theory and family nursing theory is required for a development of these theories.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.125-146
• /
• 2013

Nowadays, the performance of the mobile game sales is influencing the ranking of game companies listed on KOSDAQ. In the meantime, venture capital companies had focused on online game. Recently, however, they have great interest in mobile games and mobile game companies. In addition, angel investors and accelerators are increasing investment for the mobile game companies. The most important issues for mobile game investor is how to evaluate the mobile game companies and their contents. Therefore, this study derived the evaluation factors for the mobile game company. And research method converged of the opinions of both supply side and demand side of the game industry. Ten professionals who are responsible for the supply of the game industry and CEO group & development experts of game development company were selected for survey in this study. Also ten professionals who are responsible for the demand of the game industry and the investment company were selected for survey in this study. And Delphi technique was performed according to the survey. Management skills, development capabilities, game play, feasibility, operational capabilities has emerged as five evaluation factors to evaluate the mobile game company. And the 20 sub-factors including CEO's reliability were derived. AHP(Analytic Hierarchy Process) theory is applied to analyze the importance of the qualitative elements which were derived by Delphi technique. As a result, the analysis hierarchy of evaluation factors for the mobile game company was created. Pair-wise comparison for each element was performed to analyze the importance. As a result, 'Core fun of the game' (12,2%), 'Involvement of the game' (10.3%), 'Security Reliability' (8.9%), 'Core developers' ability' (7.6%) appeared in order of importance. The significance of this study is offering more objective methodology for realistic assessment and importance of elements to evaluate mobile game company.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.65-78
• /
• 1997

This study was carried out in order to determine soft tissue response to incisor movement and mandibular repositioning and to determine feasibility of predicting vertical and horizontal changes in soft tissue with hard tissue movement. For this study, cephalometric records of 41 orthodontically treated adult females who had Angle's Class II division 1 malocclusion were selected and stepwise multiple regression analysis was employed. Following conclusions were obtained by analysing the changes of soft tissue and hard tissue before and after treatment. 1. Hard tissue measurements that showed significant changes before and after treatment were horizontal and angular changes of maxillary incisor, horizontal,vertical and angular changes of mandibular incisor, overjet, overbite, interincisal angle, mandibular repositioning, A,B, skeletal convexity and soft tissue measurements that showed significant changes were horizontal, thickness and angular changes of upper lip, horizontal and angular changes of lower lip, interlabial angle, nasolabial angle labiomental angle, Sri, Ss, Si and soft tissue convexity(P<0.05). 2. All Soft tissue measurements changed significantly before and after treatment had between one and four hard tissue independent variables at statistically significant level, indicating that all soft tissue changes were direct relationship with hard tissue changes 3. Ova jet, horizontal change of maxillary incisor, horizontal change of maxillary root apex and horizontal change of pogonion entered into prediction equations most frequentely indicating that they were more significant variables in prediction of vertical and horizontal changes in the soft tissue with treatment, but vertical changes of mandibular incisor not entered any prediction equations, indicating that it was not considered a good predictor for soft tissue changes with maxillary incisor retraction. 4. Horizontal and vertical changes in subnasale were found to have most independent variables, significant at the 0.05 level in prediction-equations(${\Delta}$Sn(H):Ur, Is(H), Pg(H), UIA,${\Delta}$Sn(V): Is(H), Pg(H), overjet, A), indicating that subnasale changes are influenced by complex hard tissue interaction. 5. Multiple correlation coefficient($R^2$) of the soft tissue prediction equations ranges from 0.2-0.6.

• Management & Information Systems Review
• /
• v.35 no.4
• /
• pp.169-184
• /
• 2016

Deferred tax assets (liability) in a company's financial statements are to reflect the temporary difference between taxable income and accounting income and therefore can provide useful information as a proxy for discretionary accruals. In addition, deferred tax assets allow a company to manage its earnings by reviewing the feasibility of the assets' recognition. As such, this study focused on deferred tax assets to examine their relationship with discretionary accruals, which were measured by a modified Jones model (Dechow et al. 1995), and investigated the impact of audit quality on this relationship. In order to control for the effects of tax rate change and measurement credibility, deferred tax assets of 2,670 non-financial firms from 2009 to 2010 were collected as samples for the study. The results of the empirical analysis are as follows. First, the samples as a whole indicated that deferred tax assets have a negative relationship with discretionary accruals in a general sense, but a high-quality audit did not reveal a significant relationship between them. Second, the 1,379 samples with negative discretionary accruals did not reveal a significant relationship between deferred tax assets and discretionary accruals; however, the result showed a significant negative relationship under a high-quality audit. These findings suggest that in the case of negative discretionary accruals, a high-quality audit restricts an earnings management technique that utilizes deferred tax assets and that the assets can be a useful tool for detecting discretionary accruals. The present study is meaningful in that, unlike previous research, it combined the two contrasting roles of deferred tax assets-that of an earnings management detector and an earnings management tool-to examine their general relationship. The study also suggested that audit quality could influence the usefulness of deferred tax assets in providing information on discretionary accruals.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.650-658
• /
• 2006

The recycling of TDA from solid waste of TDI plant(TDI-R) by near-critical hydrolysis reaction had been studied by means of a statistical design of experiment. The main and interaction effects of process variables had been defined from the experiments in a batch reactor and the correlation equation with process variables for TDA yield had been obtained from the experiments in a continuous pilot plant. It was confirmed that the effects of reaction temperature, catalyst type and concentration, and the weight ratio of water to TDI-R(WR) on TDA yield were significant. TDA yield decreased with increases in reaction temperature and catalyst concentration, and increased with an increase in WR. As a catalyst, NaOH was more effective than $Na_2CO_3$ for TDA yield. The interaction effects between catalyst concentration and temperature, WR and temperature, catalyst type and reaction time on TDA yield had been defined as significant. Although the effect of catalyst concentration on TDA yield at $300^{\circ}C$ as subcritical water was insignificant, the TDA yield decreased with increasing catalyst concentration at $400^{\circ}C$ as supercritical water. On the other hand, the yield increased with an increase in WR at $300^{\circ}C$ but showed negligible effect with WR at $400^{\circ}C$. The optimization of process variables for TDA yield has been explored with a pilot plant for scale-up. The catalyst concentration and WR were selected as process variables with respect to economic feasibility and efficiency. The effects of process variables on TDA yield had been explored by means of central composite design. The TDA yield increased with an increase in catalyst concentration. It showed maximum value at below 2.5 of WR and then decreased with an increase in WR. However, the ratio at which the TDA yield showed a maximum value increased with increasing catalyst concentration. The correlation equation of a quadratic model with catalyst concentration and WR had been obtained by the regression analysis of experimental results in a pilot plant.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.1-11
• /
• 2012

This study focused on establishing a natural rainwater circulation system using rainwater meant for relatively large urban development projects such as a new town development. In particular, when the location selection techniques for individual elements of a natural rainwater circulation system are developed for the integrated rainwater management, changes in hydrological environment will be minimized and the natural water circulation would be restored to realize the low impact development (LID). In that case, not only the excess will be reduced but water space and green areas in a city would also increase to improve the urban sustainability. First of all, there were five elements selected for the location selection of a rainwater circulation system intended for the integrated rainwater management: rainwater collection, infiltration, filtration, retention and movement spaces. After generating these items, the location selection items and criteria were defined for each of the five elements. For a technique to apply the generated evaluation items and criteria, a grid cell analysis was conducted based m the suitability index theory, and thematic maps were overlapped through suitability assessment of each element and graded based on the suitability index. The priority areas were identified for each element. The developed technique was applied to a site where Gim-cheon Innovation City development is planned to review its feasibility and limitations. The combined score of the overlapped map for each element was separated into five levels: very low, low, moderate, high and very high. Finally, it was concluded that creating a rainwater circulation system conceptual map m the current land use plan based on the outcome of the application would be useful in building a water circulation system at the de1ailed space planning stage after environmental and ecological planning. Furthermore, we use the results of this study as a means for environment-friendly urban planning for sustainable urban development.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.589-601
• /
• 2010

Recently it has been frequently reported arsenic contamination of geologic origin in groundwater. The iron-impregnated ranular activated carbon (Fe-GAC) was developed for effective removal of arsenic from groundwater n the study. Fe-GACs were prepared by impregnating iron compounds into a supporting medium (GAC) with 0.05 M iron nitrate solution. The materials were used in arsenic adsorption isotherm tests to know the effect of iron impregnation time, batch kinetic tests to understand the influence of pH, and column tests to evaluate for the preliminary operation of water treatment system. The results showed that the minimum twelve hours of impregnation time were required for making the Fe-GAC with sufficient iron content for arsenic removal, confirmed by a high arsenic adsorption capacity evaluated in the isotherm tests. Most of the impregnated iron compounds were iron hydroxynitrate $Fe_4(OH)_{11}NO_3{\cdot}2H_2O$ but a mall quantity of hematite was also identified in X-ray diffraction(XRD) analysis. The batch isotherms of Fe-GAC for arsenic adsorption were well explained by Langmuir than Freundlich model and the iron contents of Fe-GAC have positive linear correlations on logarithmic plots with Freundlich distribution coefficients ($K_F$ and Langmuir maximum adsorption capacities ($Q_m$. The results of kinetic experiments suggested hat Fe-GAC had he excellent arsenic adsorption capacities regardless of all pH conditions except for pH 11 and could be used a promising adsorbents for groundwater arsenic removal considering the general groundwater pH range of 6-8. The pseudo-second order model, based on the assumption that the ate-limiting step might be chemisorption, provided the best correlation of the kinetic experimental data and explained the arsenic adsorption system f Fe-GAC. The column test was conducted to valuate the feasibility of Fe-GAC use and the operation parameters in arsenic groundwater treatment system. The parameters obtained from the column test were the retardation actor of 482.4 and the distribution coefficient of 581.1 L/mg which were similar values of 511.5-592.5 L/mg acquired from Freundlich batch isotherm model. The results of this study suggested that Fe-GAC could be used as promising adsorbent of arsenic removal in a small groundwater supply system with water treatment facility.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.101-110
• /
• 2014

This study analyzes the validity of the type classification of the type and design changes of apartment landscaping planting construction design changes that were completed in the private sector, efficiently manages the design changes that are displayed over landscaping planting work in general in the future, and performs research by placing the object underlying the presentation. The results are as follows. First, the percentage that occurred in the planting construction of design changes that have occurred in the apartment landscaping construction was carried out in the private sector and accounted for 61.8%. This indicates that part of the planting is a major design change. Second, as the cause of such a design change to be those associated with the field conditions such as lack of main construction period. In particular, due to a change in oral, appeared 7-48 times design changes of one review design change approval is complex, design changes of planting construction had shown a feature that occurs in multiple simultaneous. Third, the 7 types of Design Changes in planting design were delineated as 'design changes for consideration of the user', 'design changes for image improvement', 'design changes for ease of maintenance', 'design changes due to the mismatch of design statement', 'design changes due to the relationship with the engineering species of other', 'design changes due to lack of field study', and 'design changes due to the consideration of feasibility.' Fourth, 'design changes for consideration of the user' and 'design changes for image improvement' were found in more than half of the frequency of the overall changes. This differed from the results shown in public corporations. Fifth, if planting construction design change process, private companies, it was found that is showing the approval of the practice after the previous construction of the construction cost savings due to construction time. However, in the case of a public corporation, these exhibited a different aspect from the private sector and show a design change procedure that reflects the changes after the design change events in the field have occurred. The above results, the type of landscaping works in planting design change of public enterprises, regardless of the private sector, is the same in the seven types, the main reason of and procedures for design changes, indicating that there are other respects. In design change, it may be desirable to apply becomes liquidity rationality and efficiency of the dimension, depending on the nature of the landscape construction.

• Journal of Chest Surgery
• /
• v.40 no.6 s.275
• /
• pp.428-434
• /
• 2007

Background: Recent studies have suggested that UFT may be an effective adjuvant therapy for completely resected IB (pT2N0) non-small cell lung cancer (NSCLC). We designed this study to clarify the feasibility of performing adjuvant chemotherapy with UFT for completely resected IB nor-small cell lung cancer, Material and Method: We randomly assigned patients suffering with completely resected IB non-small cell lung cancer to receive either UFT 3g for 2 year or they received no treatment. All patients had to be followed until death or the cut-off date (December 31 2006). Result: From June 2002 through December 2004, 64 patients were enrolled. Thirty five patients were assigned to receive UFT (the UFT group) and 29 patients were assigned to observation (the control group). A follow-up surrey on the 3 year survival rate was successfully completed for all the patients. The median follow-up time for all the patients was 32.8 months. In the UFT group, the median time of administration was 98 weeks (range: $2{\sim}129$ weeks). The rate of compliance was 88.2% at 6 months, 87.5% at 12 months, 80.6% at 18 month and 66.7% at 24 months. Seven recurrences (24.1%) occurred in the control group and six (17.1%) occurred in the UFT group (p=0,489). The three-year disease free survival rate was 71.3% for the control group and 82.0% for the UFT group (p=0.331). On the subgroup analysis, the three-year disease free survival rate for the patients with adenocacinoma was 45.0% for the control group and 75.2% for the UFT group (p=0.121). The three-year disease free survival rate for the patients with non-adenocarcinoma was 88.1% for the control group and 88.9% for the UFT group (p=0.964), Conclusion: Postoperative oral administration of UFT was well-tolerated. Adjuvant chemotherapy with UFT for completely resected pT2N0 adenocarcinoma of the lung could be expected to improve the disease free survival, but this failed to achieve statistical significance. A prospective randomized study for a large number of patients will be necessary.