• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.109-114
• /
• 2024

Enterprise storage systems that require high data reliability are applying RAID (Redundant Array of Independent Disks) systems to recover from data loss and failure. In particular, RAID 5 ensures space efficiency and reliability by distributing parity across multiple storage devices. However, when storage devices have different capacities, RAID is built based on the smallest capacity storage device, resulting in wasted storage space. Therefore, research is needed to solve this resource management problem. In this paper, we propose a method for RAID grouping of each independent NAND flash memory block in a RAID consisting of SSD (Solid State Disk) with external SSDs as well as internal SSDs. This method is divided into a policy for delivering block information inside SSDs to the RAID system and a policy for RAID grouping of physical addresses delivered from the RAID system. This method allows us to maintain a RAID that does not waste resources when SSDs of different capacities are grouped into RAID5. Finally, we demonstrate the effectiveness of the proposed method through experiments.

• The Journal of Society for e-Business Studies
• /
• v.20 no.1
• /
• pp.183-199
• /
• 2015

Due to the Four Major Rivers Restoration Project, Nakdong River Estuary Barrage's designed flood quantity has been largely increased, and this has caused to construct several drainage gates at the right side of Eulsukdo island to secure the safety of downstream river area. For successful functioning of Nakdong River Estuary Barrage, such as flood control, disaster prevention, and the securing of sufficient water capacity, drainage gates at the both sides of island have to operate systematically and reliably. To manage this under restricted personnel and resources, we have implemented the IOS (Integrated Operation System) by integrating previous facilities and resources via information and communication technologies. The IOS has been designed to have higher availability and fault tolerance to function continuously even with the partial system's failure under the emergency situation like flood. Operators can use the system easily and acknowledge alarms of facilities through its IWS (Integrated Warning System) earlier. Preparing for Integrated Water Resources Management and Smart Water Grid, the architecture of IOS conformed to open system standards which will be helpful to link with the other systems easily.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

Internet-of-Things(IoT) is the computing environment to provide valuable services by interacting with multiple devices, where diverse devices are connected within the existing Internet infrastructure and acquire context information by sensing. As the concern of IoT has been increased recently, most of the industries develop many IoT devices. And, many people are focused on the IoT application that is utilizing different technologies, which are sensor network, communication technologies, and software engineering. Developing on-ground IoT application is especially even more active in progress depending on increasing of on-ground IoT devices because it is possible for them to access dangerous and inaccessible situation. However, There are a few studies related IoT. Moreover, since on-ground IoT application, which is different from typical software application, has to consider device's characteristics, communication, and surround condition, it reveal challenges, decreasing reliability. Therefore, in this paper, we analyze reliability challenges related to maturity and fault tolerance, one of reliability attributes, occurring in developing on-ground IoT applications and suggest the effective solutions to resolve the challenges. To verify proposed the challenges and solutions, we show result that is applying the solutions to applications. By presenting the case study, we evaluate the effectiveness of applying the solutions to the application.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.157-166
• /
• 2008

The ubiquitous service environment is poor in reliability of connection and also has a high probability that the intrusion against a system and the failure of the services may happen. Therefore, It is very important to guarantee that the legitimate users make use of trustable services from the viewpoint of security without discontinuance or obstacle of the services. In this paper, we point out the problems in the standard Jini service environment and analyze the Jgroup/ARM framework that has been developed in order to help fault tolerance of Jini services. In addition, we propose a secure Jini service architecture to satisfy the security, availability and quality of services on the basis of the analysis. The secure Jini service architecture we propose in this paper is able to protect a Jini system not only from faults such as network partition or server crash, but also from attacks exploiting flaws. It provides security mechanism for dynamic trust establishment among the service entities. Moreover, our secure Jini service architecture does not incur high computation costs to merge the user service states because of allocation of the replica based on each session of a user. Through the experiment on a test-bed, we have confirmed that proposed secure Jini service architecture is able to guarantee the persistence of the user service states at the level that the degradation of services quality is ignorable.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.29-45
• /
• 2017

Ad hoc sensor network is characterized by decentralized structure and ad hoc deployment. Sensor networks have all basic features of ad hoc network except different degrees such as lower mobility and more stringent energy requirements. Existing protocols provide different tradeoffs among some desirable characteristics such as fault tolerance, distributed computation, robustness, scalability and reliability. wireless protocols suggested so far are very limited, generally focusing on communication to a single base station or on aggregating sensor data. The main reason having such restrictions is due to maximum lifetime to maintain network activities. The network lifetime is an important design metric in ad hoc networks. Since every node does a router role, it is not possible for other nodes to communicate with each other if some nodes do not work due to energy lack. In this paper, we suggest an experimental ad-hoc on-demand distance vector routing protocol to optimize the communication of energy of the network nodes.The load distribution avoids the choice of exhausted nodes at the route selection phase, thus balances the use of energy among nodes and maximizing the network lifetime. In transmission control phase, there is a balance between the choice of a high transmission power that lead to increase in the range of signal transmission thus reducing the number of hops and lower power levels that reduces the interference on the expense of network connectivity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2020

As an important basic building block of the smart grid environment, smart meter provides real-time electricity consumption information to the utility. However, ensuring information security and privacy in the smart meter data aggregation process is a non-trivial task. Even though the secure data aggregation for the smart meter has been a lot of attention from both academic and industry researchers in recent years, most of these studies are not secure against internal attackers or cannot provide data integrity. Besides, their computation costs are not satisfactory because the bilinear pairing operation or the hash-to-point operation is performed at the smart meter system. Recently, blockchains or distributed ledgers are an emerging technology that has drawn considerable interest from energy supply firms, startups, technology developers, financial institutions, national governments and the academic community. In particular, blockchains are identified as having the potential to bring significant benefits and innovation for the electricity consumption network. This study suggests a distributed, privacy-preserving, and simple secure smart meter data aggregation system, backed up by Blockchain technology. Smart meter data are aggregated and verified by a hierarchical Merkle tree, in which the consensus protocol is supported by the practical Byzantine fault tolerance algorithm.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1166-1176
• /
• 1999

연속 매체, 특히 비디오 데이타에 대한 일반 사용자 연산에는 재생뿐만 아니라 임의 속도 탐색 연산, 정지 연산, 그리고 그 외 다양한 연산이 있다. 이 연산 중에서 원하는 화면을 빨리 찾는 데에 유용한 고속 전진(FF: fast-forward)과 고속 후진(FB: fast-backward)은 재생 연산과는 달리 비순차적인 디스크 접근을 요구한다. 이러한 경우에 디스크 부하가 균등하지 않으면 일부 디스크에 접근이 편중되어 서비스 품질이 떨어진다. 본 논문에서는 디스크 배열을 이용한 저장 시스템에서 디스크 접근을 고르게 분산시키기 위하여 '소수 라운드 로빈(PRR: Prime Round Robin)' 방식으로 연속 매체를 디스크에 배치하는 기법에서 문제가 됐던 낭비된 디스크 저장 공간을 신뢰도 향상을 위해서 사용하는 '그룹화된 패리티를 갖는 소수 라운드 로빈(PRRgp: PRR with Grouped Parities)' 방식을 제안한다. 이 기법은 PRR 기법처럼 임의 속도 검색 연산에 있어서 디스크 배열을 구성하는 모든 디스크의 부하를 균등하게 할뿐만 아니라 낭비됐던 디스크 저장 공간에 신뢰도를 높이기 위한 패리티 정보를 저장함으로서 신뢰도를 향상시킬 수 있다. 신뢰도 모델링 방법으로 조합 모델과 마르코프 모델을 이용해서 결함발생율과 결함복구율을 고려한 신뢰도를 산출하고 비교.분석한다. PRR 기법으로 연속 매체를 저장하고 낭비되는 공간에 패리티 정보를 저장할 경우에 동시에 두 개 이상의 결함 발생 시에 그 결함으로부터 복구가 불가능하지만 PRRgp 기법에서는 약 30% 이상의경우에 대해서 동시에 두 개의 결함 발생 시에 저장한 패리티 정보를 이용한 복구가 가능할 뿐만 아니라 패리티 그룹의 수가 두 개 이상인 경우에는 두 개 이상의 결함에 대해서도 복구가 가능하다.Abstract End-user operations on continuous media (say video data) consist of arbitrary-rate search, pause, and others as well as normal-rate play. FF(fast-forward) / FB(fast-backward) among those operations are desirable to find out the scene of interest but they require non-sequential access of disks. When accesses are clustered to several disks without considering load balance, high quality services in playback may not be available. In this paper, we propose a new disk placement scheme, called PRRgp(Prime Round Robin with Grouped Parities), with enhanced reliability by using the wasted disk storage space in an old one(PRR: Prime Round Robin), in which continuous media are placed on a disk array based storage systems to distribute disk accesses uniformly. The PRRgp can not only achieve load balance of disks consisting of a disk array under arbitrary-rate search like PRR, but also improve reliability by storing parity information on the wasted disk space appropriately. We use combinatorial and Markov models to evaluate the reliability for a disk array and to analyze the results. When continuous media like PRR are placed and parity information on the wasted disk space is stored, we cannot tolerate more than two simultaneous faults. But they can be recovered by using stored parity information for about 30 percent as a whole in case of PRRgp presented in this paper. In addition, more than two faults can be tolerated in case there are more than two parity groups.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.507-513
• /
• 2006

In this paper, we propose an improved image encryption and fault-tolerance decryption method using phase wrapping and phase encoding in the frequency domain. To generate an encrypted image, an encrypting key which denotes the product of a phase-encoded virtual image, not an original image, and a random phase image is zero-padded and Fourier transformed and its real-valued data is phase-encoded. The decryption process is simply performed by performing the inverse Fourier transform for multiplication of the encrypted key with the decrypting key, made of the proposed phase wrapping method, in the output plane with a spatial filter. This process has the advantages of solving optical alignment and pixel-to-pixel mapping problems. The proposed method using the virtual image, which does not contain any information from the original image, prevents the possibility of counterfeiting from unauthorized people and also can be used as a current spatial light modulator technology by phase encoding of the real-valued data. Computer simulations show the validity of the encryption scheme and the robustness to noise of the encrypted key or the decryption key in the proposed technique.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.187-198
• /
• 2012

International standard for software quality evaluation, ISO/IEC 9126 defines the quality characteristics and sub-characteristics consisting of quality of the software. Also, in this standard, the quality assessment items are presented in metrics based on maturity, fault tolerance, recoverability and compliance which are sub-characteristics of reliability. However, this reliability assessment items which are presented are not applied now due to the mathematical difficulties and the problems caused by collection of data. In order to resolve these problems, this study introduces measures to develop a specific test technique by quality attributes and to measure the quality. In other words, the detailed guidelines are presented to be utilized as a standard by summarizing test activities and techniques by each development life the most commonly used. The SW quality results are derived by assigning weights to software in order of the most important quality characteristics of respective software using checklist that can be easily utilized and applying test technique that can be utilized for detailed evaluation items and checklist. This improves problems that include reliability assessment item of ISO/IEC 9126 as the measures to measure new reliability quality of software.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.86-96
• /
• 2022

The development trend of jet fighter's avionics system architecture is the digitization of subsystem component functions, increased RF sensor sharing, fiber optic channel networks, and modularized integrated structures. The avionics system architecture of the fifth generation jet fighters (F-22, F-35) has evolved into an integrated modular avionics system based on computing function integration and RF integrated sensor systems. The integrated modular avionics system of jet fighters should provide improved combat power, fault tolerance, and ease of jet fighter control. To this aim, this paper presents the direction and requirements of the next-generation jet fighter's avionics system architecture through analysis of the fifth generation jet fighter's avionics system architecture. The core challenge of the integrated modularized avionic system architecture requirements for next-generation fighters is to build a platform that integrates major components and sensors into aircraft. In other words, the architecture of the next-generation fighters is standardization of systems, sensor integration of each subsystem through open interfaces, integration of functional elements, network integration, and integration of pilots and fighters to improve their ability to respond and control.