• 한국식생활문화학회지
• /
• 제20권6호
• /
• pp.652-660
• /
• 2005

This study is performed for the investigation of management of personnel, wages, welfare, communication, labor, safety, treatment improvement according to assigned working places(primary, middle and high school). This study is based on the final analysis summarized on the 285 questionnaire answered by employee for school foodservice in Buchon city after distributing total 500 questionnaire. The conclusion of this analysis of study is as following. This report says the reason of this mind is caused by hard work. This investigation says they feel to be compensated with low wages on the contrary their hard working and this caused them to demoralize and increase to give up their jobs. The long tenn vacation like childcare vacation is newly established by present improvement of working condition but this improvement action is ineffective. Many of them are feeling to a fatigue and ill health and the condition of occupational disease as hard work. The present improvement of irregular employee treatment like above cases is not effective. So the rewards and payment shall be considered according to their hard work and the working condition must be improved practically for the settlement of their job without leaving.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.224-231
• /
• 2008

A subway or an underground railway is one of the representative public transportations which lots of people take everyday. Then, subway station, which is also one of the very important public civil infrastructures, generally services for a long period of time. During the service time of stations, they are easily damaged from environmental corrosion, material aging, fatigue, and the coupling effects with long-term loads and extreme loads. Recently, civil construction work on the places near station often creates lots of damages to the station. As these damages accumulate, the performance of station degenerates due to the above factors. They would inevitably reduce the resisting capacity of station against the disaster; even they bring into the collapse of stations with the structural failure under long-term loads and extreme loads. And, if disaster such as earthquake, fire, etc. happens, it causes huge property damage and threatens the human lives. Because of these above reasons, the structural health monitoring system need to be developed for ensuring the safety of station. In this paper, the development directions of the structural health monitoring system with fiber optic sensor and USN for subway station are briefly described.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.385-392
• /
• 2001

The stiffness of pavement is scarcely considered in structural analysis of the superstructure bridge. It will be reasonable in the case of asphalt concrete pavement over concrete deck plate because stiffness of the pavement compared with concrete deck plate can be ignored. Additionally, it is considered correct to do a design with a safety. However, various pavement materials which have even value reaching to the elastic modulus of concrete are applied to the orthotropic steel deck plate which has a relatively less stiffness comparing with the concrete deck plate. In this paper, the steel plate deck of the bridge of real project was modeled considering the pavement stiffness for the FEM analysis and the linear elastic analysis was performed. It was assumed to be perfectly bonded between the steel plate deck and the pavement and the temperature effect was ignored. It was analyzed on the vertical deflection of steel deck plate influencing to the serviceability of pavement and the bending stress of steel deck plate related to the fatigue life. As a result, It was indicated that the structural behavior of the orthotropic steel deck plate could be affected by the stiffness of pavement in some cases.

• Nuclear Engineering and Technology
• /
• 제40권7호
• /
• pp.607-614
• /
• 2008

Since pipes with wall-thinning defects can collapse at fluid pressure that are lower than expected, the collapse moment of wall-thinned pipes should be determined accurately for the safety of nuclear power plants. Wall-thinning defects, which are mostly found in pipe bends and elbows, are mainly caused by flow-accelerated corrosion. This lowers the failure pressure, load-carrying capacity, deformation ability, and fatigue resistance of pipe bends and elbows. This paper offers a support vector regression (SVR) model further enhanced with a fuzzy algorithm for calculation of the collapse moment and for evaluating the integrity of wall-thinned piping systems. The fuzzy support vector regression (FSVR) model is applied to numerical data obtained from finite element analyses of piping systems with wall-thinning defects. In this paper, three FSVR models are developed, respectively, for three data sets divided into extrados, intrados, and crown defects corresponding to three different defect locations. It is known that FSVR models are sufficiently accurate for an integrity evaluation of piping systems from laser or ultrasonic measurements of wall-thinning defects.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.6-12
• /
• 2008

Non-metallic composite overwrap repair methods utilize resin based fiber-reinforced composite materials, which have higher specific strength to weight ratio and stiffness, superior corrosion and fatigue resistance, and substantially reduced weight when compared to carbon steel. Non-metallic repair methods/systems can allow desired functional properties to be achieved at a respectable economic advantage. For example, non-metallic composite repair systems have at least a 50 year design stress of 20 ksi and approximately 25% of the short term tensile strength of fiberglass. For these systems, the contribution of the repaired steel to the load carrying capability need not be considered, as the strength of the repair itself is sufficient to carry the internal pressure. Worldwide experience in the Oil & Gas industry confirms the integrity, durability, inherent permanency, and cost-effectiveness of non-metallic composite repair or rehabilitation systems. A case study of a recent application of a composite repair system in Saudi Aramco resulted in savings of 37% for offshore subsea line and 75% for onshore above grade pipeline job. Maintaining a pipeline can be costly but it is very small in comparison to the cost of a failure. Pipeline proponents must balance maintenance costs with pipeline integrity. The purpose is not just to save money but also to attain a level of safety that is acceptable. This technology involves the use of an epoxy polymer resin based, fiber-reinforced composite sleeve system for rehabilitation and /or repair pipelines.

• Journal of Ginseng Research
• /
• 제42권4호
• /
• pp.549-561
• /
• 2018

Ginseng has been traditionally used for several millennia in Asian countries, including Korea, China, and Japan, not only as a nourishing and tonifying agent but also as a therapeutic agent for a variety of diseases. In recent years, the various effects of red ginseng including immunity improvement, fatigue relief, memory improvement, blood circulation improvement, antioxidation, mitigation of menopausal women's symptoms, and anticancer an effect have been reported in clinical as well as basic research. Around the world, there is a trend of the rising consumption of health functional foods on the level of disease prevention along with increased interest in maintaining health because of population aging and the awareness of lifestyle diseases and chronic diseases. Red ginseng occupies an important position as a health functional food. But till now, international ginseng monographs including those of the World Health Organization have been based on data on white ginseng and have mentioned red ginseng only partly. Therefore, the red ginseng monograph is needed for component of red ginseng, functionality certified as a health functional food in the Korea Food and Drug Administration, major efficacy, action mechanism, and safety. The present red ginseng monograph will contribute to providing accurate information on red ginseng to agencies, businesses, and consumers both in South Korea and abroad.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.35-41
• /
• 2016

The experimental study has been performed through residual stress using the Ti6Al4V, investigate the effect of laser shock peening on laser welding process residual stress of Ti6Al4V welds in a reduce safety weld zone. This research evaluated the effects of shock waves from laser shock peening with a pulsed Nd:YAG laser on Ti6Al4V welding specimens, through the analysis of the residual stress of the specimens. The residual stress could be formed by the depth of 1 mm if the proposed method of reducing the residual stress is performed in the optimal condition. The welded structures and products during the production process increase the mechanical property of repeated stress, which could be expected to extend the fatigue life of the structure.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1051-1057
• /
• 2010

Database for the damage reference by armor piercing bullet test was established for both tube and plate specimens having a range of thickness. As the inclined angles of hit are increasing, it has been found that penetration damage diameter tends to increases accordingly in both specimen of the tube and plate, and such penetration damage diameter on the rear side becomes bigger than those on the front side. The tube specimen showed that the damage becomes bigger when central areas rather than the peripheral were hit. Through the plate test, it also has been found that the penetration ballistic limit for Al alloy is about 25.4mm and that of stainless steel about 12.7mm. From the fatigue analysis results using the database for damage reference, it has been identified whether the safety requirements of military aircraft could be met.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.275-284
• /
• 1991

최근 압력용기, 고압배관, LNG Tank 및 선체등의 구조물 파괴에 대한 안전성을 보증하기 위하여, 구조부재의 표면결함에 대한 균열성장 거동을 파악하는 것이 중요한 과제중에 하나라고 인식되어지고 있다. 본 연구에서는 단일 및 복수표면 결함의 피로균열 성장을 바탕으로 표면에서 관통되기까지의 균열성장 수명의 추정등 실질적이고 일반적인 문제들을 해석할려고 시도하였다. 또한, 복수균열 문제에 적용하기 위하여 복수 언더컷의 합체진전현상을 검토하였으며 단일 언더컷과 복수 언더컷의 전파특성이 유사함을 밝혔다.

• 항공우주기술
• /
• 제12권1호
• /
• pp.54-63
• /
• 2013

항공기의 자세제어를 담당하는 각각의 비행 조종면에 중복안정성 등의 이유로 여러 개의 작동기를 연결하여 사용하고 있다. 다중 작동기들이 동시에 정확하게 같은 위치로 이동하지 않으면 비행조종면에 변형이 발생한다. 그 결과 변형된 조종면이 원래 상태로 복원하려는 힘에 의해 작동기들 간에 force fighting이 발생한다. 게다가 force fighting은 각 장치들의 초기 허용 오차 등에 의해서도 발생한다. 다중 작동기간의 force fighting 현상은 제어정밀도에 영향을 미치고 피로파괴의 원인이 되어 작동기와 비행조종면의 수명을 단축할 수도 있다. 본 논문에서는 두 개의 서보작동기를 사용하는 시스템의 force fighting을 감소하기 위하여 힘되먹임제어를 사용하는 제어기를 설계하였다.