• Physical Therapy Rehabilitation Science
• /
• v.2 no.2
• /
• pp.99-103
• /
• 2013

Objective: Clinical measures that quantify upper extremity function are needed for the accurate evaluation of patients and to plan an intervention strategy. The purpose of this study was to examine the relationship between the Unified Parkinson's Disease Rating Scale (UPDRS)-Motor Exam and upper extremity performance as a quantifying clinical tool of upper extremity function in persons with Parkinson's disease. Design: Cross-sectional study. Methods: Thirty-two idiopathic Parkinson's Disease persons participated in this study. To investigate the relationship between the UPDRS-motor exam, Box and Block test (BBT), and Action Research Arm Test (ARAT) by two physical therapists. The examination took up to 1 hour, and the participants were invited to rest between each clinical measure in order to minimize the effects of fatigue. Clinical measures were assessed while the subjects were in the "on" phase of their medication cycle, generally 1-3 hour after taking their anti-Parkinson's medications. Results: In more affected side, the UPDRS-motor exam was significantly negative correlated with the BBT (p<0.05) but it was not significantly correlated with the ARAT. In less affected side, only positively correlation was significantly shown between BBT and ARAT (p<0.05). On the other hand, between BBT and ARAT were not significantly correlated with the UPDRS-motor exam. Conclusions: The UPDRS-motor exam is effective tool which was significantly correlated with manual dexterity in more affected upper extremity. But The UPDRS-motor exam is not effective tool in less affected upper extremity.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.656-664
• /
• 2016

Gear reducers are widely used for various agricultural machinery applications such as greenhouses, tractors, and agricultural vehicles. However, thermal deformation and surface pitting at gear tooth flank frequently occur in gear reducers due to high torque. Thus, surface heat treatment of gears is required to improve wear and fatigue resistance. The objective of this study was to simulate the load capacity of the agricultural gear reducer. The simulation was performed for the following three surface heat treatment methods: untreated gears, nitriding heat treatment, and induction hardening method, those mostly used for agricultural gear reducers. The load capacity of the gear reducer was simulated using the safety factor, limit bending stress, and limit contact stress of the gear. The simulation of the load capacity was conducted using KISSsoft commercial software for gear analysis. The main results of simulation test were as follows: first, the nitriding heat treatment resulted in the highest safety factor for bending stress, which was increased about 77% from those of the untreated gears. Second, the induction hardening was the highest safety factor for contact stress, which was increased about 150% from those of the untreated gears. The safety factor for contact stress of the induction hardening was increased about 64% from those of the nitriding heat treatment. The study result suggested that the surface heat treatments could enhance load capacity and that the method of surface heat treatment should be determined based on simulation results for appropriate use scenarios.

• Journal of Korean Biological Nursing Science
• /
• v.19 no.3
• /
• pp.191-197
• /
• 2017

Purpose: The aim of this study was to determine the effectiveness of a community-based muscle and joint self-management program with muscle stretching and muscle strengthening exercises for community-dwelling older adults. Methods: The study was a pre-and-post design in a single group, which examined the effects after the intervention of muscle and joint self-management program for 6 weeks, on the 42 subjects of the elderly who registered in a Community Senior Center in J city. Data analyses were conducted with paired t-test by using a SAS (version 9.2 for Windows) program. Results: The effectiveness of muscle and joint self-management program on shoulder flexibility and right knee extension (flexibility) were significantly improved (t= 2.72, p= .010; t= -2.26, p= .029). Joint symptoms (pain, stiffness), physical functioning, depression, fatigue, and left knee extension were not significantly improved after the muscle and joint self-management program. Conclusion: The results showed the possibility of this 6-week exercise program in improving shoulder and knee flexibility for community-dwelling older adults.

• Structural Engineering and Mechanics
• /
• v.63 no.6
• /
• pp.809-824
• /
• 2017

The accurate evaluation of wind characteristics and wind-induced structural responses during a typhoon is of significant importance for bridge design and safety assessment. This paper presents an expectation maximization (EM) algorithm-based angular-linear approach for probabilistic modeling of field-measured wind characteristics. The proposed method has been applied to model the wind speed and direction data during typhoons recorded by the structural health monitoring (SHM) system instrumented on the arch Jiubao Bridge located in Hangzhou, China. In the summer of 2015, three typhoons, i.e., Typhoon Chan-hom, Typhoon Soudelor and Typhoon Goni, made landfall in the east of China and then struck the Jiubao Bridge. By analyzing the wind monitoring data such as the wind speed and direction measured by three anemometers during typhoons, the wind characteristics during typhoons are derived, including the average wind speed and direction, turbulence intensity, gust factor, turbulence integral scale, and power spectral density (PSD). An EM algorithm-based angular-linear modeling approach is proposed for modeling the joint distribution of the wind speed and direction. For the marginal distribution of the wind speed, the finite mixture of two-parameter Weibull distribution is employed, and the finite mixture of von Mises distribution is used to represent the wind direction. The parameters of each distribution model are estimated by use of the EM algorithm, and the optimal model is determined by the values of $R^2$ statistic and the Akaike's information criterion (AIC). The results indicate that the stochastic properties of the wind field around the bridge site during typhoons are effectively characterized by the proposed EM algorithm-based angular-linear modeling approach. The formulated joint distribution of the wind speed and direction can serve as a solid foundation for the purpose of accurately evaluating the typhoon-induced fatigue damage of long-span bridges.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.1
• /
• pp.65-72
• /
• 2018

PURPOSE. The aim of this in vitro study was to investigate the fracture resistance under chewing simulation of implant-supported posterior restorations (crowns cemented to hybrid-abutments) made of different all-ceramic materials. MATERIALS AND METHODS. Monolithic zirconia (MZr) and monolithic lithium disilicate (MLD) crowns for mandibular first molar were fabricated using computer-aided design/computer-aided manufacturing technology and then cemented to zirconia hybrid-abutments (Ti-based). Each group was divided into two subgroups (n=10): (A) control group, crowns were subjected to single load to fracture; (B) test group, crowns underwent chewing simulation using multiple loads for 1.2 million cycles at 1.2 Hz with simultaneous thermocycling between $5^{\circ}C$ and $55^{\circ}C$. Data was statistically analyzed with one-way ANOVA and a Post-Hoc test. RESULTS. All tested crowns survived chewing simulation resulting in 100% survival rate. However, wear facets were observed on all the crowns at the occlusal contact point. Fracture load of monolithic lithium disilicate crowns was statistically significantly lower than that of monolithic zirconia crowns. Also, fracture load was significantly reduced in both of the all-ceramic materials after exposure to chewing simulation and thermocycling. Crowns of all test groups exhibited cohesive fracture within the monolithic crown structure only, and no abutment fractures or screw loosening were observed. CONCLUSION. When supported by implants, monolithic zirconia restorations cemented to hybrid abutments withstand masticatory forces. Also, fatigue loading accompanied by simultaneous thermocycling significantly reduces the strength of both of the all-ceramic materials. Moreover, further research is needed to define potentials, limits, and long-term serviceability of the materials and hybrid abutments.

• Korean Journal of Adult Nursing
• /
• v.13 no.3
• /
• pp.420-430
• /
• 2001

This study was designed to verify the effect of aromatherapy on menstrual cramps and dysmenorrhea by a quasi experiment (nonequivalent control group pretest-posttest design), from March to October, 2000. The subjects of this experiment consisted of 45 college women with menstrual cramps and dysmenorrhea. They were randomized by 25 for the experimental group and 20 for the control group. Their mean age was 20.6 years, mean menstrual period 28.7 days, mean menstrual cramps(VAS) 7.25, mean dysmenorrhea (Dysmenorrhea Scale) was 27.34. As treatment, aromatherapy was to give effleurrage of the abdomen with lavender, clary sage and rose as aroma oil, almond oil as carrier oil. For the control group, abdominal massage was given with only almond oil. Data collection included menstrual cramps, dysmenorrhea, the change of symptoms(low abdominal pain, lumbago, headache, nausea, fatigue, edema). Menstrual cramps, dysmenorrhea and general, menstrual characteristics of subjects were measured the first day of the pre menstrual period before treatment (pre-test), menstrual cramps, dysmenorrhea, the change of symptoms were measured the first and second day of post menstrual period after treatment (posttest). Data were analyzed by t-test, $\chi^2$- test, repeated measures ANOVA, Cronbach's ${\alpha}$ with SAS Program. The results of this study was as follows; 1. Menstrual cramps was significantly lower in the experimental group(p = .001). 2. Dysmenorrhea was significantly lower in the experimental group(p = .027). 3. Less women in the experimental group complained about the six symptoms than women in the control group after treatment on the first day of the menstrual period(p < 0.05, p < 0.01) In conclusion, these findings indicate that aromatherapy with lavender, clary sage, and rose could be effective to decrease menstrual cramps, and dysmenorrhea. So, aromatherapy could be applied to women suffering with menstrual cramps, dysmenorrhea periodically as an nursing intervention.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.182-188
• /
• 2017

Objective: The purpose of this study was to compare ankle function between adults with and without Down syndrome (DS). Design: Cross-sectional study. Methods: Ten adults with DS and 18 without participated in this study and underwent manual muscle test (MMT), range of motion (ROM) assessment, star excursion balance test (SEBT), and functional movement screen (FMS). The tests were demonstrated to increase their accuracy and the actual measurements were assessed after one or two demonstrations. To minimize the standby time and fatigue, the travelled distance and measuring order were adjusted. To remove the influence of shoes on the measurements, the shoes were taken off and only socks were worn. Results: Dorsal and plantar flexion MMTs of both ankles were significantly weaker and plantar flexion ROM of both ankles were significantly lower in adults with DS compared with those without (p<0.05). However, dorsal flexion ROM of both ankles were not significantly different between them. There were significant differences in distances measured in all the directions (anterior, anterolateral, lateral, posterolateral, posterior, posteromedial, medial, and anteromedial directions) of SEBT (p<0.05). Significant differences were also demonstrated in the scores of hurdle step, inline lunge, shoulder mobility, and rotary stability among the seven items of FMS (p<0.05). Conclusions: To enhance the dynamic stability of adults with DS, it is necessary to improve ankle stability by strengthening the ankle dorsal and plantar flexors.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.4
• /
• pp.363-371
• /
• 2020

This study was designed to evaluate the improvement in exercise endurance by Hovenia dulcis fruit hot water extract (HDWE) for the potential application as a functional food material. The effect was based on the evaluation of the forced-swimming capacity and changes in biochemical parameters in mice. Six-week-old mice were classified into four groups based on a randomized block design: the negative control group, the HDWE 50 mg/kg body weight group, the HDWE 200 mg/kg body weight group, and the 1-octacosanol 50 mg/kg body weight group (n=8 mice per group). The swimming exercise time in the HDWE-50 group was increased at 545±43 sec compared to the control group at 263±28 sec. The HDWE-200 fatigue indicators, lactate acid and ammonia content, decreased to 4.99±0.33 mg/mL and 0.63±0.05 mg/mL, respectively. In addition, the content of glycogen in the liver and muscle tended to increase in the group administered HDWE but was not significant. Likewise, the LDH and glucose contents were increased compared to the control group. The muscle damage indicators ALT (52.7±2.6 U/L) and AST (42.5±5.2 U/L) tended to decrease compared to the control group (76.4±10.2 U/L).

• Korean Parent-Child Health Journal
• /
• v.7 no.2
• /
• pp.168-181
• /
• 2004

Purpose: The purpose of this study was to identified patterns of studies and to analyze the nursing research related to the massage intervention in Korea and to improve direction of nursing research in massage intervention in Korea. Methods: The research studies related to the massage were selected from the Korean Nurses Academic Society Journal and dissertation which were conducted experimental research design the last 7 years in Korea. The total numbers of the studies were 58. Result: The study subjects were post operational state in 34.5%, healthy adult in 17.2% studies. The others dealt with infant, cancer, dementia, hypertension, preterm neonates, elderly. Types of massage were whole body in 31.1%, foot in 22.6%, hand in 17.2%, back in 13.8% studies. And Meridian massage in 17.2%. Length of massage was below 5 minutes in 17.2%, 6~10 minutes in 29.4% and 11~20 minutes in 32.8% studies. Frequency of massage was only 1 time in 25.9%, 2~5 times in 31.1% studies. Massage produced psychological and physiological effects. Positive psychologic effects were anxiety relief, pain relief, mood enhancement and fatigue relief. Positive physiologic effects on body systems were blood pressure, heart rate, edema, skin temperature, immune system, blood glucose, excretion, PMS syndrome and growth and development. Conclusion: As a result, effects of massage were almost positive. Therefore massage is useful alternative nursing intervention. But more attention research is needed to identify the objectivity instrument to measure and repeat research.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.227-237
• /
• 1999

As the interface bonding phenomenon between the matrix and the reinforcements has a large effect on the mechanical properties of MMCs, a sugestion of the strength analysis technique considering the residual stress and the interface bonding phenomenon is very important for the design of pans and the estimation of fatigue behavior. In this paper the three dimensional finite element anaysis is performed during the elasto-plastic deformation of the particulate reinforced metal matrix composites. It was analyzed with the volume fractions in view of microscale. Bonding strength. interface separation and matrix void growth between the matrix and the reinforcements will be predicted on deformation under tensile loading. An interface seperation is estimated by the fracture criterion which is a critical value of generalized plastic work per unit volume. The shape of the reinforcement is assumed to be a perfect sphere. And the type of the reinforcement distribution is assumed as FCC array. The thermal residual stress in MMCs is induced by the heat treatment. It is included at the simulation as an initial residual stress. The element birth and death method of the ANSYS program is used for the estimation of the interface bonding strength, void generation and propagation. It is assumed that the fracture in the matrix region begin to occur under the external loading when the plastic work per unit volume is equal to the critical value. The fracture strain will be defined. The experimental data of the extruded $SiC_p$>/606l Al composites are compared with the theoretical results.