• 한국재료학회지
• /
• 제4권2호
• /
• pp.219-226
• /
• 1994

반복회수에 대한 하중-변형률 선도로부터 구산 잔류변형률의 비교 결과에서 피로하중하의 GFRP관의 강성은 GFRP관의 유리섬유의 적층수가 클수록 크게 나타났으며, 이러한 현상은 피로파괴 직전까지 나타났다. 아울러 본 피로실험 결과를 회귀분석하여 구한 S-N선도에 의하면 정적극한강도 백분율에 대한 피로강도는 GFRP관의 유리섬유 적층수가 증가할수록 증가하였으며, 유리섬유의 적층수가 15, 25, 35층인 GFRP관의 반복회수 200만회에 대한 피로강도는 정적극한강도는 각각 약 75.2%, 79.5%, 84.2%로 나타났다.

• 대한기계학회논문집A
• /
• 제37권7호
• /
• pp.945-951
• /
• 2013

본 논문은 도시형 자기부상열차에 사용되는 대차프레임의 피로강도를 평가하는 방법을 제안하였다. 가상의 하중 시나리오로부터 구조해석을 수행하여 응력해석결과를 Goodman 선도상의 피로한계선도와 비교하였으며, UIC 규격에 적용되는 3단계의 피로조건을 적용하여 피로누적손상도(cumulative fatigue damge, D)를 계산하였다. 피로해석결과, Goodman 선도상에서 대차 프레임 사용소재인 A6005 알루미늄 합금 Butt 용접부의 피로한계선도를 초과하지 않았다. 가장 높은 피로손상도는 캐스팅 블록 및 전자석 폴 연결부로서 $1{\times}10^7$ cycles 기준으로 D=0.808로 계산되어 파손기준을 초과하지 않음을 확인하였다. 피로해석과 동일 조건으로 실시된 수직, 좌우, 전후 방향의 피로시험에서 대차 프레임의 어느 위치에서도 균열이 발생되지 않았으며, 이는 피로안전측으로 계산된 해석결과와 부합되는 결과이다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.113-118
• /
• 1998

The relation of cycle loading to deflections on the mid-span, the crack propagation and the modes of failure according to cycle number, fatigue life and S-N curve were observed through the fatigue test. Based on the fatigue test results, high-strength reinforced concrete beams failed to 57 ~ 66 percent of the static ultimate strength. Fatigue strength about two million cycles from S-N curves was certified by 60 percent of static ultimate strength.

• 종양간호연구
• /
• 제1권1호
• /
• pp.54-64
• /
• 2001

This study was conducted to explore the trajectory of fatigue and related factors on people with lung cancer during chemotherapy. A total of 23 patients with lung cancer participated in the beginning stage of the study. However, 11 dropped out because of death or discontinuity of the studys regimens. The data using the Pipers Fatigue Scale, were collected twice the first day of each treatment cycle and the last day of the completion of 6 cycles. Also, the scores of fatigue using the Visual Analogue Scale (VAS) were measured on the same day of each week during chemotherapy to explain the trajectory of fatigue. The data obtained were analyzed using the Wilcoxon signed ranks tests and Kendalls tau b correlation coefficient. The score of fatigue increased in the first two weeks after the administration of chemotherapy, while decreasing after the second week. During the 1st, 5th, and 6th cycles, the scores of fatigue were greater than 5.5 out of 10. Overall, except for the 6th cycle, the score of fatigue was the highest in the first week. This could be accounted for there only being a small number of patients included in the 6th cycle. In conclusion, fatigue was severe at the end of the first week of chemotherapy, and then increased to reach a plateau in the fifth and sixth stages. The results of this study will help oncology nurses to understand the process of fatigue during chemotherapy. It will be useful to create various intervention programs to decrease fatigue in people with cancer especially in the first week of the chemotherapy.

• 한국압력기기공학회 논문집
• /
• 제15권2호
• /
• pp.19-30
• /
• 2019

In this study, to evaluate conservatism of various fatigue life evaluation procedures, fatigue tests were conducted using compact tension (CT) specimens with a round notch, made of A516 Gr.70 carbon steel and A240 TP304 stainless steel, under load-controlled cyclic condition. Experimental fatigue failure cycles were measured and compared with predicted fatigue lives using two different life evaluation methods; (1) Design-By-Analysis (DBA) procedure given in ASME B&PV Code, Sec. III, Div. 1, Subsec. NB-3200 and (2) structural stress-based approach provided in ASME B&PV Code, Sec. VIII, Div. 2, Part 5. To predict fatigue failure cycles, three-dimensional elastic finite element analysis was conducted. Fatigue lives were predicted by both design fatigue curve given in ASME B&PV Code, Sec. III, Div. 1, Appendices and best-fit fatigue curve suggested in NUREG/CR-6815 for the DBA procedure. Finally, fatigue lives evaluated by various methods were compared with test results, and then conservatism between each evaluation procedure was discussed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.67-72
• /
• 1999

Scanning probe Microscope(SPM) such as Scanning Tunneling Microscope(STM) and Atomic Force Microscope(AFM) was shown to be the powerful tool for nano-scale characterization of material surfaces Using this technique, surface morphology of the cyclically deformed Cu or Cu-Al single crystal was observed. The surface became proportionately rough as the number of cycles increased, but after some number of cycles no further change was observed. Slip steps with the heights of 100 to 200 nm and the widths of 1000 to 2000 nm were prevailing at the stage. The slipped distance of one slip system at the surface was not uniform. and formation of the extrusions or intrusions was assumed to occur such place. By comparing the morphological change caused by crystallographic orientation, strain amplitude, number of cycles or stacking fault energy, some interesting results which help to clarify the basic mechanism of fatigue damage were obtained. Furthermore, applicability of the scanning tunneling microscopy to fatigue damage is discussed.

• 대한간호학회지
• /
• 제39권3호
• /
• pp.433-445
• /
• 2009

Purpose: The purpose of this study was to assess changes in pain, fatigue, anorexia, anxiety and quality of life(QOL) in patients with cancer who were on chemotherapy. Methods: Symptoms and QOL were examined both before chemotherapy and after 2 cycles of chemotherapy. The participants were 76 cancer patients receiving chemotherapy in one of 7 hospitals. Results: The patients experienced a mean of 2.22-2.23 symptoms out of 4 symptoms. Patients who were female, or suffered from breast or colorectal cancer experienced more symptoms. Fatigue at present, and most severe fatigue and anorexia in the previous 3 weeks increased significantly. Anxiety and QOL decreased significantly after 2 cycles of chemotherapy. Number of symptoms, anorexia at present, most severe anorexia in past 3 weeks, and anxiety had negative correlations. QOL before chemotherapy showed a positive correlation with QOL after 2 cycles of chemotherapy. In a regression analysis, anxiety, QOL at baseline, income, and the most severe pain in the past 3 weeks were significant predictors of QOL. Conclusion: Physical and psychological factors were significant predictors of both QOL and each subscale, and these factors correlated with each other. These results demonstrate the needs for early assessment and intervention from the start of chemotherapy to decrease symptoms and improve QOL.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.915-922
• /
• 2004

A stent is small tube-like structure expanded into stenotic arteries to restore blood flow. The stent expansion behaviors define the effectiveness of the surgical operation. In this paper, finite-element method was employed to analyze expansion behaviors and fatigue life of a typical diamond-shaped balloon-expandable stent. Beyond safety considerations, this type of analysis provides mechanical properties that are often difficult to obtain by experiments. Mechanical properties of the stent expansion pressure, radial recoil, longitudinal recoil and foreshortening were simulated using commercial FEM code, ANSYS and fatigue life were estimated using NISAII ENDURE. The FEM results showed that the pressures necessary to expand the stent up to a diameter of 3mm, 4mm and 5mm were 0.75MPa, 0.82MPa and 0.97MPa. The fatigue lifes according to expansion diameter were 114${\times}$10$^{7}$cycles, 714${\times}$$^{6}$cycles and 163${\times}$10$^{6}$cycles. As a result, a finite element model used in this study can simulate expansion behaviors of stents and should be useful to design new stents or analyze actual stents.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.161-168
• /
• 2010

A series of fatigue tests have been performed on the non-load carrying fillet welded joints in order to quantitatively assess the fatigue characteristics due to the grindings and TIG(Tungsten Inert Gas) welding treatments. From the results of fatigue tests, it has been shown that the fatigue strengths at $2{\times}106$ load cycles were improved in the case of the grinding sand TIG welding treatments, and we could know that it is satisfying fatigue strength prescribed in fatigue design standard in general. Besides, from the results of fracture mechanics approaches, the geometric shape correction factors were the most dominant factors in the initial fatigue crack growth, but as the fatigue crack develops, the finite plate correction factor were became the most dominant factor, and the fatigue life on non-load carrying fillet welded joints could be relatively exactly estimated by using the relations between fatigue crack growth rate and stress intensity factor obtained from finite element analysis and existing proposed formulae.

• Smart Structures and Systems
• /
• 제6권9호
• /
• pp.1041-1056
• /
• 2010

This paper investigates the possibility of a strategy for an automatic full recover of a structural component undergoing loading-unloading (fatigue) cycles: full recover means here that no replacement is required at the end of the mission. The goal is to obtain a material capable of self healing earlier before the damage becomes irreversible. Attention is focused on metallic materials, and in particular on shape memory alloys, for which the recovering policy just relies on thermal treatments. The results of several fatigue tests are first reported to acquire a deep understanding of the physical process. Then, for cycles of constant amplitude, the self-healing objective is achieved by mounting, on the structural component of interest, a suitable microcontroller. Its input, from suitable sensors, covers the current stress and strain in the alloy. The microcontroller elaborates from the input the value of a decisional parameter and activates the thermal process when a threshold is overcome.