• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.7-12
• /
• 2010

In this paper, chip-on-glass(COG) interconnection with anisotropic conductive film(ACF) using lateral thermosonic bonding technology is considered. In general, thermo-compression bonding which is used in practice for flip-chip bonding suffers from the low productivity due to the long bonding time. It will be shown that the bonding time can be improved by using lateral thermosonic bonding in which lateral ultrasonic vibration together with thermo-compression is utilized. By measuring the internal temperature of ACF, the fast curing of ACF thanks to lateral ultrasonic vibration will be verified. Moreover, to prove the reliability of the lateral thermosonic bonding, observation of pressured mark by conductive particles, shear test, and water absorption test will be conducted.

• Elastomers and Composites
• /
• v.13 no.4
• /
• pp.277-281
• /
• 1978

1. A good retarder reacts fast with MBT and. forms a non-scorchy accelerator. 2. The decrease in cure rate$(k_1)$ is attributable to the slow cure rate of 2-cyclohexyldithiobenzothiazole(CDB). 3. Cyclohexyl polysulfides(CPS) and cyclohexylthioamine are believed to be also involved in the cure retardation. 4. The new retarder can stop crosslinking by intercepting the crosslink precursors. 5. Formation of cyclohexyl polysulfides and their lack of curing property may be responsible for the low state of cure when the new retarde is used. These results are schematically summarized in Figure 7.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.81-86
• /
• 2017

The high-pressure resin transfer molding (HP-RTM) process has a very effective for the mass production of carbon fiber reinforced plastic (CFRP) for light weight in the automotive industry. In developing robust equipment, new process and fast cure matrix systems reduces significantly the cycle time less than 5 minutes in recent years. This paper describes the cavity pressure, temperature and molding characteristics of the HP-RTM process. The HP-RTM mold was equipped with two cavity pressure sensors and three temperature sensors. The cavity pressure characteristics of the HP-RTM injection, pressurization, and curing processes were studied. This experiment was conducted with selected process parameters such as mold cap size, maximum press force, and injection volume. Consequently, this monitoring method provides correlations between the selected process parameters and final forming characteristics in this work.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.5
• /
• pp.33-36
• /
• 2019

Arginine is one of the basic aminoacid found to be associated with histones and also one of the essential aminoacids now. Arginine is provided by diet, and also found to be synthesised in the body through intestinal-renal axis. Justification---BMI---Associated Risks-How to gain body weight---Healthy. Foods to Gain Weight Fast---High-Protein Vegetables and Fruits(with Image)-Recipes---Physical exercises-List of fruits and vegetables grown in Bangladesh with local names, English names and Botanical names-taxonomic family names. Arginine as drug was first approved by FDA and has recognised as a excellent dietary supplement for curing diseases like preeclampsia during gestation, diabetes and insulin resistance in obese patients. Preeclampsia is characterised by high blood pressure and proteinuria in gestational period of after 20 weeks. Severe preeclampsia is characterised by headaches, blurred vision, and inability to have high photovision, nausea and vomiting. L-Arginine along with Vit C and E are given as medical food to the patients and decrease in condition symptoms is the project now under phase II clinical trial. However the role of arginine in ameolirating preeclampsia symptoms is uncertain except with that of hypertension. Arginine is used to treat pain in sickle cell anaemia, lung damage, reperfusion injury, Trauma and shock but should be excluded during sepsis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.232-233
• /
• 2006

In recent years the interest in organic/inorganic hybrid materials has increased at a fast rate. Nano organic-inorganic hybrid composites have shown advantages for preparing hard coating layers. Especially, nano hybrid composite has low environmental pollution. It has high transparency, hardness, toughness, thermal dissociation temperature, hydrophobicity by using nano sized inorganic material. There are many ways in which these materials may be synthesized, a typical one being the use of silica and silanes using the sol-gel process. The structure of sol-gel silica evolves as a result of these successive hydrolysis and condensation reactions and the subsequent drying and curing. The sol-gel reactions are catalyzed by acids and produce silica sol solutions. The silica sol grows until they reach a size where a gel transition occurs and a solid-like gel is formed. Colloidal silica(CS)/silane sol solutions were synthesized in variation with parameters such as different acidity and reaction time. In order to understand their physical and chemical properties, sol-gel coating films were fabricated on glass. From all sol-gel solutions, seasoning effect of sol-gel coating layer on glass was observed.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.3
• /
• pp.171-179
• /
• 2003

In order to investigate the effects of pickle carrier on physico-chemical characteristics of seasoning chicken products, chicken were cured in seasoning containing 100 ppm germanium water, green tea, water soluble mineral and mixtures(100 ppm germanium water+green tea+water soluble mineral) after addition of 0.1% concentration to the weight of chicken. The determination of pH, salt and sugar contents were carried out, according to curing time. The salt content showed 1.11 %, 1.21 % in cured at 24 hours in control of breast and leg, irrespective of chicken parts, in which showed 19.94 brix, 18.89 brix in sugar content, respectively. These results mean that breast and leg meat added with natural extracts and functional water showed higher sugar content than that of control, in which revealed shortening of curing time by increasing penetrating velocity of salt and sugar content. Thus, salt and sugar content tended to be increased as the curing time of pickle carrier were extended in seasoning chicken after dipping in pickle containing water soluble mineral ions for 6 hours. The seasoning chicken treated with natural extracts and functional water showed a lower than that of control in hardness, irrespective of chicken parts. Overall, the seasoning chicken treated with natural extracts and functional water showed a low TBARS value and Log CFU/g, in which revealed antioxidative and antimicrobial activity. The sensory evaluations of seasoning chicken added with natural extracts and functional water containing water-soluble mineral ions were not significantly different(P<0.05). The glutamic acid among free amino acid contents showed a high in seasoning chicken treated with green tea, compared to control. This amino acid played a important role in taste of seasoning meat. The doneness appearance in seasoning chicken added with natural extracts and functional water containing water-soluble mineral ions tended to not be different, compared to those of control. These results revealed that seasoning chicken added with natural extracts and functional water containing water-soluble mineral ions would be attractive in fast food market on the basis of improvement of tenderness, shortening of curing time and uniformity of roasting appearance in seasoning chicken.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.17-25
• /
• 2014

In the present study, it were performed an unconfined compression test and a field applicability test according to a mixed ratio of SS, soil type and curing period to analyze strength and deformation characteristic in order to evaluate engineering characteristics of soil mixed pavements using the eco-friendly soil stabilizer (SS). The test results revealed that SS mixed soil shows fast strength development at the initial curing time while 28-day strength amounted for 97% of the final strength. Furthermore, coarse-grained dredged sand (DS) and weathered granitic soil (WGS) have a larger ratio of deformation coefficient with respect to unconfined compressive strength than fine-grained dredged clay (DC) and organic soil (OS). Moreover, a comparison test between natural and forced drying conditions was conducted and test result showed 54% to 67% of strength degradation while having 55% to 63% of strength degradation in the freezing and thawing test result. Finally, a repeated loading test result showed that DS experiences up to 35% of strength reduction compared to initial strength under 10,000 times loading in maximum. Thus, it was validated that an appropriate amount of fine-grained sand is necessary to secure resistance capability to repeated loading.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.963-969
• /
• 1996

Cure characteristics of DGEBA(diglycidyl ether of bisphenol A)/dicy(dicyandiamide) system containing diuron(3-(3,4-dichloro phenyl) -1,1-dimethylurea) as an accelerator was investigated. The system has shelf life of six months because dicy is insoluble in liquid/solid resins at room temperature. It is generally known that dicy is an adequate curing agent for one component adhesive due to its highly latent property. With increasing the amount of added dicy, reaction heat of DGEBA/dicy system increased and degree of conversion was not varied. For DGEBA/dicy/diuron system, cure temperature decreased about $40^{\circ}C$ and cure reaction became fast by the addition of diuron which activates dicy. $T_g$ of the mixed resin decreased with the amount of accelerator. which was interpreated with molecular structure forming loose chain. Cure kinetics of DGEBA/dicy and DGEBA/dicy/diuron system were explained using Kamal's autocatalytic reaction model. The effect of acceleration was confirmed with that reaction model.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.120-128
• /
• 2003

The effects of catalyst, accelerator and blend composition on the cure behavior of unsaturated polyester resin (UPE), vinyl ester resin (VE) and their blends were studied using differential scanning calorimetry(DSC). The DSC thermograms strongly depend on each variable. The result shows that the small exothermic peak at 115$^{\circ}C$ is due mainly to the UPE component in the UPE/VE blends and the large one at 134~138 $^{\circ}C$ is due mainly to the VE component. The results also indicate that the change of the DSC thermogram measured after each blend was exposed to high temperature 18$0^{\circ}C$ and the fast curing conditions of a few tens seconds provide useful information on understanding the thermal processing of a blend at high speed. The measurements of resin flow time represent that there are three distinct stages of cure in the UPE/VE blends: induction, transition and macro-gelation stages, as similarly reported for UPE by others earlier. The thermal stability and flexural properties of the cured UPE are significantly improved by blending it with the VE, depending on the composition.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.757-768
• /
• 2014

Purpose: In this paper we present a case study of developing fast curing adhesives for insulation material of LNG carriers using an extreme vertices design with four mixture components. Three material properties are considered - shear strength, viscosity, and tensile strength. In the optimization experiment, we used hardness instead of tensile strength due to shortage of specimens. Methods: We employ four-factor extreme vertices design with 19 runs and desirability function approach for simultaneously optimizing three responses. After selecting optimal condition of the mixture components, we do confirmation experiments to verify the reproducibility of the optimal condition under manufacturing circumstance. Results: Simultaneous optimal condition for the three responses, that is, shear strength, viscosity, and harness is obtained. At the optimal condition, confirmation experiments are executed in manufacturing circumstance. The variation for the shear strength is not satisfactory, which is due to the variation of the humidity. Conclusion: At the optimal condition three material properties are satisfactory. To reduce the variability for the shear strength, robust design is needed.