• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1689-1699
• /
• 2016

The growth conditions of planted trees, invasion of nuisance herbaceous species, competition between species, and effects of erosion control were monitored over five years in a riparian greenspace in Gapyeong County that was established through multilayered and grouped ecological planting. Of 156 trees planted in the upper and middle layers, 5.8% died. This tree death was attributed to poor drainage or aeration in the rooting zone from the clay-added root ball and too deep planting as well as a small-sized root ball and scanty fine roots. Of all the trees, 21.6% grew poorly due to transplant stress in the first year after planting, but they started to grow vigorously in the third year. This good growth was largely associated with soil improvement before planting, selection of appropriate tree species based on growth ground, and control of dryness and invasive climbing plants through surface mulching and multilayered/grouped planting. Mixed planting of fast-growing species as temporary trees was desirable for accelerating planting effect and increasing planting density. Thinning of fast-growing trees was required in the fifth year after planting to avoid considerable competition with target species. To reduce the invasion of herbaceous and climbing plants that oppress normal growth of planted trees, higher density planting of trees (crown opening of about 15%), woodchip mulching to a 10-cm depth, and edge planting 2 m wide were more effective than lower density planting (crown opening of 70%), no surface mulching, and no edge planting, respectively. This reduction effect was especially great during the first three years after planting. Nuisance herbaceous plants rarely invaded higher density planting with woodchip mulching over the five years. Higher density planting or woodchip mulching also showed much greater erosion control through rainfall interception and buffering than lower density planting with no mulching did. Based on these results, desirable planting and management strategies are suggested to improve the functions of riparian greenspaces.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.2
• /
• pp.118-133
• /
• 2024

The sapwood portion of fast-growing teak is mostly ignored due to its inferior quality. One of the possibilities for utilizing sapwood waste is to convert it into activated carbon that has good adsorption capabilities. The raw materials used in this research were sapwood of 14-year-old fast-growing teak sapwood (FTS) waste, which was taken from three trees from community forests in Wonosari, Gunungkidul, Yogyakarta Special Region. FTS waste was taken from the bottom of the tree up to a height of 1.3 m. The activation process is conducted with an activation temperature of 750℃, 850℃, and 950℃. The heating duration consists of three variations: 30 min, 60 min, and 90 min. The quality evaluation parameters of activated carbon include yield, moisture content, volatile matter content, ash content, fixed carbon content, adsorption capacity of benzene, adsorption capacity of methylene blue, and adsorption capacity of iodine. The results showed that the activated carbon produced had the following quality parameters: yield of 75.61%; moisture content of 1.27%; volatile matter content of 9.98%; ash content of 5.43%; fixed carbon content of 84.58%; benzene absorption capacity of 8.58%; methylene blue absorption capacity of 87.73 mg/g; and iodine adsorption capacity of 948.19 mg/g. It can be concluded that activated carbon from FTS waste has good iodine adsorption, which fulfilled the SNI 06-3730-1995 quality standard. Due to the iodine adsorption ability of FTS waste activated carbon, the conversion of FTS waste to activated carbon is categorized as a potential method to increase the value of this material.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.618-630
• /
• 2020

Muna teakwood, especially from old stands, has been popular as raw material for timber industries in Indonesia for the past ten decades. Due to the scarcity of this wood, superior-grown seedlings of Muna teakwood have been developed and widely planted. Since there is no information on its characteristics, therefore, the aim of this research was to investigate wood characteristics of the 8-year-old superior-grown teak from Muna Island to ensure their proper utilization as raw material for wooden furniture. Wood discs and boards from basal area of three different trees were used as the samples. Macroscopic and microscopic anatomical characteristics were observed following the IAWA's list, while their physical-mechanical properties were measured following British Standard 373-57. Results showed that anatomical characteristics of this wood sample are similar to regular teakwood, but its heartwood portion is higher. Differences among trees are found in regards to wood texture, growth ring width, as well as early and latewood portion. The green moisture content was lower than that of fast-growing teak of a similar age. The wood is more stable than the old teakwood, but its specific gravity is lower. In general, mechanical properties of this wood were higher than those of the regular fast-growing teakwood, but lower than the old one. Based on its specific gravity, this superior Muna teakwood was categorized as a Strength Class of III. The wood is suitable enough for wooden furniture manufacturing.

• The Korean Journal of Ecology
• /
• v.26 no.6
• /
• pp.341-347
• /
• 2003

Historical Documents on Proper Tree Selection System of Korea were collected in Japan and introduced in this review. Products of some pine species and fruit were used for laying a tribute to Kings in the Chosun dynasty. In this review, some case studies and implementation of proper tree selection system during the period of Japanese rule, the atlas of climatically favourable regions for the species of trees and bamboos in Korean peninsular, and the test results on regional afforestation, tree selection and proper tree selection of fast growing trees were introduced. Of these documents, especially, the atlas of climatically favourable regions of trees and bamboos growing in Korean peninsular is considered as a valuable document. It tis expected that these historical documents on proper tree selection system might be use as references for the researches on indigenous forest, forest resources development, afforestation of fire damaged areas, and the restoration project of North Korea by the time of reunification of Korea.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.411-419
• /
• 2008

Xylia xylocarpa is fast-growing trees that are currently planted on trial basis in Sabah, Malaysia. The wood quality of trees grown in Sabah may differ from those grown in other places due to the environmental factors. Five 9-year-old trees of each species were extracted from their respective plots at Luasong, Tawau. Wood specimens were prepared from three height levels; bottom, middle and top, at the inner and outer radial positions. The within-tree and between-tree variations of physical properties of these species were analyzed. The basic density, oven-dry density and green moisture content(MC) are 0.72g/$cm^3$, 0.78g/$cm^3$ and 49.8% respectively. The shrinkage from green to oven-dry conditions for the radial and tangential directions were 3.35% and 5.76%, respectively. The trends of within-tree variations for most properties were more consistent in radial rather than vertical direction. This suggests diameter growth to be a more important factor contributing to the variations compared to height. Samples from the outer part of the stem were found to have higher density, shrinkage and mechanical strengths. The between-trees variations of some wood properties were found to be significantly different, probably due to genetic and micro-environmental factors. Significant correlation was recorded among the physical properties of the species. The true potential of X. xylocarpa for end-uses would be enhanced by further research such as the study on properties of wood from different sites and other properties like durability, seasoning, processing and machining characteristics. The characteristics of X. xylocarpa are comparable to a number of local popular hardwood species, indicating its suitability for heavy construction uses.

• Korean Journal of Environment and Ecology
• /
• v.24 no.5
• /
• pp.591-600
• /
• 2010

We estimated and compared C storages and annual $CO_2$ uptakes by 9 dominant tree species planted along the streets. DBH and age by tree species were measured in the sites selected considering the planting status and distributions of tree species, and biomass, C storage, growth rate, and annual $CO_2$ uptake were estimated for each species. As a result, L. tulipifera, M. glyptostroboides, P. occidentalis were classified into fast-growing group, P. serrulata, G. biloba, Z. serrata, S. japonica, A. palmatum showed intermediate growth rates, and P. densiflora was slow-growing. Average C storage per tree was 205kgC/tree and ranged from 518kgC/tree(L. tulipifera) to 41kgC/tree(P. densiflora). Average annual $CO_2$ uptake by urban street trees over their lifespan ranged from $7.6kgCO_2$/tree/y to $99.1kgCO_2$/tree/y and L. tulipifera was the greatest, followed by glyptostroboides and P. occidentalis, and P. densiflora was the lowest. Total annual $CO_2$ uptake by all street trees in Gyeonggi-do, estimated based on the annual $CO_2$ uptake by each species, was as small as approximately 0.67% of that by forest in Gyeonggi-do. However, urban trees are still important because forest area continues to decrease and urbanization occurs annually in Gyeonggi-do, and should be managed considering their multi-functional aspects, including mitigation of heat island effect and building energy saving(indirect $CO_2$ uptake).

• Korean Journal of Breeding Science
• /
• v.43 no.4
• /
• pp.330-336
• /
• 2011

A comparative study was conducted on genetic correlation between 12 open-pollinated families (32-year-old) and their one-year-old seedlings for early selection on the fast-growing trait in Pinus densiflora S. et Z.. Those twelve families were divided into three groups such as superior, intermediate, and inferior, on the base of the growth indexes of 32-year-old P. densiflora. The growth performance of the 32-year-old P. densiflora showed significant correlation with the growth traits of their one-year-old seedlings. Dry weights of the seedlings had significant correlation (P < 0.01) with the growth index of the adult plants and its $R^2$ value was 0.597, suggesting that 59.7% of the families could be selected by using dry weights of one-year-old seedlings. Furthermore, the growth rates of seedling heights for superior, intermediate, and inferior groups were 4.568, 3.773, and 3.535, respectively, resulting that seedlings of the superior group grew approximately 1.3-fold faster than those of the inferior group. Therefore, we concluded that two growth traits of one-year-old seedlings dry weight and growth rate were suppose to the early selection factors for the fast-growing trait for P. densiflora.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.36-42
• /
• 2003

To identify the rapacity of waste leachate absorption in Populus euramericana and Betula platyphylla var, japonica, four different treatments were applied to seedlings: leachate solution (100% leachate), 50% dilution (50% leachate: 50% water, v/v) and 25% dilution, (25% leachate: 75% water, v/v) were applied to these two species. After the experiment, concentrations of heavy metals in tree parts were analyzed by an Inductively Coupled Plasma emission spectrometer (ICP). treatment with waste leachate significantly stimulated both Populus euramericana and Betula platyphylla var. japonica biomass production relative to the water control. In addition, these species showed good absorption capacity of As, Co, Hg and Ni elements. The results of this study suggested that these two species can absorb the toxic materials through their roots and transport them to stems or leaves.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.3
• /
• pp.222-237
• /
• 2023

Eucalyptus pellita is one of the fast-growing tree species and has become predominant in Indonesian forest plantations. Meanwhile, tree breeding programs with clone development are the best way to provide greater genetic advantages. A better understanding of genetic control on growth and basic density in E. pellita is important for increasing wood productivity and quality. In this study, growth characteristics (tree height, diameter, and volume), basic density and its genetic parameters (heritability, genetic gain and genetic correlation) were determined. The number of clones tested in both trials was 50, divided into 5 blocks, and 5 trees/plot. The results showed that there were significant differences in growth and basic density among clones. There was an interaction between genetics and the environment further indicating the existence of unstable clones. The high heritability was found in tree height (0.82-0.86), diameter (0.82-0.90), and basic density (0.91-0.93). This implies that E. pellita has good opportunities for genetic improvement to increase wood productivity and quality. In addition, the results of genetic correlations among growth characteristics (height, diameter, and volume) and basic density showed positive moderate to highly significant value. It is suggested that these characters may be used to the advantage of the breeder for bringing improvement in these traits simultaneously. Therefore, this study provides important information of the genetic improvement of wood quality in E. pellita in Indonesia.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.