Component-based software development (CBD) technology has been widely accepted as a new effective paradigm for building software systems with reusable components, consequently reducing efforts and shortening time-to-market. Hence, components should provide standard or common functionalities in a domain, yielding a higher level of reusability. Especially, micro-level variability within the commonality should also be modeled so that a product member-specific business logic or requirement can be supported through component tailoring or customization The importance of commonality and variability (C&V) analysis has been emphasized in several CBD methods, but they lack of well-defined systematic process, detailed instructions, and standard artifact templates. As the result, the development of components has been carried out in ad-hoc fashion, depending on developer's experience. In this paper, we propose a systematic process and work instructions to design components. The process consists of phases and their activities and each activity is specified with detailed instructions and artifact templates in order to facilitate effective development of components. To verify a feasibility of the propose method, a case study in a banking domain and comparison and assessment between the proposed method and other methods are additionally provided. With proposed processes and instructions, reusability and efficiency of developing components can be better supported.
Journal of the Korean Society of Clothing and Textiles
/
v.41
no.1
/
pp.84-97
/
2017
Water vapor and thermal transmission properties of high emotional garments are important to evaluate wear comfort; in addition, the measuring methods of these properties are also critical for breathable and warm suit fabrics. In this study, the water vapor and thermal properties of composite yarn fabrics made of CoolMax, Tencel, and Bamboo fibers with filaments were measured and compared according to the measuring method. Water Vapor Transmittance (WVT) of the fabric woven by the sheath/core composite yarn in the warp direction was the highest due to the small staple fiber volume in the sheath/core yarn structure and high air voids in the sheath/core yarn fabrics. This property was also the highest in fabrics woven by bamboo staple yarns in the weft direction, and was the lowest on hi-multi filament fabrics. However, water vapor resistance ($R_{ef}$) of these fabrics by KSK ISO 11092 showed the opposite results to the water vapor transmittance method ($CaCl_2$ method); in addition, its correlation coefficient was low. The correlation coefficient between $R_{ef}$ and the drying rate was 0.719; therefore, the measurement mechanism of $R_{ef}$ is analogous to the drying property measurement. The thermal conductivity of the fabrics woven with compact staple yarn showed a high value; however, the hi-multi filament fabric showed low thermal conductivity. Therefore, fiber characteristics affect thermal properties more than yarn structure. The correlation between thermal property and moisture transport was also low. This study showed that: water vapor transmittance was active at the loose yarn structure, dry heat transport was vigorous at the compact yarn structure, and heat transport was affected more by fiber characteristics than yarn structure. In conclusion, sheath/core composite yarns were relevant to the high absorptive cool suit along with siro-fil and CoolMax/Bamboo staple yarns that were relevant to the heat diffusive cool suit.
This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.
Journal of the Korea Academia-Industrial cooperation Society
/
v.18
no.11
/
pp.151-157
/
2017
Recently, the retail industry has created efficient store operations, and has differentiated customer service through the future store. The intelligence of these stores is being applied by using technologies such as the Internet of Things (IoT), and the business process is being improved through this. The process also focuses on efficient store operations and service developments to provide customers with shopping convenience. The change in trends in the industry means that domestic distribution has already reached maturity. Even in countries where retail industries are mature, such as the U.S. and Europe, recent trends are moving toward maximizing operational efficiency and customer service. The reason is that many retailers have already reached saturation and survived the competition. This paper is a study of a drive-through service for automation and efficiency in receiving service after ordering by a customer of the distribution store. When ordering a product being purchased by a customer, the product picking process is done in a timely fashion through a picking scheduling agent. When the customer enters the store parking lot, a service supports the entry of information and finding a parking place so the customer can quickly pick up the goods. The proposed service can be applied to a retail store drive-through system, the distribution store's delivery system, the digital picking system, and indoor/outdoor large parking management systems, and it is possible to provide one-dimensional customer service through the application of IoT technology.
In order to present wireless Internet users with previously created HTML contents and applications, it is essential to research and develop the technology to efficiently convert HTML documents into documents and further provide a way to edit the WML documents. This paper describes the design and development of a WML converter and WML editor The WML converter can convert HTML pages in real time into WML documents that are suitable for the WAP environment. The WML editor enables creation and modification of WML documents in a WYSIWYG fashion. These tools enable the previous services based on HTML documents to be easily adapted to the wireless environment. The developed WML converter can be installed on a proxy server to support real time conversion of Web contents. It is superior to other converters in terms of the various image formats it supports and the improvements on the conversion of the link and frame tags. Users can continuously browse via links and also view frames. Automatic dividing of large WML documents into WML cards md user defined conversion rules are also supported. The WML editor is also integrated with the converter and provides an integrated WYSIWYG environment for creating, converting and publishing WML documents.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.15
no.5
/
pp.20-28
/
2016
A Ubiquitous City (U-city, Smart City) is one that ties information communications technologies (ICT) into many facets of city construction, thereby implicitly intending to function as a smart city that aims to be efficiently managed as well as provide an enhanced standard of living for its residents. Laws related to the construction of such ubiquitous cities point to integrated city management centers, intelligent facilities, and U-City infrastructure, among others, as central components of U-Cities, but do not provide a standard for these structures. Consequently, building of U-Cities by local governments are based on arbitrary judgments constrained the myriad of practical limitations that they face. Such ambiguity brings to light the need to find ways to improve the quality of these efforts. The first and second stages of this research examine the status of the components of a U-City -ubiquitous planning, technology, infrastructure, and services - and undertakes a comprehensive review thereof, with evaluation criteria formulated on the characteristics of stability, connectivity, goal-orientation, and development potential. In the research's third stage, a realistic and detailed evaluation index by which U-Cities can be renewed, demonstrated, and applied (???) is introduced in a step-by-step fashion, which will allow for local governments to properly assess the standard of their U-City in relation to the realities of the locality. Through the research result, it is expected that the index will become a part of the continued development and advancement of the "smart" character of an autonomous U-City at the local scale, and contribute to the overall revitalization of the U-City.
This study investigated heat generation characteristics of knitted and woven intelligent garments made of ZrC imbedded yarns through thermal manikin measurement. These emotional and intelligent thermal characteristics by thermal manikin measurement were analysed and compared with light/thermal radiation experimental results. Surface temperature of ZrC imbedded woven and knitted fabrics by light/thermal radiation measurement was $4^{\circ}C$ and $2^{\circ}C$ higher than that of regular PET control fabrics, respectively. Clo value as heat generation characteristics of ZrC imbedded woven and knitted garments with light exposure was 0.14 and 0.08 higher than that of regular PET control garments, respectively. These results were attributed to the far-infrared thermal radiation from ZrC imbedded in the core part of the intelligent bi-component filament, which was verified by far-infrared emissive power ranged between $6{\mu}m$ and $20{\mu}m$ through FT-IR experiment and by inclusion of Zr through EDS ingredient analysis. However, compressibility of ZrC imbedded woven fabric was lower than that of regular PET one, and bending rigidity was higher than that of regular one, which resulted in a little stiff tactile hand property of ZrC imbedded fabric. We found that ZrC imbedded intelligent woven and knitted fabrics were applicable to the intelligent garment as a heat generation textile material by thermal manikin measurement.
Lee, Heeran;Hong, Kyunghi;Kim, Yang Weon;Park, Se Jin
Science of Emotion and Sensibility
/
v.16
no.1
/
pp.1-10
/
2013
The purpose of this paper is to investigate the adequate clothing pressure of upper and lower body foundation garment and subjective assessment of those compressive foundation depending on various wearing conditions. Eighteen women in their 30s and 40s participated in the experiments for this study to evaluate the level of clothing pressure of girdle and waist nipper. Subjects were divided into two groups by the wearing habits of foundation, one is the group of wearing foundation garment 'tightly' and the other is 'loosely', It was found that the group wearing foundation garment 'loosely' was much more sensitive than the group of 'tightly' in everyday life. The adequate pressure of upper foundation, waist nipper was about $1.5{\pm}0.8$ kPa which is lower than that of the lower body foundation, girdle. And at the same time, the sensitivity of the pressure level was higher when subjects are wearing waist nipper compared with wearing girdle. Therefore, precise pattern making process is necessary to meet the adequate level of pressure of the upper body foundation such as waist nipper, specially for those who used to wear clothing loosely.
Software license agreements, to be useful in the mass market, could not be individually negotiated, and had to be standardized and concise. The software license agreement needs to be presented to the licensee-users in a fashion that would allow for mass distribution of software, also for it to enforceable, that would draw the users' attention to the terms and conditions under which the publisher allowed the use of the software. These needs have been accomplished, with or without fail, through so called the "shrink-wrap licenses" Shrink-wrap licenses purpose to transfer computer softwares to their users by defining the terms and conditions of use of the software without implicating the "first sale doctrine" of the Copyright Act. These shrink-wrap licenses have become essential to the software industry. However, in USA, the law applicable to these licenses has been unclear and unsettled. Courts have struggled to develop a coherent framework governing their enforceability. Meanwhile, the National Conference of Commissioners on Uniform State Laws ("NCCUSL") in USA promulgated the Uniform Computer Information Transaction Act ("UCITA") governing contracts for computer information transaction on July 29, 1999. One clear objective of UCITA was to settle the law governing the enforceability of shrink-wrap licenses. In these respects, this paper first introduces the various forms that shrink-wrap licenses take(at Part II. Section 1.), and explains the main advantages of them(at Part II. Section 2.) Here it shows how shrink-wrap licenses value themselves for both software publishers and users, including that shrink-wrap licenses are a valuable contracting tool because they provide vital information and rights to software users and because they permit the contracting flexibility that is essential for today's software products. Next, this paper describes the current legal framework applicable to shrink-wrap licenses in USA(at Part III). Here it shows that in USA the development of case law governing shrink-wrap licenses occurred in two distinct stages. At first stage, judicial hostility toward shrink-wrap licenses marked such that they were not enforced pursuant to Article 2 of the Uniform Commercial Code. At second stage, courts began to recognize the pervasiveness of shrink-wrap licenses, their indispensability to the rapidly expanding information technology industry, and the urgent need to enforce such licenses in order to maintain low prices for consumers of computer hardware or software, resulting in the recognition of shrink-wrap licenses. Finally, in view of the importance of UCITA, this paper examines how it will affect the enforceability of shrink-wrap licenses(at Part IV). The drafters of UCITA, as well as the scholars and practitioners who have criticized it, agree that it validates shrink-wrap licenses, provided certain procedural protections are afforded to purchasers. These procedural protections include the licensee end-user must (i) manifest his assent to the shrink-wrap license, (ii) have an opportunity to review the shrink-wrap license, (iii) have a right to return the product without costs.
Huh Jeong Eun;Lee Hyo Jung;Song Gyu Yong;Cha Bae Cheon;Kim Han Sung;Yoo Dong Youl;Ryu Shi Yong;Kim Sung Hoon
Journal of Physiology & Pathology in Korean Medicine
/
v.16
no.3
/
pp.452-457
/
2002
Galla Rhois is a gallnut of Rhus javanica Linne used for treatment of diarrhea, hemorrhage, cough, leukorrhea and toxic tumor etc in oriental medicine. For the evaluation of antitumor effect of Galla Rhois, activity based fractionation was done. We isolated an effective compound and identified 1,2,3,4,6-penta-O-galloyl-β-D-glucose(PGG) by photometric analysis such as NMR and MASS. Then, we studied the angiogenic activity of PGG. It showed a cytotoxicity against SK-OV-3, SK-OV-3, HT1080 with IC/sub 50/ of 50 ug/ml approximately. It also effectively inhibited proliferation of HUVEC cells treated by bFGF to 30% of control at 20 ug/ml and cell migration to 80% at 10 ug in a dose dependent fashion. Tube formation of HUVEC cells on matrigel was effectively suppressed from 2.5 ug/ml of concentration by PGG. Moreover, it effectively recovered the dysfunction of gap junctional intercellular communication in WB-F344 rat liver epithelial cells caused by hydrogen peroxide at 4 ug/ml suggesting it potently can inhibit tumor promotion. Taken together, it indicates 1,2,3,4,6-penta-O-galloyl- β -D-glucose has antiangiogenic activity.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.