• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.186-200
• /
• 2023

This study aims to improve the usability of the white cane, which is walking equipment that most local visually impaired people use and carry when going out, and to contribute to the prevention of safety accidents and the walking rights of visually impaired people by providing improvement and resolution measures for the problems identified. Also, this study is a study on the visually impaired, primarily targeting the 1st to 2nd degree visually impaired people, who cannot go out on their own without walking equipment such as a white cane, corresponding to 20% among approximately 250,000 blind and low vision people in the Korean population. In the study process, the concept has been developed from the user's point of view in order that the white cane becomes a real help in the walking step of the visually impaired and the improvement of usability of the white cane, the main walking equipment for the visually impaired, are done by problem identification through the Double Diamond Model of Design Thinking (Empathize → Define → Ideate → Prototype → Test (verify)). As a result of the investigation in the process of Empathy, a total of five issues was synthesized, including an increase in the proportion of the visually impaired people, an insufficient workforce situation to help all the visually impaired, an improvement and advancement of assistive devices essential for the visually impaired, problems of damage, illegal occupation, demolition, maintenance about braille blocks, making braille block paradigms for the visually impaired and for everyone. In Ideate and Prototype steps, situations derived from brainstorming were grouped and the relationship were made through the KJ method, and specific situations and major causes were organized to establish the direction of the concept. The derived solutions and major functions are defined in four categories, and representative situations requiring solutions and major functions are organized into two user scenarios. Ideas were visualized by arranging the virtual Persona and Customer Journey Map according to the situation and producing a prototype through 3D modeling. Finally, in the evaluation, the final concept derived is a device such a smart cane for guidance for the visually impaired as ① a smart cane emphasizing portability + ② compatibility with other electronic devices + ③ a product with safety and convenience.

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.309-318
• /
• 2005

In order to present wireless Internet users with previously created HTML contents and applications, it is essential to research and develop the technology to efficiently convert HTML documents into documents and further provide a way to edit the WML documents. This paper describes the design and development of a WML converter and WML editor The WML converter can convert HTML pages in real time into WML documents that are suitable for the WAP environment. The WML editor enables creation and modification of WML documents in a WYSIWYG fashion. These tools enable the previous services based on HTML documents to be easily adapted to the wireless environment. The developed WML converter can be installed on a proxy server to support real time conversion of Web contents. It is superior to other converters in terms of the various image formats it supports and the improvements on the conversion of the link and frame tags. Users can continuously browse via links and also view frames. Automatic dividing of large WML documents into WML cards md user defined conversion rules are also supported. The WML editor is also integrated with the converter and provides an integrated WYSIWYG environment for creating, converting and publishing WML documents.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.1
• /
• pp.91-101
• /
• 2012

This study's purpose is to research the antioxidant power of Calaguala (Polypodium leucotomos, PL) as an oral supplement: Calaguala, a native of Central America, is a fern which belongs to the family polypodiaceae protecting the skin from the ultraviolet and active oxygen free radicals. The total 14 volunteers, each female 7 & male 7, were divided into 2 groups, then exposed to UV for 30 min after taking Calaguala and placebo. The total antioxidant capacity (TAC) was analyzed by taking the blood samples from anticubital vein 3 hours after UV exposure. First, Calaguala siginifcantly decreased the concentration of active oxygen free radicals 4 weeks later. The concentration of active oxygen free radical in PL group declined more than placebo group, when measured 30 min and 3 hours after UV exposure. Second, Calaguala did not significantly increase TAC 4 weeks later, but significantly decreased TAC 3 hours after exposure, when compared with placebo group. Now days, the photo allergy and photo aging caused by air pollution and ozone destruction have drastically increased, and thus the amount of UV radiation reaching the earth's surface increased. The increase of active free oxygen radicals resulted in accelerating the diseases and aging. The first superficial protecting protection by reflection & dispersion and the second body internal protection by taking oral photo antioxidant such as Calaguala should be continuously researched.

• Journal of Internet Computing and Services
• /
• v.18 no.4
• /
• pp.43-50
• /
• 2017

Embedded System includes touch, GPS, motion, and acceleration sensor, and can communicate with neighbor devices using wireless communication. Because Arduino with embedded system provides good environment for development and application, developers, engineers, designers, as well as artists, students have a great interest. They utilize Arduino in the robot, home appliances, fashion, culture and so on. In this paper, we design and implement a game using Arduino with embedded system which recognizes the human movement by moving away from one-dimensional game of the existing touch method. Implemented embedded system game measures gyro-sensor to recognize human movement and detects the attack success of the opponent by using touch sensor. Moreover, health of the game player is updated in the real time through the android phone-based database. In this paper, implemented embedded system-based game provides GUI screen of android phone. It is possible to select watching mode and competition mode. Also, it has low energy consumption and easy to expand because it send and receive data packet through recent Bluetooth communication.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2013

'Multi-scale mass-deployable cooperative robots' is a next generation robotics paradigm where a large number of robots that vary in size cooperate in a hierarchical fashion to collect information in various environments. While this paradigm can exhibit the effective solution for exploration of the wide area consisting of various types of terrain, its technical maturity is still in its infant state and many technical hurdles should be resolved to realize this paradigm. In this paper, we propose to develop new design and manufacturing methodologies for the multi-scale mass-deployable cooperative robots. In doing so, we present various fundamental technologies in four different research fields. (1) Adaptable design methods consist of compliant mechanisms and hierarchical structures which provide robots with a unified way to overcome various and irregular terrains. (2) Soft composite materials realize the compliancy in these structures. (3) Multi-scale integrative manufacturing techniques are convergence of traditional methods for producing various sized robots assembled by such materials. Finally, (4) the control and communication techniques for the massive swarm robot systems enable multiple functionally simple robots to accomplish the complex job by effective job distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.493-503
• /
• 2018

Recently, as living standards have improved, many people are becoming more interested in health, and self-training is increasing through exercise to prevent and manage pre-illness. In general, an imbalance of muscles causes asymmetry of posture, which can cause various diseases by accompanying an adjustment force, circulation action, displacement of internal organs, etc.. In this study, the development of fitness software that can be self - training among smart wears has attracted considerable attention in recent years. In this study, a technology was proposed for the commercialization of self - trainer fitness wear by a simulation through Android - based applications. Self - trainer fitness software was developed by combining a conductive polymer, fashion design, sewing, and electric and electronic technology to monitor the unbalance of the muscles during exercise and make smart wear that can calibrate the asymmetry by oneself. In particular, a polymer sensor was fabricated by deriving the optimal MWCNT concentration, and the electrode signal was collected by attaching the electrode to the optimal position, where the electrode signal line using the conductive fiber was designed and attached to collect the signal. A signal module that converts the bio-signals collected through electrical signal conversion and transmits them using Bluetooth communication was designed and manufactured. Self-trainer fitness software that can be commercialized was developed by combining noise cancellation with Android-based self-training application using a software algorithm method.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.106-112
• /
• 2003

Poly(trimethylene terephthalate)(PTT) fibers were treated by passing on the plate heater to study the annealing effect on the change of morphological structure and physical properties. In the X-ray diffraction curves of PTT annealed, a sharp peak at 2$\theta$=15.6$^{\circ}$ appeared and the peak intensity became stronger with the increase of annealing temperature and time. This peak was based on the (010) plane of PTT crystals. The crystallinity determined by density measurement was also increased by annealing. With the increases of temperature and time, the dynamic viscoelastic behaviors were shown to be a large reduction in T(tan $\delta$$_{max}$). The birefringence and $T_g$ were also reduced, but the melting temperature was the same. These results mean that the molecular chains in armorphous region are transfered into the crystalline legion, making the remained chains relaxed during annealing at tensionless state.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• The Journal of Natural Sciences
• /
• v.7
• /
• pp.133-162
• /
• 1995

Paderborn's companies, Wameling and Cassau, produce the liturgical vestments, which have much traditional artistic merit. And Kevelaerer Fahnen + Paramenten GmbH, located in Kevelater which is a place of pilgrimage of the Virgin Mary, was known to Europe, Africa, America and the Scandinavia Peninsula as the "Hidden Company" of liturgical vesments maker up to now. Paderborn and Kevelaer were the place of the center of the religious world and the Catholic ceremony during a good few centries. The Catholic liturgical vestiments of these 3 companies use versatile design, color, shape and techniques. These have not only the symbolism of religion, but also can meet our's expectations of utilization of modern textile art, art clothing and wide-all division of design. These give the understanding of symbolic meanings and harmony according to liturgical vestments to the believers. And these have an influence on mental thinking and induction of religious belief to the non-believers as the recognition and concerns about the religious art. The liturgical vestments are clothes which churchmen put on at the all ceremonial function of a mass, a sacrament, performance and a parade according to rules of church. These show the represen-tation of "Holy God" in silence and distinguish between common people and churchmen. And these represent a status and dignity of churchmen and induce majesty and respect to churchmen. Common clothes of the beginning of the Greece and Rome was developed to Christian clothes with the tendency of religion. There were no special uniforms distinguished from commen people until the Christianity was recognized officially by the Roman Emperor Constantinus at A.D.313. The color of liturgical vestments was originally white and changed to special colors according to liturgical day and each time by the Pope Innocentius at 12th century. The color and symbolic meaning of the liturgical vestments of present day was originated by the Pope St. Pius(1566-1572). Wool and Linen was used as decorations and materials in the beginnings and the special materials like silk was used after 4th century and beautiful materials made of gold thread was used at 12th century. It is expected that there is no critical changes to the liturgical vestments of future. But the development of liturgical vestments will continues slowly by the command of conservative church and will change to simple and convenient formes according to the culture, the trend of the times and the fashion of clothes. The companies of liturgical vestments develop versatile design, embroidery technique and realization of creative design for distinction of the liturgical vestments of each company and artistic progress. The cooperation of companies, artists and church will make the bright future of these 3 companies. We expect that our country will be a famous producing center of the liturgical vestments through the research and development of companies, participation of artists in religeous arts and concerts of church.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.860-868
• /
• 2009

To provide adequate fit for women over a range of sizes, the grading process should reflect their body dimensions. Current methods of creating sized garments are not addressing the need for a good or even an adequate fit for the easy-order system. This study suggests a grading rule allocating system that can improve the appropriateness of clothing for uniform easy-order system. Also, the study proposes a bi-directional grading method subdivided to horizontal and vertical direction. The grading rule allocating system suggested the size increments which improve the fitness of uniform. Using the 5th Size Korea data, the crosstabulation was conducted with 1305 females in the age group $20{\sim}49$ years, and the size increments including $155\sim165$ of height section and $79\sim94$ of bust section, was selected for easy-order system. Also, the bi-directional grading method subdivided in horizontal and vertical direction was followed by factor analysis based on the circumference and height. And the grading rules were calculated by regression analysis.