• 한국의류산업학회지
• /
• 제22권2호
• /
• pp.209-221
• /
• 2020

Recently, following the commercialization and market entry of smart clothes with diverse functions, smart clothes have been changing from technology-centered products to user-centered products. However, the analysis of consumer demand centered on actual commercialized products is lacking. Therefore, this study classified commercialized smart clothes by function and analyzed the demand and requirements of smart clothes according to sports/outdoor clothes consumption behaviors. As a result, consumers were classified according to their sports/outdoor clothes consumption behaviors into an outdoor leading group with high consumption propensity, an outdoor pursuit group with medium consumption propensity, and an outdoor following group with low consumption propensity. Among the commercialized smart clothes, those with a heartbeat measuring function, those with a heating function, and those with a light-emitting function were presented and demand analysis was conducted. According to the results, the outdoor leading group and the outdoor pursuit group had higher levels of awareness, preference, and purchase intentions than the outdoor following group. In addition, the outdoor leading group showed the highest level of purchase price acceptance while the outdoor following group showed the lowest level of purchase price acceptance. However, this study has a limitation that the acceptance for smart clothes were analyzed with consumers who had experience in sports outdoor clothes consumption. Therefore, in future, studies will be conducted with a wide range of consumers.

• 한국실내디자인학회논문집
• /
• 제21권1호
• /
• pp.136-147
• /
• 2012

This study researched about gender color preference as basic data for color application of fashion shop Facade. A HUE TONE system from V(vivid) to DK(dark) was used based on 10 colors of the IRI-120 color chart, color preference according to gender was investigated through a survey on males and females of over teenage years, and it was analyzed and presented as a color matching chart. And it was suggested as a color guideline through comprehensive analysis. Few definitions can be given through the results of this study. First, the preference degree according to gender was similar but different senses were shown visually even though the same adjective expressive vocabulary of a color image was suggested. This means there is an unchanging basic conservative disposition that males and females do not have and therefore they infer different ideas according to various environments and factors. Second, females showed more sensitive response to colors than males in the gender color preference result, which confirmed the deviation of each color group that is characteristically preferred according to a category. Third, high preferred color matches according to gender were shown for each vocabulary in various senses such as similar color matching, complementary color matching, separation color matching, and accent color matching. A universal empirical theory by general sensibility was obtained as the purpose of this study. This study suggested securement of a color design planning as basic data and the extent of usability by quantitatively showing the order of priority through the survey and analysis. Thus, the results of this study will be a great help as basic data for invigoration and commercialization of a color planning for designers and users.

• 한국의류산업학회지
• /
• 제16권1호
• /
• pp.128-136
• /
• 2014

The virtual try-on technologies of the current level have limitations with material expression as well as some difficulties with commercialization. There are differences in simulation results and subjective evaluations perceived by consumers according to the types and physical characteristics of materials used in virtual try-on simulations. This study were to analyze the exterior clothing shapes and visual images from 3D virtual try-on simulations with materials whose drapability was differentiated and then test the accuracy of the expression of the drapability of the materials. The study carried out 3D virtual try-on simulations by selecting flared skirts as an item to best express differences in drapability along with five materials of different physical properties and offered some basic data for greater utilization of virtual try-on simulations by comparing and analyzing them with the exterior shapes and visual images of actual flared skirts. The analysis results of hemline shapes between actual and virtual try-on according to the types of materials showed no match among the quantitative items of exterior shapes factors. There were no significant differences in the visual images except for "soft" according to the simulation methods, which means that the items can serve as part of a scale for visual image comparison. It is necessary to reflect quantitative numbers regarding "drapability" proposed in the study simulation software and to continue to build a systematic database for virtual simulations by investigating and testing various materials.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.801-811
• /
• 2022

In this study, we constructed a database of dyeing concentrations of all reactive dyes used for dyeing linen according to the thickness of the linen fabric and attempted to improve the reproducibility of the dyeing process for the commercialization of linen fabric materials. Linen fabric is a natural cellulose material that is comfortable and suitable for eco-friendly trends. It is a typical summer material with excellent breathability and thermal conductivity, quick moisture absorption and dissipation, and a cool touch. Dyeability and fastness were evaluated depending on the thickness of the linen fabric using a monochlorotriazine (MCT) reactive dye and bifunctional yellow, red, and blue dyes. All three colors of the MCT reactive dye and bifunctional dyes exhibited a darker shade as the fiber thickness of the marker increased. Fastness to washing was excellent at grades 4-5 or higher, regardless of the color of the dye and the number of linen fabrics. Although some color-fastness differences were noted, with the color change occurring most frequently with blue color, the fastness variations with dye type were mostly similar. The results of this study are expected to facilitate the selection of reactive dyes according to the thickness of the linen fabric based on the basic data from the laboratory, which will aid in the mass production of linen fabric and benefit the fashion industry.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.34-41
• /
• 2011

Surrealism is 20th century avant-garde art movement that gave the greatest impact. Surrealism art as Visual us consciousness that exists or is worth checking out. 1920 around the concept of the surreal appears on the Visual language is fine art molding, including design, fashion, advertising, etc, all of the art field. In addition, their artistic concept is limited to pure art without the commercialization and product as the transition you want to find a way to be. As a result, the concept of the surreal fine art as well as the design sector in particular, furniture design, but many more impact art trends. Therefore, this study examines the concept of the surrealism, appeared in the furniture design based on surrealism representation of research aims. And how these representations are modern furniture design in any affected for research. Representation and features about the analysis is largely four separated by the survey, and classified representation of research and analysis features.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.142-149
• /
• 2020

The purpose of this study was to investigate the dyeing properties of mugwort extract by nano-cellulose(n-cell). When dyeing cotton, rayon(artificial silk, called Ingyeon) and silk with mugwort extract, the difference with and without 2 wt% n-cell which it diluted to 0.6% treatment was compared. It was found that the addition of n-cell changed the values of L^∗, -a^∗(+red ~ -green), and b^∗(+yellow ~ -blue) of all scoured cotton, rayon and silk fabrics, compared to dyeing only mugwort extract. Furthermore, it was confirmed that the ΔE and the K/S value slightly increased in all of the dyed cotton, rayon, and silk fabrics treated with n-cell at the same time as dyeing compared to the untreated ones. Therefore, by treating the fabric with n-cell, a natural cellulose component, at the same time as dyeing, it is expected to maintain stable fastness, which is a disadvantage of dyeing using natural dyes, and contribute to the utilization and commercialization of other natural dyes.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.337-343
• /
• 2017

The purpose of this study is to investigate the optimal dyeing conditions and human-friendly properties of the extract from the branches of Alnus firma tree which is widely used for forestation and to provide basic information for quantification and commercialization of natural dyeing by discovering such as dye material. The optimal dyeing conditions, as a result, were shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time. In terms of dye uptake depending on the mordanting methods, it showed the best result in order of Fe, Sn, Cu and Al at pre-mordanting while found strong in order of Fe, Cu, Al and Sn at post-mordanting. Color fastness to washing and dry cleaning was found strong at grade 4-5 and fastness to light was rated at 2. The grade of change in color to rubbing and perspiration was good at 4-5. In aspects of functional properties, it showed excellent results of 98% deodorization rate at 120 minutes of dyeing time, 96.1% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus and Klebsiella pneuminiae. It is considered, therefore, the extract from Alnus firma tree is of great value as an eco-friendly natural dyestuff.

• 한국의상디자인학회지
• /
• 제22권1호
• /
• pp.33-44
• /
• 2020

The purpose of this study is to guide the research direction for securing the competitiveness of the textile industry by analyzing the trends of patent technology development for flexible materials and platform technologies of domestic and overseas textiles used for wearable devices. The study is based on patents from Korea (KIPO), USA (USPTO), Japan (JPO), Europe (EPO), PCT (WO), and China (SIPO), which were registered as of December 31, 2017. The analysis utilized 3,643 patents acquired from the WINTELIPS search DB. The technology classification system for patent analysis was divided into evangelist-based textile technology developments: human body (AA), fiber attachment patch development (AB), and service platform development (AC). The analysis findings are as follows: 1. The development of flexible materials and platform technologies for textile-based wearable devices has increased since 2000. In particular, China (SIPO) had the most patents. 2. In China, Japan, and Korea, most patent applicants are applied for by natives, but the US has a high proportion of foreigners applying for patents. 3. As for the amount of development of the evangelist-based textile technology (AA) was the most common with 1,203 (33%) cases. As a result of the above IP historical analysis, it can be seen that as a result of the global competition, domestic companies need to acquire IRP and standard technology, and promote commercialization by applying their products to smart wearables devices and other products.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.755-765
• /
• 2016

Recently, interest in monitoring health and sports is growing because of the emphasis on wellness, which is accelerating the development and commercialization of smart clothing for biosignal monitoring. In addition to exerciseeffect monitoring clothing that tracks heart rate and respiration, recently developed clothing makes it possible to monitor muscle balance using electromyogram (EMG). The electrode for EMG have to attached to an accurate location in order to obtain high-quality signals in surface EMG measurement. Therefore, this study develops monitoring clothing suitable for different types of human bodies and aims to extract suitable range of EMG according to movements in order to develop self-fitness monitoring clothing based on EMG measurement. This study identified and attached electrodes on six upper muscles and two lower muscles of ten males in their 20s. After selecting six main motions that create a load on muscles, the 8-ch wireless EMG system was used to measure amplitude value, noise, SNR and SNR (dB) in each part and statistical analysis was conducted using SPSS 20.0. As a result, the suitable range for EMG measurement to apply to clothing was identified as four parts in musculus pectoralis major; three parts in muscle rectus abdominis, two parts each in shoulder muscles, backbone erector, biceps brachii, triceps brachii, and musculus biceps femoris; and four part in quadriceps muscle of thigh. This was depicted diagrammatically on clothing, and the EMG-monitoring sensing locations were presented for development of self-fitness monitoring.

• 한국의류학회지
• /
• 제45권1호
• /
• pp.28-45
• /
• 2021

The importance of smart clothing as a product is increasingly emphasized as further growth in the potential of the smart market is expected. There is a high understanding and sympathy for the potential of smart clothing in the mass consumer market; therefore, commercialization is not actively carried out. This study enhances the understanding of the development direction of products with a focus on technical benefits, in order for smart clothing to gain access to customers as wearable devices. This study identifies major technologies used in smart clothing through an analysis of the patent technology status of smart clothing in Korea. Smart clothing is divided into three types: passive smart, active smart and advanced smart clothing based on a reaction mechanism and functional scope. We present the smart clothing and discuss the product features for three types. According to research, smart clothing products were equipped with passive, active, and advanced smart systems as well as provided new services by converging big data and AI technologies, rather than only using technologies such as sensors, controls, and actuators. Future directions for new smart clothing product development is also discussed in the conclusion.