• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.267-272
• /
• 2003

Tactel(Nylon66) union fabrics were woven with the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric structers were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100's was bigger than that of fabrics with CM80's, resulting that the fabrics with CM100's have better formability. In terms of weaving structure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of N/C fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM. 6) Koski of N/PU fabrics was the highest, Numeri of N/PU and N/Co-I were relatively higher than the others. THVs of N/CM-IV and N/CO-II were lower than the others, resulting that, twill structure was better than plain structure for a sport wear uses.

• 한국의상디자인학회지
• /
• 제21권3호
• /
• pp.1-11
• /
• 2019

This study examined the cause of the phenomenon of shrinkage in machine-embroidered fabrics, specifically those made of thin and pliable fabrics. Four woven fabrics and two knitted fabrics were selected as samples for analysis. The fabrics selected were silk organza, flax linen, polyester chiffon, cotton batiste, polyester raschel mesh, and cotton jersey. The thickness and drapability of the fabrics were observed and the shrinkage of the various types of embroidered fabrics produced using satin & step stitch techniques were measured. Moreover, the correlation between the shrinkage of the machine-embroidered fabrics and the drapability of the original fabrics was analyzed. Also, the colorfastness of six embroidery yarns was determined. The results of the study are as follows: first, the shrinkage of machine-embroidered fabrics increased at a greater rate than in embroidered knitted fabrics as compared to rates in embroidered woven fabrics. Moreover, in terms of stitch techniques, there was a greater shrinkage rate when satin stitch was applied compared to step stitch. Second, the shrinkage rate of machine-embroidered fabrics decreased when a stabilizer was fused onto the fabric. The shrinkage rate also decreased for fabrics when fused with paper stabilizer compared to those without it, and the rate decreased at a greater amount with paper stabilizer as compared to alginate film. Third, since there was a strong correlation between the shrinkage rate of the embroidered fabric and the drapability ratio of the original fabric, it was generally the case that the more pliable the fabric was, the greater the shrinkage rate was when the fabric was embroidered. Fourth, while the embroidery yarns mainly used in machine-embroidery presented an overall excellent level of colorfastness, there was slight color migration of level 4 to level 5 when using viscose rayon.

• 한국ITS학회 논문지
• /
• 제7권3호
• /
• pp.95-99
• /
• 2008

본 논문은 저 전력 설계 자동화를 위한 새로운 최소 자원 상위 레벨 합성 알고리즘을 제안한다. 제안된 알고리즘은 상위 레벨 합성 동안에 기능 연산자의 소비 전력 최소화를 위해 효율적인 접근 방식을 실행한다. 본 논문에서는 CDFG의 스위칭 활동을 감소시키기 위해 모든 제어 스텝을 하나씩 차례로 방문한다. 레지스터 공유 알고리즘은 모든 변수들의 생명 주기를 분석 한 후, 최소의 레지스터들을 결정한다. 또한 기능 단위의 입력 신호의 특성에 따라 모든 제어 스텝을 하나씩 차례로 방문하고, 갈망 방법에 따라 각 제어 스텝의 소비 전력을 최소화하여 자원 할당을 수행한다. 제안된 저 전력설계 자동화를 위한 최소 자원 상위 레벨 합성 알고리즘은 다양한 벤치마크들의 예를 통해 효율성을 입증한다.

• 한국지역사회생활과학회지
• /
• 제22권1호
• /
• pp.103-113
• /
• 2011

The purpose of the study was to examine formative features of embroidered norigae in form, color, pattern and expressive technique through positive analysis of relics and various of collections of work and to consider expressive features of embroidered norigae. The results of the study were as follows. First, embroidered norigae has handcrafted decoration. it was made by being sewed for women longing for their family's happiness. Embroidered norigae is a dress worn by women that is hung on a coat string or the waist part of a skirt. Second, it is eco-environmental. Embroidered norigae applied things seen in nature such as flowers, butterflies and bees to its pattern. Third, it has practicality. Embroidered norigae has high practical value besides a decorative function. Needle case norigae and incense case norigae provide functions in accordance with women's wisdom and skill as well as practicality. Fourth, it is praying for good luck. Women embroidered patterns symbolizing their desires in life such as their family's happiness, wealth, many sons and a long life. Fifth, it has balance and harmony. The knot of embroidered norigae has a perfect symmetry in the front/back part and in the right/left part. And the main body and tassel are symetrical in the right/left part, which gives stability and comfortableness. Embroidered norigae is classified into knot, main body and decorative part in its form. The three kinds express their unique beauty by being harmonized together. Finally, it has a property of melody. Movement of the tassel has a property of melody shaken by the wind and movement of its wearer.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.669-675
• /
• 2009

연질 PVC 대체를 위한 비변색 타입의 무용제형 상온 액상수지를 폴리올을 경화제로 사용하는 폴리우레탄수지 구조제어 설계를 통한 프리폴리머 합성방법을 응용하여 제조할 수 있었다. Macro-glycol, 분자량 및 반응조건의 영향 등을 고찰하여 최적의 작업성과 물성을 가지는 무용제형 상온액상수지를 제조하였으며, 우수한 기계적인 특성과 함께 유색작업을 위한 안료의 분산성 등에서도 우수하였고, Tg가 $-40^{\circ}C$의 값을 나타내었다. 또한 자외선 노출이나 질소산화물에 의한 황변특성도 개선할 수 있었다.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.51-60
• /
• 2010

This research works on the effects of drawing conditions on the physical properties of the drawn worsted yarns. The drawn worsted yarns were made by the yarn drawing system under various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn, and concentration of oxidizing agent. The drawn worsted yarns from 2/80Nm to 2/90Nm were obtained from 2/60Nm worsted yarns, the surface and cross-sectional shapes and tensile properties of these various specimens were measured and discussed with the various drawing conditions. The drawing of worsted yarn made constituent wool fiber scratched and made it changing to polygonal cross-sectional shape. The tenacity and modulus were increased with draw ratio and concentration of reducing agent. And tensile strain was increased with draw ratio, which decreased with concentration of reducing agent.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.272-281
• /
• 2010

This paper surveys the effects of drawing conditions of the worsted staple yarns on the mechanical properties of the knitted fabrics for highly aesthetical fabrics. The drawn worsted yarns were made on the yarn drawing system with various draw ratios under the fixed conditions of setting time, reduction and oxidation. The knitted fabric specimens were prepared on the 16 gauge circular knitting machine using these drawn worsted staple yarns. The tensile, shear, bending, compression and surface properties of these knitted fabrics were measured by KES-FB-AUTO-A system and also discussed with the drawing conditions. The tensile linearity, shear stiffness and bending rigidity decreased with increasing draw ratio. Any changes were not shown on the compressional properties with drawing conditions. But the friction coefficient of the knitted fabric on the course direction increased with increasing draw ratio, while there was no change according to the draw ratio on the wale direction.

• 한국염색가공학회지
• /
• 제26권2호
• /
• pp.131-142
• /
• 2014

This paper was focused on investigating synthetic fabrics treated with persimmon juice by padding mangle repeatedly. The merit of dyeing by pad-dry method was easier color reproduction than dyeing by immersion method. With increasing number of padding, the dyed nylon fabrics showed deeper yellow-red colors, but dyed polyester fabrics had no uniform tendency. The dyed synthetic fabrics had a 3rd grade of ligtht, 4~5th grade of perspiration fastness, 5th grade of stain washing fastness, and 3~5th grade of rubbing fastness. As the number of padding and exposed time to sunlight or UV light increase, the value of K/S and ${\Delta}E$ increased and the colors become much deeper gradually. The color development had completed about 70 hours exposure to UV light. As the padding time of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced, respectively. Also, the dyed synthetic fabrics had good antibacterial activity and deodorization.

• 감성과학
• /
• 제20권2호
• /
• pp.117-126
• /
• 2017

본 연구에서는 직/편물 8종을 대상으로 이들 수직방향과 수평방향 수분이동특성 측정방법에 따른 소재들의 수분이동 특성을 분석하였다. 또한, 8종의 시편의 MMT에 의한 건조특성을 수직 건조 측정 결과와 비교하여 논의하였다. 수평수분이동 방법인 MMT 시험 결과는 수직법인 바이렉 방법의 결과와 유사한 거동을 나타내었다. 대나무, 린넨 및 면/나일론 복합 소재는 드롭법의 흡수시간은 짧았으며, 표면의 낮은 접촉각 및 직물의 높은 다공성에 기인한 것으로 판단되며, 친수성 스테이플 섬유의 구조와 상관이 있을 것으로 보인다. MMT에 의한 건조특성은 니트 및 대나무 직물의 최대 흡수반경이 가장 우수했으며, 수식 건조법에 비해 차이를 나타내었다. MMT 방법의 건조속도는 직물의 두께와 포화수분 흡수율과 높은 상관성을 가졌으며, 회귀계수는 각각 0.9와 0.88이었다. 이는 직물의 두께가 얇을수록 위킹 및 건조특성이 우수하며, 기능성 소재기획시 착용 내구성을 판단하는데 중요함을 의미한다. 또한 상이한 섬유소재, 실 및 구조의 소재에 대한 수분이동특성(위킹, 건조)는 측정 방법에 따라 다른 결과를 나타내었다.

• 한국생활과학회지
• /
• 제16권5호
• /
• pp.979-986
• /
• 2007

The purpose of this study is to investigate the dyeability, and the hand of soybean/cotton blended fabric after dyeing with natural and synthetic dyes. Soybean/cotton blended fabrics dyed with extracted solution from turmeric, sappan wood, gardenia and synthetic dyes(weak-acid dyes, reactive dyes, direct dyes). The hand value of soybean/cotton blended fabrics dyed with 6 different dyes was measured using Kawabata Evaluation System. The results are as follows; 1. The K/S value of the soybean/cotton blended fabric dyed with sappan wood extracts was the highest. 2. The color fastness of the soybean/cotton blended fabric dyed with reactive dyes was excellent. The fastness to the light of the same fabric was much better than the other fabrics. 3. Linearity of load-extension and tensile energy of the soybean/cotton blended fabric dyed with sappan wood extracts showed very high. Shear stiffness of the soybean/cotton blended fabric dyed with weak-acid dyes was much higher than that of fabric of dyed with reactive dyes. Bending property of the fabrics dyed with natural colorants(sappan wood, gardenia) showed very high, but that the fabric dyed with reactive dyes was very poor. 4. In the primary hand value, stiffness and anti-drape stiffness of the fabric dyed with weak-acid dyes showed the highest. Fullness and softness of the fabric dyed with weak-acid dyes showed very low.