• KDI Journal of Economic Policy
• /
• v.14 no.3
• /
• pp.3-21
• /
• 1992

By localizing the production of core parts and intermediate goods previously imported from Japan, Korean firms have been striving to increase their market share and profit in the final goods market in which Japanese firms are dominating. Korean producers' efforts, however, have often been thwarted by Japanese suppliers' "strategic" behavior. This competitive strategy involves Japanese exporters supplying parts and intermediate goods at very high prices until Korean firms must locally develop them, and then setting the prices far below the previous level so that the profitability of localization is dramatically reduced, or even means a loss for the Korean manufacturer. This paper intends to explain the strategic behavior of Japanese firms through the concepts of strategic interactions and joint economies. Strategic interactions can be aggressive or accommodating depending on whether competitors are dealing with strategic substitutes or complements. Joint economies exist in multi-stage competition when competition in the previous state favorably influences "profits" of the ensuing stage. Competiton between Korean and Japanese firms (a two-stage game involving production and technology rivalries) can be characterized by joint economies and strategic substitutes: joint economies since technological improvement results in more profits in the production stage; and strategic substitutes since an increase in marginal profits of one firm brings about a decrease in marginal profits of the other in a duopolitic production stage. This implies that the flood of "low price" Japense substitutes is an almost "natural" phenomenon in the context of the duopolistic market described in this paper. In the technology competition stage, on the other hand, technology development and technology transfer can be either strategic complements or substitutes. This implies that, in typical comparative static analyses, the effect of changes in exogenous variables cannot be expected a priori. Thus it becomes very difficult to determine the desirability of applying various policy measures such as countervailing duties, R&D subsidies, and creating demand for localized products. For these reasons, it is indeed likely that the measures suggested as means of circumventing the strategic behavior of Japanese firms (and enhancing technological development of Korean firms) may not work.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.105-110
• /
• 2009

The On Line Electric Vehicles(OLEV) that can pick up inductive power from underground coils on driving with high efficiency have been developed this year, and is now proposed in this paper. The IPS(Inductive Power Supply) system consists of power supply inverters, power supply rails, pick up modules, and a regulator. There are 3 generations of IPS have been developed so far, and the $4^{th}$ generation IPS is being developed. The $1^{st}$ generation has been demonstrated this Feb. 27, which is equipped with mechanically auto tracking pick-up module with 1cm air gap, and showed 80% power efficiency. The $2^{nd}$ generation IPS applied to an 120kW (average)/240kW(peak) motor powered electric bus has 17cm air gap with 72% power efficiency. For the $2^{nd}$ generation IPS, the Power supply inverter has 440V, 3phase input and 200A @ 20kHz output. The test power supply rail of 240m long is segmented by 60m each, where newly developed core structure and power cable are constructed under the road covered with asphalt of 5cm thickness. The pick-up modules which consist of core, winding wire, and rectifiers are fixed to the bottom of the bus which can carry more than 40 passengers and can pick up max. 60kW. To remove parasitic component and to transfer maximum power between them resonant circuit topology is applied to the primary and secondary sides. The EMF level is below 62.5mG at 1.75m from the center of the road to meet the regulation. Several effective ways of reducing EMF levels have been developed. In addition, effective ways to solve problems related high frequency power cables buried in ground and it's proof from soil have been studied also. This development shows that the IPS system is capable of supplying enough power to the pick-up of OLEV and can reduce battery size, weight and cost, which means the IPS with OLEV is one of the best candidate for EV.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.10
• /
• pp.724-739
• /
• 2009

This paper suggests the energy-efficient message delivery scheme and the software platform which exploits the multiple network interfaces of the mobile terminals and GPS in the current mobile devices. The mobile terminals determine the delivery method among 'direct', 'indirect', and 'WAN' based on the position information of itself and other terminals. 'Direct' method sends a message directly to the target terminal using local RAT. 'Indirect' method extends the service area by exploiting intermediate terminals as relay node. If the target terminal is too far to reach through 'direct' or 'indirect' method, the message is sent using wireless WAN technology. Our proposed scheme exploits the position information and, thus, power consumption is drastically reduced in determining handover time and direction. Network simulation results show that our proposed delivery scheme improves the message transfer efficiency and the handover detection latency. We implemented a message platform in a smart phone realizing the proposed delivery scheme. We compared our platform with other typical message platforms from energy efficiency aspect by observing the real power consumption and applying the mathematical modeling. The comparison results show that our platform requires significantly less power.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1438-1449
• /
• 2011

UWSNs(Underwater Wireless Sensor Networks) need effective modeling fitted to the customized type of application and its covering area. In particular it requires an energy efficient data aggregation method for such customized application. In this paper, we envisage the application oriented model for monitoring the pollution or intrusion detection over a given underwater area. The suggested model is based on the honeycomb array of hexagonal prisms. In this model, the purpose of data aggregation is that the head node of each layer(cluster) receives just one event data arrived firstly and transfer this and its position data to the base station effectively in the manner of energy efficiency and simplicity without duplication. Here if we apply the existent data aggregation methods to this kind of application, the result is far from energy efficiency due to the complexity of the data aggregation process based on the shortest path or multicast tree. In this paper we propose three energy efficient and simple data aggregation methods in the domain of cluster and three in the domain of inter-cluster respectively. Based on the comparative performance analysis of the possible combination pairs in the two domains, we derive the best energy efficient data aggregation method for the suggested application.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.374-378
• /
• 1997

Operative procedures such as core drilling with and without fibular bone grafting have been recognized as the treatment methods for osteonecrosis of femoral head(ONFH) by delaying or preventing the collapse of the femoral head. In addition, core drilling with cementation using polymethylmethacrylate (PMMA) has been proposed recently as another surgical method. However, no definite treatment modality has been found yet while operative procedures remain controversial to many clinicians In this study, a finite element method(FEM) was employed to analyze and compare various surgical procedures of ONFH to provide a biomechanical insight. This study was based upon biomechanical findings which suggest stress concentration within the femoral head may facilitate the progression of the necrosis and eventual collapse. For this purpose, five anatomically relevant hip models were constructed in three dimensions : they were (1) intact(Type I), (2) necrotic(Type II), (3) core drilled only(Type III), (4) core drilled with fibular bone graft(Type IV), and (5) core drilled with cementation(Type V). Physiologically relevant loading were simulated. Resulting stresses were calculated. Our results showed that the volumetric percentage subjected to high stress in the necrotic cancellous region was greatest in the core drilled only model(Type III), followed by the necrotic(Type II), the bone graft (Type IV), and the cemented(Type V) models. Von Mises stresses at the tip of the graft(Type IV) was found to be twice more than those of cemented core(Type V) indicating the likelihood of the implant failure. In addition, stresses within the cemented core(Type V) were more evenly distributed and relatively lower than within the fibular bone graft(Type IV). In conclusion, our biomechanical analyses have demonstrated that the bone graft method(Type IV) and the cementation method(Type V) are both superior to the core decompression method(Type III) by reducing the high stress regions within the necrotic cancellous bone. Also it was found that the core region filled with PMMA(Type V) provides far smoother transfer of physiological load without causing the concentration of malignant stresses which may lead to the failure than with the fibular bone graft(Type IV). Therefore, considering the above results along with the degree of difficulties and risk of infection involved with preparation of the fibular bone graft, the cementation method appears to be a promising surgical treatment for the early stage of osteonecrosis of the femoral head.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.588-591
• /
• 2018

Baculovirus was originally isolated from the alfalfa looper and contains a 134-kbp genome with 154 open reading frames (ORF). The major capsid protein VP39 together with some minor proteins forms the nucleocapsid ($21nm{\times}260nm$) that encloses the DNA with p6.9 protein. They are double-stranded, circular, supercoiled DNA molecules in a rod-shaped capsid. Wild-type baculoviruses exhibit both lytic and occluded life cycles that develop independently throughout the three phases of virus replication. Recombinant baculoviruses can transfer their vectors and express their recombinant proteins in a wide range of mammalian cell types. Especially, inclusion of a dominant selectable marker in these baculoviral vectors can express diverse recombinant genes in many cells. Baculoviral vectors were reconstructed with cytomegalovirus (CMV) promoter,uroplakin II promoter, polyhedron promoter, vesicular stomatitis virus G (VSVG), enhanced green fluorescent protein (EGFP), protein transduction domain (PTD) gene and so on. These reconstructed vectors were infected into various cell and cell lines. We performed transfection and expression of these recombinant vectors comparison with other control vectors. From this study, we knew that transfection and expression of these recombinant vectors have higher efficacy than any control vector. This work was supported by a grant from Mid-Career Researcher Program(NRF-2016R1A2B4016552) through the National Research Foundation of Korea(NRF) funded by the Ministry of Science, ICT & Future Planning(MSIP).

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.142-151
• /
• 2002

Claesson(2001)'s analytical solution, and two numerical models with Dirichlet and Neuman interior boundary condition respectively were investigated to estimate the transient temperature distribution with distances from the Taejon underground food cold storage pilot cavern. Claesson's solution, which is based on constant temperature boundary condition at the rock wall during a temperature decline step, showed relatively good agreement with temperature measurements in the rock mass in order of average error difference, 0.89$\^{C}$ without any adjustments on laboratory thermal properties to represent the rock mass. For the numerical model with heat flux through the rock wall, a boundary condition setting technique was newly proposed to overcome the difficulty of prescribing variable convective heat tranfer coefficient and far-field air temperature inside the cavern as they may be certainly changed according to the cooling-down time. The results showed also good agreement with measurements in order of average error difference, 1.58$\^{C}$, and were compared to those of the numerical model with fixed temperature at the rock wall. Finally, the most proper procedure to precisely predict the temperature profile around a cavern was proposed as a series of analysis steps including an analytical exact solution and numerical models.

• The Journal of Korean Association of Computer Education
• /
• v.7 no.1
• /
• pp.141-149
• /
• 2004

Today there are many Web courseware systems for formative evaluation and feedback. Formative evaluation and feedback provided according to users' response in most Web courseware systems, however, are simple texts showing only whether correct or wrong, correct answers, relevant information, etc., far deviated from actual context. Thus such a system may weaken the corrective function of feedback and, as a result, reduce learners' understanding of contents and the possibility of learning transfer. In addition, according to the learning theory of constructivism, learning is influenced by the situation, in which it happens, and knowledge is learned and transferred differently depending on the context in which it is learned. In the background, this study designed and implemented a contextual error-correction feedback system that can provide feedback in a context closely related and similar to the relevant situation according to the response of learners when formative evaluation is carried out in Web courseware. In addition, it applied 'correction/correct-answer-providing feedback', 'relevant information providing feedback' and 'contextual error-correction feedback' to Web courseware for learning actual productivity S/W and verified if 'contextual error-correction feedback' is more effective than other two types of feedback for learners' academic achievement.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.211-221
• /
• 2003

At Aspo hard rock laboratory in Sweden, an in-situ heater experiment called "$\"{A}"{s}"{p}"{o}$ Pillar Stability Experiment (APSE)" is prepared to assess capability to predict spatting and stability in a rock mass between deposition holes for radioactive waste. To Predict reasonably fracturing process at rock pillar under a planned configuration before testing, a boundary element code FRACOD has been applied for modelling. The code has been improved to simulate explicitly fracture evolution both at rock boundaries and in intact rocks. A new inverse stress reconstruction technique using boundary element has been also developed to transfer stress field by excavation and thermal loading into the FRACOD model. This article presents the results from predictive modelling far the planned in-situ test condition. Excavation induced stresses might cause slight fracturing in the pillar walls. Typical shear fractures have been initiated and propagated near central pillar walls during 120 days of heating, but overall rock mass remained stable under the considered configuration. The effects of pre-existing joints and properties of fractures are also discussed. It is found from the results that FRACOD can properly model essential rock spatting and propagation at deep tunnels and boreholes.at deep tunnels and boreholes.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.69-74
• /
• 2008

This study aims to establish the efficient soybean transformation system and develop soybean [Glycine max (L.) Merill] transformants using cotyledonary node explants. The cotyledonary node of soybean were co-cultivated with Agrobacterium tumefaciens strains (KYRT1, EHA105). These strains contain the binary vector pCAMBIA3301 which carries a herbicide-resistant far gene. Korean cultivars (Danbaekkong, Eunhakong) and foreign cultivars (Jack, Peking) were the most efficient in regenerating cotyledonary node. Therefore, they were chosen for the transformation. Results showed that the T-DNA transfer reached up to 60% and transformation efficiency reached up to 3% in the cotyledonary node explants from Jack cultivar, co-cultivated with EHA105 strain. Histochemical GUS evaluation showed that 12 individual lines, transformed with the 현 gene, have positive response. The transformed soybeans have been confirmed in the $T_0$ generation through phenotypic assay using herbicide $Basta^{(R)}$ and Southern blot analysis.