Drying characteristics of squids under two dry conditions were investigated using far infrared and heated air. Dry temperatures of 40, 50 and $60^{\circ}C$ with air speed of 0.6, 0.8 and 1.2 m/s were used for evaluating far infrared squid drying. Heated air squid drying at 40 and $50^{\circ}C$ with air speed of 0.8 m/s was used as a control treatment. The two drying were evaluated in terms of drying rate, color, TBA value, aerobic bacteria, cutting shear, penetration strength, and energy consumption. The drying rate of far infrared drying was relatively faster than that of heated air drying. The drying time of far infrared drying was reduced as the drying temperature increased. The color difference of far infrared dried squids was from 18.81 to 22.85, and heated air dried squid had the color different from 23.94 to 24.09. Far infrared dried squid had relatively smaller TBA values that indicate a level of rancidity. The aerobic bacteria of heated air dried squid increased from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g before and after drying, respectively. Far infrared dried squid had relatively smaller increase (from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g). The cutting shear and penetration strength for far infrared dried squids was relatively lower. In addition, far infrared squid drying consumed relatively less energy compared to heated air drying.
Kim, Hyun-bok;Ju, Wan-Taek;Sung, Gyoo Byung;Lee, Myeong-Lyeol;Seo, Sang-Deok
International Journal of Industrial Entomology and Biomaterials
/
제35권1호
/
pp.45-50
/
2017
Using the relatively low-cost, far-infrared dryer inhibiting the destruction of a variety of physiologically active components of the mulberry fruit, we have studied to make semidry mulberry fruit that can be kept at room temperature for a long time. By adjusting the temperature of the far-infrared dryer step-by-step, we developed a semi-dry method of maintaining the shape of the mulberry fruit. In addition, by drying the coating of honey after removing the juice generated by the mulberry fruit thawing process improved the acceptability of the taste of fruit. We conducted heat treatment mulberry fruit into a $95^{\circ}C$ infrared dryer 5 hours to thaw the frozen mulberry fruit. After 10 to 20% of honey coating, the primary drying ($95^{\circ}C$, 5 hours) was implemented. then, the secondary drying was conducted after controlling the temperature of the far infrared dryer $60^{\circ}C$, for 10 hours. These manufacture process was able to obtain semi-dried mulberry fruit. Dry weight ratio and moisture content were around 25%, and around 16% level respectively. It was to enable long-term storage at room temperature. Therefore, it is suggested that the method of using the far-infrared drying machine to manufacture semi-dried mulberry fruit can be a way to improve the farm income if applied to the farm.
Purpose: The present study is aimed at examining the drying characteristics of sea tangle through a combination of microwave and far-infrared drying experiment and finding the optimal drying conditions. Methods: Sea tangle was cleaned and cut into fine pieces (5mm) before they were subjected to combinational drying by microwave and far-infrared ray. The amount of specimen per drying is 2 kg. The finely cut pieces of sea tangle were preheated in a microwave dryer for three different lengths of time (10, 15, and 20 min). Subsequently, they were dried using a far-infrared dryer at tow temperatures ($90^{\circ}C$ and $100^{\circ}C$) at an air velocity of 0.8 m/s until the final moisture content reduced to 10%. Results: Sea tangle dried under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Of the drying models verified in this study, the logarithmic model showed high accuracy with the coefficient of determination $R^2>0.7825$ and RMSE<0.1095. The rehydration ratio of sea tangle was the highest (12.87 g water/g dry matter) under the condition of 15 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. The energy consumption for the combination of microwave and far-infrared drying was the lowest (4.78 kJ/kg water) under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Conclusions: Considering the drying time, discoloration during drying, rehydration ratio, and energy consumption for the drying of sea tangle, the optimal drying conditions for high-quality sea tangle are 15 min of preheating in a microwave dryer and drying at $100^{\circ}C$ by a far-infrared dryer.
In order to produce the high-quality of dried red pepper with respect to a color and a taste we developed a automatic drier equipped with combined several heat energies(ADCHE). and compared the quality of ADCHE-treated red pepper with that of the pepper treated with conventional dryings such as natural, hot-air, and far-infrared ray dryings. The results obtained were as follows : (1) The contents of capsanthin varied significantly with drying methods within the range of 1.7 to 6. 4mg/g dry weight. The capsanthin level of red pepper treated with far-infrared ray drying was higher than that of the pepper treated with ADCHE showed the highest at 51.46mg/g dry weight of three drying methods. (2) As a result of determination of color intensity of-red-pepper using-a colorimeter, the red color intensity of the peppers was affected by drying methods irrespective of drying temperature, and especially a value of red pepper treated with ADCHE was appeared to be 19. 1, indicated that this pepper have the most bright color intensity. (3) The contents of soluble browing subatances increased with a increase in drying temperature, but L* value of red pepper treated with ADCHE was appeared to be 0.187, indicated that this red pepper have the most clear red color (4) The changes of capsanthin level of red pepper according to drying methodes did not show significantly, but generally a decreasing rate of capsanthin levels were lower in that order ADCHE
Park, Bum-Soon;Kang, Tae-Hwan;Lee, Jeong-Hyeon;Choi, Jong-Min;Han, Chung-Su
Journal of Biosystems Engineering
/
제40권1호
/
pp.61-66
/
2015
Purpose: The purpose of this study was to establish conditions to dry a radish by examining the drying and quality characteristics depending on the air temperature and velocity of a far infrared conveyor dryer. Methods: A sample of weighing 6 kg was dried until the moisture content reached $15{\pm}0.5%$ (w.b.). Four temperatures (50, 60, 70, and $80^{\circ}C$) and three air velocity levels (0.4, 0.6, and 0.8 m/s) were employed as the drying factors. Results: The drying rate increased with the increase in the temperature and air velocity but decreased with time. However, the drying rate was influenced by temperature rather than velocity. At a temperature $50^{\circ}C$ with a air velocity of 0.4 m/s, it took 350 min for the radish to dry which was the longest drying time; $80^{\circ}C$ with a air velocity of 0.8m/s, it took 180 min for the radish to dry, which was the shortest drying time. ${\Delta}E$ (the color difference value) increased with the increase in temperature and air velocity. The browning and rehydration ratio increased as the temperature rose. Energy consumption decreased with the increased temperature and air velocity. Conclusions: Based on the results of this study, the best drying conditions for the radish were determined to be a temperature of $70^{\circ}C$ with an air velocity of 0.8 m/s.
In case of wood flooring, the high emissivity would be one of the most important properties especially as the cover material of underfloor heating system. The FIR (Far Infrared) materials such as wood emit FIR energy by heating, which has been used as the medical therapy such as dry sauna. This research investigated the emissivity and the emission power of wood composites by comparing the amount of the three heat transfer modes transferred by infrared radiation which came from the increased temperature of the bottom board of the plywood box by the heater. The results showed the value of radiation mode was the highest mode for the plywood box, and the convection mode was the main mode for the aluminum box. The rate of convection was 81.8% in the aluminum box and 48.2% in the plywood box, respectively. In case of the rate of radiation, the aluminum box showed only 15.4% and the plywood box showed 51%. The emissivity and the emission power of birch plywood showed the same values as those of wood. The amount of energy required for the temperature rising of water within vial in the aluminum box and in the plywood box were 3.32 kJ and 6.70 kJ respectively, which showed that the vial temperature of the plywood box was two times higher than that of the aluminum box.
본 시험은 우리나라에서 원적외선을 이용한 이탈리안 라이그라스 인공건초 조제 가능성을 확인하기 위해 수행되었다. 본 시험에 사용된 기계는 온도, 송풍량, 원적외선 방사량을 조절할 수 있는 원적외선 건조기로 5월에 수확한 이탈리안 라이그라스를 대상으로 실시하였다. 건조를 위한 조건은 전체 9개의 조건을 선택하여 수행하였으며 각각의 조건은 방사율 42~45 %로 설정을 하였으며 내부 온도는 65℃로 설정하였다. 기기내의 기류의 속도는 40~60m/s로 하였으며, 전체적인 건조시간은 방사량 42%는 30분, 43%는 25분 그리고 45%는 20분으로 하여 수행하였다. 각각의 건조조건에 따른 최종 건물함량은 평균 88.5%로 나타났으며 전처리에서 건초에 적합한 건물함량을 나타내었다. 건조 조건에 따른 전력 소비량을 보면 45% 방사량에서 20분간을 건조한 처리구에서 가장 낮게 나타났다. 건조율에 있어서는 1~5번 건조 조건에서는 차이가 없었으나 6~7조건에서는 유의적으로 낮은 경향을 보였다. 사료가치에 있어서는 대부분의 건조조건에서 원물보다 CP, IVDMD는 높았고 ADF, NDF 함량은 낮게 나타났으며 대체적으로 4, 7 및 8번 건조 조건에서 높은 경향을 보였다. 이상의 결과를 통하여 건조속도, 전력량, 품질 등을 고려할 때 7 및 8번 건조조건이 가장 유리한 것으로 판단되었다.
To develope a high value-added fiber products which is useful in the human body physiology, the Macban stone was deposited on the PET fabric by sputtering and its effects were investigated. Then, a Macban stone target was prepared for sputtering treatment and treated on the PET fabric by RF sputtering process. After treatment, surface observation by SEM, far-infrared emissivity and emissive power, the fastness to washing and light, bacteriostatic rate, electrostatic, drape stiffness, and breaking strength of PET fabric were investigated. From these investigation, the following conclusions were obtained. 1) The Macban stone was able to deposit on the PET fabric, by the RF sputtering treatment which is eco-friendly dry textile finishing. 2) The far-infrared emissivity and emissive power of sputtered PET fabrics were increased. 3) When PET fabric was treated by sputtering with Macban stone, the amount of deposited Macban stone increased with increasing treatment time and it was deposited on the fabric surface firmly. 4) The bacteriostatic rate of sputtered PET fabrics was about 20%. 5) The electrostatic charge of fiber surface was reduced by sputtering. 6) The fastness washing to light of dyed fabric were improved by the deposition of Macban stone, but the breaking strength was not changed by sputtering. 7) The drape stiffness of sputtered PET fabrics increased with increasing treatment time.
가래나무 잎을 원적외선 30, 40 및 50 v에서 각각 10, 20 및 30분을 처리하였다. 원적외선을 조사한 잎의 총 폴리페놀 함량, 총 플라보노이드 함량, 잎 추출물의 DPPH radical 소거 활성 등을 분석한 결과, 원적외선 30 v에서 20분간 조사한 처리구에서 총 폴리페놀 함량은 25.43 mg/g로 , 총 플라보노이드 함량은 39.38 mg/g으로 가장 높게 나타났다. 그 반면에, 원적외선 50 v에서 30분간 조사한 처리구에서 총폴리페놀 함량은 16.93 mg/g으로, 총플라보노이드 함량은 23.78 mg/g으로 가장 낮게 나타났다. 전체적으로 원적외선 처리에 의해 잎에 함유한 항산화 물질의 함량의 증가는 물론, 그 추출물의 항산화 활성도 증가하는 것을 알 수 있었다. 하지만 원적외선 처리가 가래나무에 함유한 어떠한 특정적인 물질들의 증가에 관하여서는 추후에 더욱 많은 연구가 필요할 것으로 사료된다.
In order to product dry goods of Gastrodiae Rhizoma with high quality, tubers were treated with various dry methods such as cutting, drying methods and steaming. In cutting than no cutting, they were shown shorter drying hours and lower drying yield. Drying hours in freeze drying was shorter than those of hot air and far-infrared ray. Total polyphenol content was higher in cutting than no cutting. According to steaming, it was increased in freeze drying but decreased rapidly in the other dry methods. Among all treatments, hot air dry treatment with cutting and no steaming had the highest total polyphenol content. Gastrodin and 4-hydroxybenzyl alcohol contents generally were similar or higher in cutting than no cutting. By steaming, gastrodin content in freeze drying was decreased but 4-hydroxybenzyl alcohol content was increased. But hot-air and infrared ray dry, they were shown opposite results. Gastrodin and 4-hydroxybenzyl alcohol contents showed opposite reaction to each other and were shown various response by dry methods.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.