• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.65-76
• /
• 2001

Field data have been recorded as the time to failure or the number of failure of systems. We consider the time to failure and covariate variables in some pre-specified follow-up or warranty period. This paper aims to investigate study on the reliability estimation when some additional field data can be collected within-warranty period or after-warranty period. A various likelihood-based methods are outlined and examined for exponential or Weibull distribution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1080-1082
• /
• 2003

To develop a reliability analysis program applied to the diagnosis for air operated valve's integrity. we collected, analyzed AOV failure data from foreign and domestic nuclear power plants, and classified whole subjects of this program into several groups according to type and size. We established a theoretical basis using Lognormal Distribution and Bayesian Theory to develop analysis methodology. The result of this program was applied to the calculation of operational unavailability of AOV, and the effect of AOV's failure. Also this program can be applied to the development of diagnostic technique considering AOV environment (temperature, pressure), and setting-up maintenance cycle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.115-120
• /
• 2008

In this study, effects of surface roughness on adhesive strength of heat-resistant adhesive RTV88 were examined. Sandblast was used to generate rough surfaces on aluminum adherends, and then tensile-shear tests of Al/RTV88 single lap joints were performed. The shear strength was shown to be affected by the surface roughness. Effective area, peel failure area, and cohesive failure area were introduced to explain the effects of surface roughness on the adhesive strength. An empirical relation for the failure force was proposed based on these parameters and verified by the test results.

• 품질경영학회지
• /
• 제29권4호
• /
• pp.92-102
• /
• 2001

Software testing during development and operation should exercise to obtain the desired software quality and leave failure data set. So far, many software reliability models are classified and can be used to measure a software reliability only based on its failure history But, in practice, developers or testers of software systems must decide which existing software reliability model can be fitted. In this paper, we will show that an appropriate reliability model can be selected by considering relations between characteristics of each testing environment and models' assumptions. Several methods of software testing are presented and discussed. Also, unit test, integrated test, function test and system test that are sequentially exercised during development will be introduced.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.26-27
• /
• 2006

Capping mechanisms during the compaction of pharmaceutical powders were explored. Both experimental and numerical investigations were performed. For the experimental study, an X-ray Computed Microtomography system has also used to examine the internal failure patterns of the tablets produced using a compaction simulator. Finite element (FE) methods have also been used to analyse the powder compaction. The experimental and numerical studies have shown that the shear bands developed at the early stage of unloading appear to be responsible for the occurrence of capping. It has also been found that the capping patterns depend on the compact shape.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.301-305
• /
• 2005

This paper introduces a novel technique to detect and isolate the failures of multiple actuators connected to a system. Failure of actuator considered in this study could be any type of erroneous input that is different from commanded one. The interaction matrix technique allows the development of input-output equations that are only influenced by one target input. These input-output equations serve as an effective toot to monitor the integrity of each actuator regardless of the status of the other actuators. The method is capable of real-time actuator failure detection and isolation under any type of input excitation. The laboratory experiment using 8-bay NASA truss structure verifies the feasibility of the proposed method.

• 한국정보전자통신기술학회논문지
• /
• 제12권6호
• /
• pp.554-560
• /
• 2019

본 연구에서는 소프트웨어 신뢰성 분야에서 많이 사용하는 유한고장 NHPP Rayleigh 분포 모형과 NHPP Inverse Rayleigh 분포 모형을 소프트웨어 개발비용 모형에 적용한 후, 개발비용과 최적의 방출시간에 대한 속성을 비교, 분석하였다. 소프트웨어 개발비용의 속성을 분석하기 위하여 소프트웨어 고장시간 자료를 사용하였고, 모수추정은 최우추정법을 적용하였으며, 비선형 방정식은 이분법을 사용하여 계산하였다. 그 결과, Rayleigh 모형이 Inverse Rayleigh 모형보다 소프트웨어 개발비용이 비교적 적고, 소프트웨어 방출시점도 빨라서 상대적으로 우수한 모형임을 확인할 수 있었다. 본 연구를 통하여 기존 연구사례가 없는 Rayleigh 모형과 Inverse Rayleigh 모형의 개발비용 속성을 새롭게 분석하였으며, 더불어 소프트웨어 개발자들이 소프트웨어 신뢰도 향상 방법 및 개발비용의 속성을 탐색하는 데 필요한 기본지침으로 활용할 수 있을 것으로 기대한다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.217-223
• /
• 2006

When only partial information is available about equipment failures (installation date and amount, as well as failure and replacement rates), data on sufficiently large number of yearly populations of the components can be combined, and estimation of model parameters may be possible. The parametric models may then be used for forecasting of the system's short term future failure and for formulation of replacement strategies. We employ the Weibull distribution and show how we estimate its parameters from past failure data. Using Monte Carlo simulations, it is possible to assess confidence ranges of the forecasted component performance data.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.34-39
• /
• 1989

Recent trends in design standards development have encouraged the use of probabilistic limit sate design concepts. Reliability analysis adopted in those advanced countries have the potentials that they afford for symplifying the design Process arid placing it on a consistent reliability based for various construction materials. This study is proposed in the reliability analysis of plane frame structures using second-order moment method(Level-II they). Lind-Hasofer's minimum distance method is use in the derivation of an mathematical algorithm as well as an determination of Correlation cofficients, reliability index and total reliability index depending on the multiple failure modes. In addition. This study is employed as a practical tool for the approximate reliability analysis. Results of the numerincal analysis showed that the difference between the reliability index of the failure probability of the multiple failure modes and the total reliability index of the failure probability with the simultaneous failure modes deviated nearly 3∼10% depending on tile performance functions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.369-374
• /
• 2004

Web-based analysis programs for reliability assessment of machine tools were developed in this study. First, the reliability data analysis program was developed to search for failure rate using failure data and reliability test data of mechanical part. Second, failure mode analysis was developed through performance tests like circular movement test vibration test for machine tools. This analysis program shows correlation between failure mode and performance test result. Third, tool life was predicted by correlation between flank wear and cutting time, using the extended Taylor tool life equation in turning data and the equivalently converted equation in order to apply ball endmill data to Taylor tool life equation in milling data. All the information related to input and result data can be stored in theses programs.