• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권10호
• /
• pp.2844-2861
• /
• 2023

Internet is the most prevailing word being used nowadays. Over the years, people are becoming more dependent on the internet as it makes their job easier. This became a part of everyone's life as a means of communication in almost every area like financial transactions, education, and personal-health operations. A lot of data is being converted to digital and made online. Many researchers have proposed different authentication factors - biometric and/or non-biometric authentication factors - as the first line of defense to secure online data. Among all those factors, passwords and passphrases are being used by many users around the world. However, the usability of these factors is low. Also, the passwords are easily susceptible to brute force and dictionary attacks. This paper proposes the generation of a novel passcode from the hybrid authentication factor - sound. The proposed passcode is evaluated for its strength to resist brute-force and dictionary attacks using the Shannon entropy and Passcode (or password) entropy formulae. Also, the passcode is evaluated for its usability. The entropy value of the proposed is 658.2. This is higher than that of other authentication factors. Like, for a 6-digit pin - the entropy value was 13.2, 101.4 for Password with Passphrase combined with Keystroke dynamics and 193 for fingerprint, and 30 for voice biometrics. The proposed novel passcode is far much better than other authentication factors when compared with their corresponding strength and usability values.

• Structural Engineering and Mechanics
• /
• 제25권6호
• /
• pp.733-751
• /
• 2007

The metis element method (Hung 1978) has been applied to analyse free edge interlaminar stresses and delamination in composite laminates, which are subjected to extension and bending. The paper recalls Lekhnitskii's solution for generalized plane strain state of composite laminate and Wang's singular solution for determination of stress singularity order and of eigen coefficients $C_m$ for delamination problem. Then the formulae of metis displacement finite element in two-dimensional problem are established. Computation of the stress intensity factors and the energy release rates are presented in details. The energy release rate, G, is computed by Irwin's virtual crack technique using metis elements. Finally, results of interlaminar stresses, the three stress intensity factors and the energy release rates for delamination crack in composite laminates under extension and bending are illustrated and compared with the literature to demonstrate the efficiency of the present method.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.161-168
• /
• 2010

A series of fatigue tests have been performed on the non-load carrying fillet welded joints in order to quantitatively assess the fatigue characteristics due to the grindings and TIG(Tungsten Inert Gas) welding treatments. From the results of fatigue tests, it has been shown that the fatigue strengths at $2{\times}106$ load cycles were improved in the case of the grinding sand TIG welding treatments, and we could know that it is satisfying fatigue strength prescribed in fatigue design standard in general. Besides, from the results of fracture mechanics approaches, the geometric shape correction factors were the most dominant factors in the initial fatigue crack growth, but as the fatigue crack develops, the finite plate correction factor were became the most dominant factor, and the fatigue life on non-load carrying fillet welded joints could be relatively exactly estimated by using the relations between fatigue crack growth rate and stress intensity factor obtained from finite element analysis and existing proposed formulae.

• Transactions on Electrical and Electronic Materials
• /
• 제3권2호
• /
• pp.6-9
• /
• 2002

Indium tin oxide (ITO) films were deposited on unheated PET substrates by DC reactive magnetron sputtering of In-Sn (90-10 wt%) metallic alloy target. Electrical and optical properties of as-deposited films were systematically studied by control of the deposition parameters such as working pressure, DC power, and oxygen partial pressure. The figures of merit are important factors that summarize briefly the relationship between electrical and optical properties of transparent conducting films. The formulae of T/R$\_$sh/ and T$\^$10// R$\_$sh/ are expressed as a function of transmittance and sheet resistance. The best values of those figures of merit were approximately 38.6 and 8.95 ($\times$10$\^$-3/Ω$\^$-1/), respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.398-401
• /
• 2001

Indium tin oxide films were deposited on unheated PET substrates by DC reactive magnetron sputtering of In-Sn (90-10 wt%) metallic alloy target. Electrical and optical properties of as-deposited films were systematically studied by control of the deposition parameters such as working pressure, DC power, and oxygen partial pressure. The figures of merit are important factors that summarize briefly the relationship between electrical and optical properties of transparent conducting films. The formulae of $T/R_{sh}$ and $T^{10}/R_{sh}$ are expressed as a function of transmittance and sheet resistance. The best values of those figures of merit were approximately 38.6 and $8.95({\times}10^{-3}\Omega^{-1})$ respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.398-401
• /
• 2001

Indium tin oxide films were deposited on unheated PET substrates by DC reactive magnetron sputtering of In-Sn (90-10 wt%) metallic alloy target. Electrical and optical properties of as-deposited films were systematically studied by control of the deposition parameters such as working pressure, DC power, and oxygen partial pressure. The figures of merit are important factors that summarize briefly the relationship between electrical and optical properties of transparent conducting films. The formulae of T/R$\sub$sh/ and T$\^$10//R$\sub$sh/ are expressed as a function of transmittance and sheet resistance. The best values of those figures of merit were approximately 38.6 and 8.95 (x10$\^$-3/Ω$\^$-1/), respectively.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.72-78
• /
• 2010

In this paper the operation of a double-fed wound-rotor induction machine, coupled to a wind turbine, as a generator at sub-synchronous speeds is investigated. A novel approach is used in the analysis, namely, the rotor power flow approach. The conditions necessary for operating the machine as a double-fed induction generator (DFIG) are deduced. Formulae describing the factors affecting the range of sub-synchronous speeds within which generation occurs are deduced. The variations in the magnitude and phase angle of the voltage injected to the rotor circuit as the speed of the machine changes to achieve generation at the widest possible sub-synchronous speed range is presented. Also, the effect of the rotor parameters on the generation range is presented. The analysis proved that the generation range could increase from sub-synchronous to super-synchronous speeds, which increases the amount of energy captured by the wind energy conversion system (WECS) as result of utilizing the power available in the wind at low wind speeds.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.131-137
• /
• 2010

개구부의 여러가지 형상을 고려한 축하중에 대한 철근 콘크리트 벽체의 극한 강도를 연구하기 위하여 12개의 1/3축소벽체 실험을 수행하고 분석하였다. 벽체실험은 기존의 설계식을 수정하기 위하여 구성되었다. 유효좌굴길이가 고려된 실험결과를 이용하여 새로운 실험식이 산출되었다. 이 새로운 설계식은 기존의 실험설계식과 비교하여 제안한다.

• 조명전기설비학회논문지
• /
• 제24권11호
• /
• pp.23-29
• /
• 2010

The principal factor determining an optimum design method for cathodic protection is finding the protection current for preventing the corrosion of existing, already laid pipe. Some factors currently used to test designs include the sizes and lengths of pipes, soil resistivity, and the coating damage rate. We believe this method and current formulae are not optimum due to the uncertainty of determining the coating damage rate and the corrosion protection current's density. This paper analyzes the amount of protection current obtained by performing a temporary current test using data describing existing laid pipe. We then propose determining the corrosion protection current by using the temporary current test after modifying the formula. In addition, we suggest a way to choose optimized cathodic protection and the process of design by executing the design and taking account of such factors as a site condition of 34km-long non-protected water supply pipe lines (stages I and II) in ${\bigcirc}{\bigcirc}$ region, climate, interferences, and durability.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.32-41
• /
• 1994

선박해양공학연구센터 예인수조에서 시험되었던 선박 가운데 선형과 프로펠러가 모형과 실선이 동일하였던 36척에 대하여 모형선-실선상관해석을 수행하였다. 뚱뚱한 선형이 대부분임에도 불구하고, 타수조의 결과보다 약간 나은 일치를 보였다. 통계적 처리에 의하여 반류비 수정계수와 거칠기 수정계수에 대한 회귀식을 구하였고, Townsin의 거칠기계수를 적용한 경우의 저항수정계수에 대한 식을 도출하였다.