• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.115-116
• /
• 2012

The number of safety accidents of the construction industry is higher than other industries. To prevent the accidents from hazard factor, the employees are variously trained in avoiding an accident. Also many studies have been conducted to reduced the safety accident. But most of these studies are limited to institutional complements. This study proposes safety management improvement plan of safety management through case studies.

• 대한안전경영과학회지
• /
• 제8권2호
• /
• pp.39-49
• /
• 2006

Forklift achieves transportation of freight and continues loading and unloading work repeatedly long for hours in industry spot. Therefore, drivers feel tired make a mistake for wrong operation of vehicle caused by continuous work. These components are resulted in CTDs, some industrial accident. That is the forklift need to ergonomics access. So, in this paper, requirements of forklift user were abstracted using questionnaire, produced important design factor for pedal and lever using QFD(Quality Function Deployment), and then suggested ergonomic considerations for industrial accident prevention.

• 한국안전학회지
• /
• 제38권4호
• /
• pp.15-22
• /
• 2023

LPG-related accidents, which account for half of all gas accidents in Korea, have not shown any sign of decrease over the past decade, partially owing to the lack of effective safety improvement measures. The purpose of this study was to identify the effectiveness of improvement measures by analyzing the traits of accidents in terms of human factors, and to seek more effective accident prevention strategies. In this study, 108 accident cases were collected and analyzed in the aspect of accident characteristics such as violation type, human factors, and so on. The results showed that the work procedures of suppliers and engineers related to LPG accidents seemed to be similar in outward appearance; however, specific accident causes and unsafe behaviors were different. Particularly, type and target of violations were different, which could be visually confirmed by the Principal Component Analysis (PCA) and the Quantification Techniques (QT). Furthermore, for engineers, insufficient supervision was a major influencing factor. In conclusion, because the accident characteristics of suppliers and engineers are different, differentiated accident prevention strategies should be implemented, which was discussed in this study.

• 자동차안전학회지
• /
• 제6권1호
• /
• pp.22-26
• /
• 2014

Fatality of accidents on curved roads where rollover accidents are likely to take place was higher than that on straight roads. We ought to investigate factors affecting injury severity of occupant in a vehicle rollover accident. From January 2011 to December 2013, we collected data about rollover motor vehicle crash accident. We surveyed occupant's injury, vehicle type, safety devices, type of rollover accident and the number of turn in accident. Of the 132 subjects, 56.1% were males, 50.8% were drivers, 48.5% fastened seat belt, and air bag deployed in 12.1%. Among injuries sustained head, chest and abdomen were major sites of severe injury(Abbreviated injury scale>2). Seat belt use, rollover type, and the number of 1/4 turn were found to have significant positive correlations with Injury Severity Score. The regression analysis herein found significance in safety belt use and the number of 1/4 turn. Seat belt use was a significant factor affecting injury severe of occupant in rollover accident.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.440-443
• /
• 2003

Recently, with the rapid growth of industry, environmental condition became worse. With the mix of the various contaminants, such as, salts, dust and industrial pollutants, synergy effect could be happened. So, many researches have been focused on the issue. The cause of natural accident could be classified as, lightning, rainstorm and contamination. However, the accident by contamination influences on the larger area than that by lightning, and, in the case of rapid contamination, it takes a shorter time than rainstorm. The salt contaminant is one of the most representative pollutants, and known as the main source of the accident by contamination. So, in this investigation we make a research on the prediction of contamination degree through the relationship analysis between the climatic factor and ESDD.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.1-8
• /
• 2009

The studies on semiconductor industrial accident in korea have been focused on the frequencies of each type of safety management employee, characteristics, cause and unsafe conditions, acts and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a wel-developed process and systematic guidelines for efficient safety management. Therefore, there were a few studies based on comprehensive survey in terms of the shape type of safe management. The questionnaire survey carried out for the 284 workers who were responsible for safety management in center with cooperation companies in semiconductor industry factor analysis showed that there were three factors of safety management. First, investment and operation and management for accident prevention, Second, unsafe act and condition, safety management Third, general human error and behavior. The industries of respondents were correlative with three groups. Three groups showed statistically significant differences on the number of cases. Actually, the group with the larger investment and the more unsafe cause, human error of accidents prevention had a smaller causes of accident cases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.27-28
• /
• 2022

There is a limit to preventing various types of safety accidents in advance at construction sites. Even for buildings of the same total floor area, it is expected that the more complex the building shape or the higher the number of floors, the higher the probability of a safety accident. Therefore, it is necessary to analyze the effect of the shape of a building on safety accidents using safety accident data generated during actual construction. The purpose of this study is to analyze the impact of building shape on safety accidents. As a result, the R2 value of shape factor and safety accident was 0.901, and the R2 value of construction difficulty and safety accident was 0.944. In the future, the results of this study will be used as basic data for improving safety management related systems.

• 한국임상수의학회지
• /
• 제17권1호
• /
• pp.88-92
• /
• 2000

In Everland Zoological Gardens, the mortality by extrinsic cause in non-human primates during 1976∼1999 were retrospectively analyzed based on the clinical charts and/or autopsy reports. The number of deaths from extrinsic factor was 61 among a total of 161 monkeys which were died during that period. Among 61 monkeys of death from extrinsic factor, the number at a detailed cause were as follows: strangulation, 17(27.87%); accident fall, 15(24.59%); suffocation, 13(21.31%); drowning, 7(11.48%); death from pressure, 2(3.28%); collision, 2(3.28%); sunstroke, 1(64%); starvation, 1(1.64%); freezing to death, 1(1.64%); contusion, 1(1.64%). The number of deaths from extrinsic factor was 39 among a total of 81 squirrel monkeys which were died during that period. Among 39 squirrel monkeys of death from extrinsic factor, the number at a detailed cause were as follows; suffocation, 11(28.21%); accident fall, 8(20.51%); strangulation, 7(17.95%); drowning, 7(17.95%); death from pressure, 2(5.13%); starvation, 1(2.56%); collision, 1(2.56%). The number of deaths from extrinsic factor was 14 among a total of 50 Japanese macaque died during that period. Among 14 Japanese macaque from extrinsic factor, the number at a detailed cause were as follows; strangulation, 7(50.55%); accident fall, 6(42.85%); suffocation, 1(7.14%). It was considered that far facilities, adequate space and suitable indoor temperature are needed for the prevention of deaths of extrinsic cause at the monkey raising in zoological gardens or research center.

• 대한안전경영과학회지
• /
• 제8권6호
• /
• pp.1-11
• /
• 2006

Since Zohar(1980) emphasized the influence of social, organizational, and psychological context in occupational safety and health study, the research in this area tends to be emphasizing the influences of personal and physical interaction. With this research trend, this paper is to examine the relationship between safety climate model and safety accident, and the interactional or moderating effect of personal and physical factor on the above relationship. Author conducted a survey to 292 manufacturing workers in construction industry, and the chief results of statistical analysis are as follows 1) management involvement, safety education, precaution activities, and safety system have negative effects on safety accident, 2) a-type personality has interactional effect on safety accident with communication, precaution activities, and safety system. 3) physical job load has interactional effect on safety accident with precaution activities, and safety system.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.151-160
• /
• 2006

Since Zohar(1980) emphasized the influence of social, organizational, and psychological context in occupational safety and health study, the research in this area tends to be emphasizing the influences of personal and physical interaction. With this research trend, this paper is to examine the relationship between safety climate model and safety accident, and the interactional or moderating effect of personal and physical factor on the above relationship. Author conducted a survey to 292 manufacturing workers in construction industry, and the chief results of statistical analysis are as follows : 1) management involvement, safety education, precaution activities, and safety system have negative effects on safety accident, 2) a-type personality has interactional effect on safety accident with communication, precaution activities, and safety system. 3) physical job load has interactional effect on safety accident with precaution activities, and safety system.