• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.591-605
• /
• 2019

Investigations on seismic performance of eccentrically braced frames equipped with dual vertical links have received little attention. Therefore, the main goal of this paper is to describe design steps for such frames and evaluate nonlinear performance of this system according to the reliability analysis. In this study, four and eight story frame structures are analyzed and the response modification factors for different intensity and damage levels are derived in a matrix form based on a new approach. According to the obtained results, the system has high ductility and acceptable seismic performance. Moreover, it is concluded that using response modification factor equal to 8 in the design of system provides desirable seismic reliability under the design and maximum probable hazard levels. Due to desirable performance and significant advantages of the dual vertical links, this system can be used as a main lateral load bearing system, in addition to its application for rehabilitation of damaged structures.

• 한국주조공학회지
• /
• 제15권2호
• /
• pp.138-145
• /
• 1995

The mechanical properties of $Al/Al_2O_3$ composites have been investigated in relation with manufacturing factors such as applied pressure of casting and binder amount of preform. It was found that tensile strength increases with an increase of applied pressure, but decreases with binder amount. Increase of tensile strength is attributable to refinement of microstructure, improvement of intefacial bonding between $Al_2O_3$ short fiber and matrix, decrease of porosity in the matrix. Due to the high thermal stability of alumina short fiber, tensile strength of composites at $150^{\circ}C$ was superior to matrix alloy at room temperature. To evaluate the strength of composites, modified Kelly-Tyson's equation was introduced. Manufacturing factor M was obtained calculating from experimental data. M values were increased with applied pressure, but decreased with binder amount. The initiation of microcrack appeared to be at interface and reinforcement colony. Amount of micro-dimple was increased with applied pressure, and interfacial debonding phenomenon was remarkable with an increase of binder amount.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.197-203
• /
• 2001

A fusion protein, consisting of human epidermal growth factor as a recognition domain and human angiogenin as a toxin domain, can be used as a targeted therapeutic against breast cancer cells among others. The fusion protein was expressed as inclusion body in recombinant E. coli, and when the conventional, solution-phase refolding process was used the refolding yield was very low due to severe aggregation, probably due to the opposite surface charge due to vastly different pI values of each domain. Solid-phase refolding process exploiting ionic interactions between the solid matrix and the protein was tried, but the ionic binding yield was very low regardless of the resins and pH conditions used. To provide higher affinity toward the solid matrix, six lysine residues were tagged to the N -terminus of the hEGF domain When the cation exchange resins such as heparin- or CM-Sepharose were used as the matrix, the adsorption capacity increased 2.5-3 times and the subsequent refolding yield increased nearly IS times compared to the conventional process.

• Carbon letters
• /
• 제20권
• /
• pp.39-46
• /
• 2016

In this work, the effects of maleic anhydride (MA) content on mechanical properties of chopped carbon fibers (CFs)-reinforced MA-grafted-polypropylene (MAPP) matrix composites. A direct oxyfluorination on CF surfaces was applied to increase the interfacial strength between the CFs and MAPP matrix. The mechanical properties of the CFs/MAPP composites are likely to be different in terms of MA content. Surface characteristics were observed by scanning electron microscope, Fourier transform infrared spectroscopy, and single fiber contact angle method. The mechanical properties of the composites were also measured by a critical stress intensity factor (K_IC). From the K_IC test results, the K_IC values were increased to a maximum value of 3.4 MPa with the 0.1 % of MA in the PP, and then decreased with higher MA content.

• 한국소음진동공학회논문집
• /
• 제13권7호
• /
• pp.555-561
• /
• 2003

An iterative modal analysis approach is developed to determine the effect of transverse open cracks on the dynamic behavior of simply supported Euler-Bernoulli beams with the moving masses. The influences of the velocities of moving masses, the distance between the moving masses and a crack have been studied on the dynamic behavior of a simply supported beam system by numerical method. The Presence of crack results In large deflection of beam. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments i.e. the crack is modelled as a rotational spring. This flexibility matrix defines the relationship between the displacements and forces across the crack section and is derived by applying fundamental fracture mechanics theory. Totally, as the velocity of the moving masses and the distance between the moving masses are increased, the mid-span deflection of simply supported beam with the crack is decreased.

• 산업기술연구
• /
• 제19권
• /
• pp.75-79
• /
• 1999

Rotary bending fatigue tests were performed to investigate the effects of 2-phase matrix structure on fatigue limit with prepared specimens in high strength ductile irons. Two types of the specimens with different microstructures have been used. Series A has sorbite and series B has bainite. Fatigue limits of both specimens are improved comparing with as cast specimen. The fatigue limit is higher in series B than in series A. The reason why the fatigue limit of series A shows inferiority to that of series B is due to the transition of micro fatigue cracks to mesocrack occurs very rapidly, so increased stress intensity factor drives the fatigue crack growth. The higher fatigue limit of series B which has bainite is caused by the ${\gamma}$ layer contained in microstructure impede the rapid growth of micro fatigue crack to mesocrack and ${\alpha}$ layer around graphite has the higher capacity for the absorption of plastic deformation energy than sorbite.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권3호
• /
• pp.1049-1052
• /
• 2012

The purpose of this study was to evaluate expression and prognostic value of matrix metalloproteinase-7 (MMP-7) in colorectal cancer (CRC) patients. CRC tissues and corresponding distal normal mucosa tissues of 118 CRC patients were assessed by immunohistochemistry. Correlations between MMP-7 expression, patients' clinic pathological features, and overall survival rate were analyzed. We found that positive expression of MMP-7 in CRC tissues was significantly higher than that in distal normal mucosa (61.0% vs. 39.8%, p =0.001). Poor histological differentiation, advanced clinical stage and lymph node metastasis were significantly correlated with MMP-7 expression in CRC. The overall survival rate was significantly higher in the MMP-7 negative group than the positive group (Log-rank test= 9.957, p= 0.002). MMP-7 appeared as a significant independent prognostic factor through multivariate survival analysis. Collectively, we found MMP-7 expression to be correlated with progression and metastasis of CRC and thus could be used as a predictive marker of prognosis in CRC patients.

• BMB Reports
• /
• 제43권1호
• /
• pp.62-68
• /
• 2010

Matrix Metalloproteinases (MMPs) are a family of zinc-endopeptidases which can degrade extracellular matrix (ECM) components and play important roles in a variety of biological and pathological processes. 6,6'-bieckol isolated and characterized from an edible marine brown alga Ecklonia cava (EC), according to the comprehensive spectral analysis of MS and NMR data. Here the influence of 6,6'-bieckol on expressions of MMPs was examined by zymography and western blot analysis via human fibrosarcoma cell line (HT1080). It is shown that 6,6'-bieckol significantly down regulated the expressions of MMP-2 and -9 in dose-dependent manner. The influence of 6,6'-bieckol on the cell viability and cell behavior of HT1080 cells were also investigated, our dates shown that it suppressed the migration and 3D culture in HT1080 cells. Meanwhile, we explored several signal pathways which may contribute to this process, and found the suppressing of MMPs expressions in HT1080 cells might be due to the suppression of NF-${\kappa}B$ signal pathway.

• Journal of Applied Biological Chemistry
• /
• 제62권4호
• /
• pp.367-374
• /
• 2019

Euphorbia humifusa Willd (EuH), called Ttang-Bin-Dae in Korea, is a traditional medicinal plant widely used for its anti-inflammatory and antiviral activity. Ethyl acetate (EA) extracts of EuH (EA/EuH) inhibit invasion and metastasis by inhibiting tumor necrosis factor TNFá-induced matrix metalloproteinases (MMP)-9 expression in human breast cancer cells. However, the bioactive components of EA/EuH mediating the inhibition of MMP-9 expression have not been identified. In the present study, three bioactive constituents of EA/EuH were isolated using high-performance liquid chromatography. Nuclear magnetic resonance spectroscopy revealed isoquercetin, avicularin, and astragalin as the bioactive compounds responsible for preventing TNFα-induced MMP-9 mRNA expression in breast cancer cells. These findings suggest that isoquercetin, avicularin, and astragalin could be used as valuable anti-metastatic agents against metastatic cancers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1085-1090
• /
• 2003

An iterative modal analysis approach is developed to determine the effect of transverse open cracks on the dynamic behavior of simply supported Euler-Bernoulli beams with the moving masses. The influences of the velocities of moving masses, the distance between the moving masses and a crack have been studied on the dynamic behavior or a simply supported beam system by numerical method. no presence or crack results in large deflection of beam. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments i.e. the crack is modelled as a rotational spring. This flexibility matrix defines the relationship between the displacements and forces across the crack section and is derived by applying fundamental fracture mechanics theory. Totally, as the velocity of the moving masses and the distance between the moving masses are increased, the mid-span deflection of simply supported beam with the crack is decreased.