• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.79-93
• /
• 2002

크로스도킹이란 물류와 분배의 개념으로서 창고나 분배 센터에서 물품이 재고로 남겨짐이 없이 곧바로 하역 창구에서 적재 창구로 이동되어지는 것을 말한다 창고시설 이나 운영 조건이나 운영 전략에 의해서 다양한 크로스도킹 모델이 생성될 수 있다. 본 연구에서 고려되어지는 크로스도킹 모델은 하나의 독립된 하역 창구와 독립된 적재 창구를 가정하고 있다. 또한 하역 트럭에 적재되어 있는 물품이나 적재 트럭에 실려질 물품의 수와 종류는 사전에 알려져 있다는 것을 가정한다. 또한 고려되어진 창고나 분배창구는 단지 하나의 하역 창구와 하나의 적재 창구를 가지고 있다고 가정된다. 본 연구의 목적은 고려되어진 크로스도킹 시스템의 총 운영 시간을 최소화하기 위한 하역 트럭과 적재 트럭의 일정 계획을 찾는데 있다.

• 디지털산업정보학회논문지
• /
• 제17권1호
• /
• pp.35-44
• /
• 2021

With the development of information technology, the cybersecurity threat continues as digital-related technologies are applied to the instrumentation and control system of nuclear power plants. The malfunction of the instrumentation and control system can cause economic damage due to shutdown, and furthermore, it can lead to national disasters such as radioactive emissions, so countering cybersecurity threats is an important issue. In general, the study of cybersecurity in instrumentation and control systems is concentrated on safety systems, and diverse protection systems perform protection and reactor shutdown functions, leading to reactor shutdown or, in the worst case, non-stop situations. To accurately analyze cyber threats in the diverse protection system, its linked facilities should be analyzed together. Risk analysis should be conducted by analyzing the potential impact of inter-facility cyberattacks on related facilities and the impact of cybersecurity on each configuration module of the diverse protection system. In this paper, we analyze the linkage of the diverse protection system and discuss the cybersecurity linkage threat by analyzing the availability of equipment, the cyber threat impact of the linked equipment, and the configuration module's cybersecurity vulnerability.

• Journal of Radiation Protection and Research
• /
• 제39권1호
• /
• pp.7-13
• /
• 2014

인광석 취급 산업체에서는 천연방사성물질(NORM)을 함유한 물질을 다량으로 취급하고 있어, 종사자들은 각 공정에서 발생하는 공기 중 입자의 흡입에 의해 내부피폭을 받을 수 있다. 흡입에 의한 내부피폭 방사선량은 입자의 특성에 의해 크게 좌우된다. 따라서 본 연구에서는 국내 최대 인광석 취급 산업체에서 공기 중 부유 입자의 크기 분포 및 농도, 입자의 모양 및 밀도, 그리고 방사능 농도를 평가 하였다. 다단계입자채집기를 이용하여 공기 중 입자를 채집하고 입자의 크기분포, 농도, 그리고 모양을 분석하였다. 입자의 공기역학적 직경은 0.03-100 ${\mu}m$까지 광범위하게 분포하였으며, 입자크기가 4.7-5.8 ${\mu}m$(기하학적 평균직경 = 5.22 ${\mu}m$) 혹은 5.8-9.0 ${\mu}m$(기하학적 평균직경 = 7.22 ${\mu}m$)인 범위에서 공기 중 입자의 농도가 최댓값을 나타냈다. 공기 중 부유입자의 농도는 공정에 따라 최대 수백 배 이상 차이를 보였으며, 중장비 작업이 이루어지는 창고에서 높은 농도를 보였다. 반면에 인산석고 적치장에서는 입자의 부유방지를 위한 덮개 및 살수 그리고 비료공장 제어실에서는 환기시설을 갖추고 있어 상대적으로 입자의 공기 중 농도가 낮게 나타났다. 입자의 모양은 모든 측정 장소에서 구형에 가깝게 나타났으므로, 인광석 취급 시설에서 발생하는 입자의 모양인자 값을 1로 정하였다. 각 공정에서 시료를 채집하여 입자의 밀도를 분석하였다. 인광석의 밀도는 약 3.1-3.4 $gcm^{-3}$, 염화칼륨의 밀도는 약 2.7 $gcm^{-3}$, 공정 부산물인 인산석고의 밀도는 약 2.1-2.6 $gcm^{-3}$, 최종제품인 복합비료의 밀도는 약 1.7 $gcm^{-3}$으로 나타났다. 감마분석기를 이용하여 원료물질, 공정부산물, 생산제품 내 $^{226}Ra$, $^{228}Ra$, $^{40}K$ 핵종의 방사능 농도를 측정하였다. 인광석에는 주로 우라늄계열 핵종을 많이 함유하고 있었으며, 그 농도는 원료 산지에 따라 94-866 $Bqkg^{-1}$ 정도였다. 인광석 내에 존재하는 우라늄계열 핵종 중 우라늄은 생산품인 인산 혹은 비료에 농축되었으며, 라듐은 부산물인 인산석고에 농축되었다. 최종제품인 비료의 경우에는 $^{226}Ra$과 $^{228}Ra$이 거의 존재하지 않았으나, 제품생산을 위해 첨가한 염화칼륨에 의해 $^{40}K$의 방사능 농도가 5,000 $Bqkg^{-1}$로 높게 나타났다. 본 연구에서 생산한 인광석 취급 산업체의 입자의 특성 평가 자료는 인산염 취급 산업체 종사자에 대한 방사선학적 안전성 평가에 이용될 수 있을 것이며, 최근 시행된 생활주변방사선 안전관리법에 따른 생활주변방사선 안전관리의 체계를 수립하기 위한 자료로 활용될 수 있을 것이다.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.9-18
• /
• 2009

This paper proposes a Ubiquitous Henhouse Monitoring System (UHMS) that can not only monitor henhouse's conditions and raising environments, but also control the henhouse remotely by using sensor network technology. The system consists of three layers. The physical layer connects sensors with facilities. The middleware layer processes and manages data collected from the physical layer. And the application layer provides the user with the user requested services. The system provides a real-time monitoring service, a facility controlling service, an expert service, a consumer safety service, and a mobile message service via interacting with components of each layer. Finally, a henhouse model is defined and the relevant system components and the application GUIs are implemented.

• 한국식생활문화학회지
• /
• 제16권2호
• /
• pp.128-136
• /
• 2001

The purpose of this study was to assess the needs of education program and to analyze importance of education courses for school food service cooks. The questionnaires were developed by reviewing literatures on education programs for cooks and by interviewing with cooks who are working in school food service. A total of 150 questionnaires were surveyed at Kyonggi University and 90 of them were analyzed. The cooks in school food service wanted to take continuing education program about cooking skills and school food service operation skills. They wanted to take a culinary courses for 10 days and they wanted to take a food service operation courses for a week. The school food service cooks emphasized on courses of job analysis, laws and regulation, food sanitation, standard recipe, safety, equipment, and facility and layout. And they thought not only Korean food but also western food, Chinese food and Japanese food are important.

• 상하수도학회지
• /
• 제28권6호
• /
• pp.669-679
• /
• 2014

3D-based BIM(Building Information Modeling) technologies can be utilized effectively as a means of systematic management of facility information for safety assurance and effective maintenance of waterworks facilities. In this study, BIM models of water treatment facilities that can be used as basic data for BIM-based maintenance of waterworks facilities were developed. Information exchange and generality of the developed BIM models were evaluated by conducting interoperability analysis of IFC(Industry Foundation Classes) conversion models. In addition, the application of COBie(Construction Operations Building information exchange) was recommended as an effective countermeasure to deal with technical limitation regarding exchange and utilization of facilities-related information through current IFC models. The results of this study can contribute to the development of BIM-based maintenance system for waterworks facilities.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.126-127
• /
• 2018

Rebar work is important in terms of cost and process of reinforced concrete construction along with formwork and concrete construction, and the quality of reinforced concrete construction has a great influence on the safety and durability of the structure. Therefore it is important to thoroughly inspect the steel reinforcement after casting the concrete because it is difficult to confirm the actual condition of the reinforcement. The purpose of this study is to develop an augmented reality system to visualize the records of bar placing work, which is increasingly utilized in the construction field. In order to improve maintenance of reinforced concrete, this study suggests a plan to effectively manage the drawing information including the structural drawing, the placing drawing, and the photographed image at the construction and inspection stage, and develop a system that utilizes augmented reality technology that can display the state of the inside of a concrete structure by superimposing it on actual environment.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.26-43
• /
• 2002

This study was conducted to identify the differences in service quality between Incheon and Kimpo international airports and critical factors influencing satisfaction of their customers. According to the results of the study, all service quality factors of Incheon international airport except the service factor of geographical location were better than those of Kimpo international airport. However, all service quality factors of the two airports were evaluated inferior to those of American, western European and Japanese international airports. In addition the service quality factors such as response, safety, airport facility and geographical location were found as critical factors influencing satisfaction of the airport customers. The service quality factor of geographical location of Incheon international airport was measured much inferior comparing with other service quality factors. Thus, the results of this study suggest that the Korean government deliberate and benchmark the international airports of western Europe and the USA in determining the geographical location when planning new international airports.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.154-163
• /
• 2002

This study tries to analyze how TPM works in domestic manufacturing industry by estimating two-stage model. First stage tests the effects of five TPM-factor variables (TFV : (1) Small group activity & Autonomous maintenance, (2) Education & Training, (3) Planned maintenance, (4) improving effectiveness of each piece of facility (5) Safety & Environment) to two TPM-performance variables. Second stage tests how two TPVs affect the industry's productivity level. By combining these two stages, this study uses a model to explain how TPM, represented by TFVs, works to improve productivity via TPVs. Multivariate and univariate regression and correlation analyses were peformed. It is shown that five TFVs works in two different ways to improve the industry's productivity level. In the second stage, overall equipment effectiveness has relatively more significant effects to the productivity level.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.19-20
• /
• 2015

Since 2013, Seoul Metropolitan Government (SMG) has introduced big data initiatively in administration and put into practices in transportation, safety, welfare in order to overcome limited resources and conflicting interests. For establishing a new midnight bus service, SMG prepared optimized midnight bus routes by analyzing big data from mobile phone Call Data Record (CDR) through collaboration with a telecommunication company. Despite of limited budget and resources, newly identified routes can cover over 42% of the citizen with 9 routes and less than 1% of buses compare with day time operation. In addition to solve transportation problem, SMG utilizes big data to resolve location selection problem for choosing new facility locations such as life double cropping centers and senior citizen leisure centers. As results, SMG demonstrates big data as a good tool to make policies and to build smarter city by overcome space-time limitation of resources, mediation of conflicts, and maximizes benefit of the citizen.