• The Research Journal of the Costume Culture
• /
• v.6 no.4
• /
• pp.149-161
• /
• 1998

The purpose of this study was to present the effective activation of apparel CAD system and for this, the investigation of actual condition of CAD using companies and comparative inspection with the advanced study were carefully considered. The results were as follows : 1. The investigation result of the system using enterprises is that the direct effect from the operation of the CAD system after its introduction was the promptness, ad the indirect effect of it was the growth of operation level and operating reliance. 2. The problem originated from the system was the uncertainty of employer effectiveness and the financing source for it when introduced, and the lack of consciousness of it when operated. 3. The using level in pattern manufacturing function was lower than that in grading and marking. Therefore, as the full automation in CAD system is a part of CIM construction and the direction to which apparel companies should go, a firmly connected system between management & the persons in charge in apparel companies, facility supplying companies, universities & other educational institutes, and the Government should be duly constructed first of all n order to achieve this aim.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.328-333
• /
• 2007

Traditional maintenance planning is based on a constant maintenance interval for equipment life. In order to consider economic aspect for tm based preventive maintenance, preventive maintenance is desirable to be scheduled by RCM(Reliability-Centered Maintenance) evaluation. The main objective of RCM is to reduce the maintenance cost, by focusing on the most important functions of the system and avoiding or removing maintenance actions that are not strictly necessary. So, Markov state model is utilized considering stochastic state in RCM In this paper, a Markov state model much can be used for scheduling and optimization of maintenance is presented. The deterioration process of system condition is modeled by the stepwise Markov model in detail. Also, because the system is not continuously monitored, the inspection is considered. In case study, simulation results about RCM will be shown using the real historical data of combustion turbine generating unit in Korean power systems.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.126-127
• /
• 2018

Rebar work is important in terms of cost and process of reinforced concrete construction along with formwork and concrete construction, and the quality of reinforced concrete construction has a great influence on the safety and durability of the structure. Therefore it is important to thoroughly inspect the steel reinforcement after casting the concrete because it is difficult to confirm the actual condition of the reinforcement. The purpose of this study is to develop an augmented reality system to visualize the records of bar placing work, which is increasingly utilized in the construction field. In order to improve maintenance of reinforced concrete, this study suggests a plan to effectively manage the drawing information including the structural drawing, the placing drawing, and the photographed image at the construction and inspection stage, and develop a system that utilizes augmented reality technology that can display the state of the inside of a concrete structure by superimposing it on actual environment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.1-11
• /
• 2021

As the aging of large domestic SOC facilities accelerates, facility maintenance is also changing from safety evaluation based on the current condition to performance-oriented preventive and preemptive maintenance based on the prediction of the level of future obsolescence. In particular, in the case of bridges, class 1 and 2 bridges are systematically managed along with many studies, but for small and medium-sized class 3 bridges there is no collection and utilization of historical data presenting performance degradation during their service life. Therefore, in this study, 3D model-based demonstration DB system was designed and developed to intuitively check the damage change rate at the damage location by registering the maintenance history by life cycle for each member's exterior damage in the 3D bridge object and to enable API-based comprehensive performance evaluation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.5
• /
• pp.17-26
• /
• 2022

In this study, in order to establish the criteria for evaluation of importance by the type of facility specialized for agricultural reservoirs, an expert group consisting of a total of 167 members who were in management, or specialized in the fields of design, research, and diagnosis were organized, and the importance for facilities was set with application of the AHP technique. The importance of dam body, spillway, and intake structure composing a reservoir were set at 59%, 24%, and 17%, and the importance of dam crest, upstream slope, and downstream slope constituting a dam body was set at 32%, 31%, and 37%, respectively. In addition, the importance of approach channel, regulated channel, chute channel, and stilling basin consisting a spillway was set at 15%, 44%, 26%, and 15%, and the importance of inclined conduit and outlet conduit consisting an intake structure was set at 35% and 65%, respectively. The safety grade of the reservoirs evaluated by applying the newly presented importance values in this study showed the rearrangement of the grades with a change of 11% compared to the previous grades. In this way, the newly established criteria are expected to be utilized as basic data with strategic importance in reservoir safety management and disaster prevention as well as the operation of systems in the future.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.583-597
• /
• 2014

Fire caused by heater has various causes as many as the types of heater. also, lots of damage of human life and property loss are caused, since annually continuous fire accident by heater in traditional market is frequently occurring. There are not many cases of fire due to heater in most of residential facilities such as general house, apartments, etc., because they are supplied with heating boiler, however the restaurant, store and office of the market, sports center, factory, workplace, etc. still use heater, e.g. oilstove, electric heater, etc., so that they are exposed to fire hazard. Also, when investigating the number of fire due to heater, it was analyzed to occur in order of home boiler, charcoal stove, oilstove, gas heater/stove, electric stove/heater, the number of fire per human life damage was analyzed in order of gas heater/stove, oil heater/stove, electric heater/stove, briquette/coal heater. Also, gas and oil related heater were analyzed to have low frequency, however, with high fire intensity. Therefore, this research aimed at considering more scientific fire inspection and identification approach by reenacting and reviewing fire outbreak possibility caused by combustibles' contact and conductivity under the normal condition and abnormal condition in respect of ignition hazard, i.e. minimum ignition temperature, carbonization degree and heat flux along with it, due to oilstove and electric stove, which are still frequently used in public use facility, traditional market, and, of which actual fire occurrence is the most frequent. As the result of reenact test, ignition hazard appeared very small, as long as enough heat storage condition is not made in both test objects(oilstove/electric stove), however carbonization condition was analyzed to be proceeded per each part respectively. Eventually, transition to fire is the ignition due to heat storage, so that it was analyzed to ignite when minimum heat storage temperature condition of fire place is over $500^{\circ}C$. Particularly, in case of quartz pipe, the heating element of electric stove, it is rapidly heated over the temperature of $600^{\circ}C$ within the shortest time(10sec), so that the heat flux of this appears 6.26kW/m2, which was analyzed to result in damage of thermal PVC cable and second-degree burn in human body. Also, the researcher recognized that the temperature change along with Geometric View Factor and Fire Load, which display decrease of heat, are also important variables to be considered, along with distance change besides temperature condition. Therefore, the researcher considers that a manual of careful fire inspection and identification on this is necessary, also, expects that scientific and rational efforts of this research can contribute to establish manual composition and theoretical basis on henceforth fire inspection and identification.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.175-181
• /
• 2022

The condition of infrastructure deteriorates as the service life increases. Since most infrastructure in South Korea were intensively built during the period of economic growth, the proportion of outdated infrastructure is rapidly increasing now. Aging of such infrastructure can lead to safety accidents and even human casualties. To prevent these issues in advance, periodic and accurate inspection is essential. For this reason, the need for research to detect various types of damage using computer vision and deep learning is increasingly required in the field of remotely controlled or autonomous inspection. To this end, this study proposed a neural network structure that can detect concrete damage by classifying it into three types. In particular, the proposed neural network can detect them more accurately through a hierarchical learning technique. This neural network was trained with 2,026 damage images and tested with 508 damage images. As a result, we completed an algorithm with average mean intersection over union of 67.04% and F1 score of 52.65%. It is expected that the proposed damage detection algorithm could apply to accurate facility condition diagnosis in the near future.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.254-265
• /
• 2021

Purpose: Inspection and diagnosis on the performance and safety through domestic port facilities have been conducted for over 20 years. However, the long-term development strategies and directions for facility renewal and performance improvement using the diagnosis history and results are not working in realistically. In particular, in the case of port structures with a long service life, there are many problems in terms of safety and functionality due to increasing of the large-sized ships, of port use frequency, and the effects of natural disasters due to climate change. Method: In this study, the maintenance history data of the gravity type quay in element level were collected, defined as big data, and a predictive approximation model was derived to estimate the pattern of deterioration and aging of the facility of project level based on the data. In particular, we compared and proposed models suitable for the use of big data by examining the validity of the state-based deterioration pattern and deterioration approximation model generated through machine learning algorithms of GP and SGP techniques. Result: As a result of reviewing the suitability of the proposed technique, it was considered that the RMSE and R² in GP technique were 0.9854 and 0.0721, and the SGP technique was 0.7246 and 0.2518. Conclusion: This research through machine learning techniques is expected to play an important role in decision-making on investment in port facilities in the future if port facility data collection is continuously performed in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.200-210
• /
• 2020

The maintenance of educational facilities was assembled in 12 project classifications of the Educational Improvement Program. The priorities were decided by the evaluation scores derived from the condition investigation, and maintenance works were budgeted in the order of priorities. These priorities were a schedule for conducting maintenance and an important criterion for obtaining a construction order. Several restrictions in the condition investigation exist, which derives budgets and conducts maintenance separately based on the priorities. An educational facility manager has a restriction in quantity take-off, which results in an incorrect budget. Discomfort would occur in an educational environment, and a period of infringing safety would increase. This study proposes applying a BIM in the condition investigation and the planning framework for work-type packaging. A BIM supports a budget calculation and derives evaluation scores by linking a repair and an inspection result. The work-type packaging algorithm divides a budget allocation range and derives the result of a grouped work-types applied in an equivalent space and element. As a result of applying cases, it could shorten the duration by approximately 37.4%. Its usability in selecting a grouped work-type was evaluated through an assessment with workers.

• Journal of the Korean Society of School Health
• /
• v.16 no.2
• /
• pp.13-23
• /
• 2003

To provide data necessary for effectively applying the HACCP system by understanding the current application condition of HACCP system and satisfaction level of the dietician in elementary schools, a mail-in survey was conducted on dieticians serving for 227 elementary schools applying HACCP system in Kyungsangbuk-Do since November 1, 2001 to December 20, 2001. 83.5% of the subjected schools were conducting more than 50% of HACCP cooking process management, and the level of cooking process management displayed significant relevance according to the number of dieticians serving the school meals. The area that was not well conducted in the field of HACCP system was proven to be water examination(94.0%), inspection on self-sanitation of cooks prior to cooking(90.6%), and maintenance of dry kitchen floor(l4.8%). The reason why the above areas are not well conducted was because of lack of time due to over workloads. Subjective dieticians had pointed out improvement of sanitary concept(58.1%) and improvement of self-sanitation (28.8%) as benefits of applying HACCP. 21.2% of the subjective dieticians were satisfied with application HACCP and 35.2% were dissatisfied with applying HACCP. In case of which the duration of applying the HACCP was longer than one year and in case of higher rate of HACCP cooking process management and longer work experience of the dieticians, the level of satisfaction was proven to be significantly higher. The most difficult things to follow in important management categories according to the features of dietitian work and work experience were food distribution of CCP7 step and maintenance of optimum temperature(70.7%). Subjective dieticians had pointed out insufficient facility or environment and lack of inspection equipments in order regarding problems of applying HACCP. Also in the level of necessity of improvement categories in applying HACCP, dieticians had replied that facility and equipment improvement was mostly needed. Due to the induction of HACCP system in school meals, comparatively well cooking process management is being conducted, and I believe it could contribute in securing safety and quality improvement of school meal by improving the sanitation concept of the dieticians. However, the satisfaction level of dieticians are rather low and there are many difficulties in maintaining optimum temperature in the process of food distribution and transportation process. Also, lack of facilities and environment, lack of inspection equipments and etc are pointed out as problems of inducing HACCP. Thus, to settle HACCP system, it is believed that brave investment must be preceded.