• Membrane and Water Treatment
• /
• v.2 no.4
• /
• pp.207-223
• /
• 2011

Supported Liquid Membranes (SLMs) have been widely studied as feasible alternative to traditional processes for separation and purification of various chemicals both from aqueous and organic matrices. This technique offers various advantages like active transport, possibility to use expensive extractants, high selectivity, low energy requirements and minimization of chemical additives. SLMs are not yet used at large scale in industrial applications, because of the low stability. In the present paper, after a brief overview of the state of the art of SLM technology the facilitated transport mechanisms of SLM based separation is described, also introducing the small and the big carrousel models, which are employed for transport modeling. The main operating parameters (selectivity, flux and permeability) are introduced. The problems related to system stabilization are also discussed, giving particular attention to the influence of membrane materials (solid membrane support and organic liquid membrane (LM) phase). Various approaches proposed in literature to enhance SLM stability are also reviewed. Modification of the solid membrane support, creating an additional layer on membrane surface, which acts as a barrier to LM phase loss, increases system stability, but the membrane permeability, and then the flux, decrease. Stagnant Sandwich Liquid Membrane (SSwLM), an implementation of the SLM system, results in both high flux and stability compared to SLM. Finally, possible large scale applications of SLMs are also reviewed, evidencing that if the LM separation process is opportunely carried out (no production of byproducts), it can be considered as a green process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.310-323
• /
• 2004

In this paper, we extend the multiple time scale control framework to window-based congestion control, in particular, TCP This is performed by interfacing TCP with a large tine scale control nodule which adjusts the aggressiveness of bandwidth consumption behavior exhibited by TCP as a function of "large time scale" network state. i.e., conformation that exceeds the horizon of the feedback loop as determined by RTT Our contribution is threefold. First, we define a modular extension of TCP-a function call with a simple interface-that applies to various flavors of TCP-e.g., Tahoe, Reno, Vegas and show that it significantly improves performance. Second, we show that multiple time scale TCP endows the underlying feedback control with preactivity by bridging the uncertainty gap associated with reactive controls which is exacerbated by the high delay-bandwidth product in broadband wide area networks. Third, we investigate the influence of three traffic control dimensions-tracking ability, connection duration, and fairness-on performance. Performance evaluation of multiple time scale TCP is facilitated by a simulation bench-mark environment which is based on physical modeling of self-similar traffic.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.22-29
• /
• 2008

A numerical investigation is made on the effects of the location and shape of the front wall of an OWC(Oscillating Water Column) chamber on the hydroelastic response of a VLFS. Most of the studies on the effects of an OWC chamber on the response of a VLFS have assumed the location of the OWC chamber to be at the front of the VLFS. In the present study, an OWC-chamber is introduced at an arbitrary position in relation to a VLFS to determine the influence of the location and shape of the OWC chamber on the hydroelastic response of the VLFS. A finite element method is adopted as a numerical scheme for the fluid domain. or the finite element method, combined with a mode superposition method, is applied in order to consider the change of mass and stiffness The OWC chamber in a piecewise constant manner. or the facilitated anefficient analysis of The hydroelastic response of the VLFS, as well as the easy modeling of different shape and material properties for the structure. Reduction of hydroelastic response of the VLFS is investigated for various locations and front wall shapes of the owe chamber.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.569-574
• /
• 2005

This paper presents the core technology of Construction Business Process Automation to model and automate construction business processes. Business Process Reengineering (BPR) and Automation (BPA) have been recognized as one of the important aspects in construction business management. However, BPR requires a lot of efforts to identify, document, implement, execute, maintain, and keep track thousands of business processes to deliver a project. Moreover, existing BPA technologies used in existing Enterprise Resource Planning (ERP) systems do not lend themselves to effective scalability for construction business process management. Application of Workflow and Object Technologies would be quite effective in implementing a scalable enterprise application for construction community. This paper present the technologies and methodologies for automating construction business processes by addressing how: 1) Automated construction management tasks are developed as software components, 2) The process modeling is facilitated by dragging-and dropping task components in a network, 3) Raising business requests and instantiating corresponding process instances are delivered, and 4) Business process instances are executed by using workflow technology based on real-time simulation engine. This paper presents how the construction business process automation is achieved by using equipment reservation and cancellation processes simplified intentionally.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.12
• /
• pp.11-21
• /
• 2023

Purpose: This study aims to investigate the impact of mobile shopping app components on shopping flow and the continuous usage intention of the shopping apps in the rapidly growing mobile market facilitated by advancements in the mobile environment. Research Methodology: A survey was conducted, targeting users aged 20 and older with experience in using mobile shopping apps. The responses of 456 participants were analyzed through frequency analysis, exploratory factor analysis, reliability analysis, confirmatory factor analysis, and structural equation modeling. Results: The study found that within the components of mobile shopping apps, enjoyment significantly impacted both shopping flow and the continuous usage intention of shopping apps. The diversity of product assortment had a significant effect only on shopping flow. The usefulness and ease of use influenced on the intention to continue using shopping apps. Conclusions: Based on the findings, it is recommended that shopping app operators try to identify essential components for stimulating user interest and engagement when developing or modifying apps. Additionally, a diverse range of products enhances the shopping experience and drives spontaneous purchases. Furthermore, providing an easy interface and minimizing the effort required, this experience can enhance user perception of its value and sustain consumers' continuous usage intention of the shopping app.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.2
• /
• pp.328-349
• /
• 2024

In the last decade, Korean culture has progressively facilitated the assimilation of appearance-related norms established by modern Korean society among young generations in Vietnam. Of note, Vietnamese consumers residing in Korea, under the influence of diverse sociocultural factors, are aligning themselves with an ideal standard of Korean beauty through cultural adaptation. This study explores how Vietnamese students internalize Korean beauty standards and the resultant negative behavioral reactions. We investigated the effects of sociocultural pressures (media, in-group, and out-group pressure) on risky appearance management and irrational purchase behavior by mediating sociocultural internalization toward appearance. We tested how the mechanism underlying these variables differs based on how long one has resided in Korea. A total of 213 female participants were surveyed online. The research model was tested using structural equation modeling through AMOS 22.0. The findings show that media and out-group pressure significantly increased sociocultural internalization, which led to consumer behavior in the form of risky appearance management and irrational purchases. The influence of internalization on consumption behavior was stronger for short-term residents of Korea. This study contributes to the literature on acculturation by investigating how foreign consumers accept the host country's ideal beauty standards.

• The Journal of Information Systems
• /
• v.33 no.2
• /
• pp.47-80
• /
• 2024

Purpose With the rapid evolution of the OTT platform, this study addresses a notable gap in the existing literature by examining the impact of celebrity involvement in OTT contents on the intention to visit the country. We explore the intricate mechanisms through which the audience's sense of telepresence, facilitated by OTT technology, and parasocial relationships with celebirities contribute to the formation of the national image and, consequently, influence the intention to visit the country. Design/methodology/approach This study applied Partial Least Square Structural Equation Modeling (PLS-SEM) using survey data from 222 participants. Findings Our findings reveal a positive effect of celebrity involvement on both telepresence and parasocial relationship. Additionally, we observe a positive relationship between telepresence and parasocial relationship. The study further highlights the impact of these factors on the cognitive and affective national images. The cognitive and affective national images, in turn, positively influence the overall national image, ultimately impacting the intention to visit the country. This research contributes to the understanding of the interplay between psychological factors related to viewer-celebrity relationships and the technical characteristics of OTT contents in shaping national images and travel intentions.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.242-252
• /
• 2024

This study introduces a prototype for a virtual zoo initiative, aimed at optimizing resource utilization and minimizing animal displacement from their natural habitats. The prototype features a thoughtfully developed three-dimensional representation of an emperor penguin, with animations designed to emulate real-life behaviors. An investigation into file format distinctions for scientific research, encompassing Wavefront(OBJ), Collada(DAE), and Filmbox(FBX) formats, was conducted. The research utilized the Hololens 2 device for visualization, Unity for environment development, Blender for modeling, and C# for programming, with deployment facilitated through Visual Studio 2019 and the Mixed Reality Toolkit. Empirical examination revealed the OBJ format's suitability for simple geometric shapes, while DAE and FBX formats were preferred for intricate models and animations. DAE files offer detailed preservation of object structure and animations albeit with larger file sizes, whereas FBX files provide compactness but may face scalability constraints due to extensive data integration. This investigation underscores the potential of virtual zoos for conservation and education, advocating for further exploration and context-specific implementation.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.4
• /
• pp.786-819
• /
• 2014

Emphasizing the importance of R&D as a source of open innovation, Korean government is developing various programs focused on technology commercialization and is expanding investment on it. In spite of those efforts, technology commercialization is not vitalized yet due to the lack of demand for technology transfer, R&D planning scheme without considering market, immaturity of technology market, and so on. This study aims to suggest the business ecosystem model so that technology commercialization could be facilitated based on business ecosystem perspective. We set the framework for modeling a business ecosystem through reviewing the previous works, and draw several problems to be solved regarding public R&D commercialization in Korea from the perspective of ecosystem. Considering those, this research proposes the business ecosystem model for public R&D commercialization as a reference model for describing, discussing, and developing the technology commercialization strategy. The proposed model consists of 4 domains as follows: R&D, technology market, information distribution channels, and customers. The business ecosystem model shows that technology commercialization could be facilitated to create the market value through close relationship and organic cooperation among its members that form the ecosystem. Public research institutes as a keystone player could control the fate of the ecosystem. In this regard, this paper suggests roles of public research institutes for evolving the business ecosystem.

• Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.140-151
• /
• 2014

Storing, and the loading and unloading of materials at production sites in the manufacturing sector for mass production is a critical problem that affects various aspects: the layout of the factory, line-side space, logistics, workers' work paths and ease of work, automatic procurement of components, and transfer and supply. Traditionally, the nesting problem has been an issue to improve the efficiency of raw materials; further, research into mainly 2D optimization has progressed. Also, recently, research into the expanded usage of 3D models to implement packing optimization has been actively carried out. Nevertheless, packing algorithms using 3D models are not widely used in practice, due to the large decrease in efficiency, owing to the complexity and excessive computational time. In this paper, the problem of efficiently loading and unloading freeform 3D objects into a given container has been solved, by considering the 3D form, ease of loading and unloading, and packing density. For this reason, a Group Packing Approach for workers has been developed, by using analyzed truck packing work patterns and Group Technology, which is to enhance the efficiency of storage in the manufacturing sector. Also, an algorithm for 3D packing has been developed, and implemented in a commercial 3D CAD modeling system. The 3D packing method consists of a grouping algorithm, a sequencing algorithm, an orientating algorithm, and a loading algorithm. These algorithms concern the respective aspects: the packing order, orientation decisions of parts, collision checking among parts and processing, position decisions of parts, efficiency verification, and loading and unloading simulation. Storage optimization and examination of the ease of loading and unloading are possible, and various kinds of engineering analysis, such as work performance analysis, are facilitated through the intelligent 3D packing method developed in this paper, by using the results of the 3D model.