• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.342-348
• /
• 2020

Anatomical changes in the facial and alveolar bones occur after multiple teeth are extracted. In the maxilla, the alveolar bone is absorbed in the direction and inclination of the root, and the remaining alveolar bone becomes shorter, reducing the diameter of the arch. In addition, as the nasolabial angle increases, the support of the lips and the aesthetics of the face are lost. This case reports a functional and aesthetically satisfactory results of full mouth rehabilitation with the implant-supported fixed prosthesis using a zirconia framework.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.1
• /
• pp.21-26
• /
• 2006

Considering the skeletal class III malocclusion that complains of mandibular prognathism, there have been some studies of the mandibular change for comparing the changes of pre operative with post operative state. Nowadays it is common to do the orthognathic 2-jaw surgery for the correction of the maxillary deficiency, the post operative stability and the esthetics. We compare and analyze the changes of soft tissue around the nose and the lip with the changes in the direction and the amount of maxilla. Patients who were diagnosed as maxillofacial deformity and received orthognathic surgery of both jaws at Yongdong Severance hospital from 2001 through 2003 were included in this study. Their lateral cephalograms were analyzed, and the post operative change of hard tissue and soft tissue were studied. Upon analyzing the preoperative cephalograms and 6 month post operative cephalograms, there were significant in the vertical change of Labialis superius(Ls) and Stomion(Stm) in soft tissue in relation to the vertical change of skeletal landmarks (Anterior Nasal Spine, Subspinale, Prosthion, Incision Superious). In addition, there were no significance in horizontal movement of the skeletal landmarks among groups. In terms of hard tissue landmarks, group 3(maxillary posterior impaction and advancement surgery group) showed significantly greater change in the vertical movement of Anterior Nasal Spine(ANS), Subspinale(A), Prosthion(Pr), and Incision Superious(Is) compared with other groups. In terms of soft tissue change, group 3 showed more significant change in the vertical movement of Ls and Stm. This study calculated the changes of the skeletal and soft tissue landmarks in order to act as a guide in planning and performing the surgery and as a reference in predicting the postoperative change of facial appearance.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.566-574
• /
• 2006

Purpose : This study was performed to provide an anatomical information of the mandibular ramus for the successful inferior alveolar nerve block. Three dimensional images were reconstructed from the computerized tomography (CT) and the anatomical evaluation of the mandibular ramus was done. Materials and methods : Sixty-four patients who had been taken the facial CT scans from 2000, Jan to 2003, June was selected. The patients who had the anterior or posterior teeth misssing, edentulous ridge, and jaw fracture were excepted. In the occulusal plane, the lingual surface angle (LSA) between the mid-sagittal plane and the mandibular molar lingual surface from the 2nd premolar to the 2nd molar, the inner ramal surface angle (IRSA), the maximum inner ramal surface angle (MxIRSA), and the outer ramal surface angle (ORSA) to the-mid sagittal plane were measured. The inner ramal surface angle in the ligular tip level (IRSA-L) and the outer ramal surface angle in the ligular tip level (ORSA-L), the ramal length (RL), and the anterior ramal length (ARL) were also measured in the lingular tip level. Results : In the lingular tip level, the mean IRSA-L and ORSA-L were $28.6{\pm}6.3^{\circ}$ and $17.9{\pm}4.9^{\circ}$ respectively. The larger was the IRSA, the larger was the ORSA. In the lingular tip level, the mean ramal length was 35.8${\pm}$3.4 mm. The larger was the IRSA-L, the shorter was the ramal length. On the lingular tip level, the mean anterior ramal length from anterior ramus to lingular tip was 19.6${\pm}$3.3 mm. when the ramal length was longer, the anterior ramal length was also longer. On the lingular tip level, there was positive correlation vetween the IRSA and the ORSA, negative correlation between the IRSA and the ramal length, and positive correlation between the ramal length and the lingular tip level to the anterior ramus. There was no statistical meaning of data between sex and age. Conclusion : In the clinical view of the results so far achieved, if the direction of needle is closer to posterior it is able to contact bone on lingular tip when the internal surface of ramus is wided outer.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.247-265
• /
• 2017

With the increasingly diverse, sophisticated and complex character animations that can be represented in 3D animations, the importance of rigging, which can most directly affect animating quality, is becoming more and more important. In addition, rapidity is another crucial aspect of 3D animation production. So, the importance of technical director's role which is accurate and rapid handling of rigging pipeline building and immediate application and, corrections of errors during the longest and manpower consuming animation production is more becoming key. Baek Ji Won and Kim Jae-woong (2014) said, "The technical director is adding new importance to the new job, which is created by 3D animation, in conjunction with the limited production period, manpower, budget and production process." Most major overseas studios are developing in-house software to handle rigging and animation processes. Software development code is used to freely develop and modify production pipelines in accordance with the direction of the work. They are making efforts to build an optimal environment for animators. However, too many efforts and ineffective efforts have been made to develop, adapt, and stabilize the rigging process for small producers, creators, and students who do not have the capacity to develop their own in-house software or hire a technical director. This study suggests the most suitable auto-rigging tool among the many auto-rigging tools released in the market, and suggests the most accurate and quick auto-rigging process setting method for those who have insufficient knowledge about 3D character rigging. The efficiency of use of auto-rigging tool was examined.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.197-203
• /
• 2004

Tweed-Merrifield directional force technology is a very useful concept, especially for the treatment of Glass II malocclusion. It has contributed to treating a favorable counter-clockwise skeletal change and balanced face, while head gear force using high pull J-hook (HPJH) in an appropriate direction is also essential to influence such results. Clinicians have encountered some problems concerning patients' compliance; however skeletal anchorage has been used widely of late because it does not necessitate patients' compliance, yet produces absolute anchorage. In this case, a good facial balance was obtained by Tweed-Merrifield directional force technology using HPJH together with skeletal anchorage, which provided anchorage control in the maxillary posterior area, torque control in the maxillary anterior area, and mandibular response. This indicates 4hat skeletal anchorage can be used to reinforce sagittal and vortical anchorage in the maxillary posterior area during the retraction of anterior teeth. The author used HPJH for torque control, Intrusion, and the bodily movement of maxillary anterior teeth during on masse movement. However, it is thought that such a result nay also be achieved by substituting mini- or microscrews for HPJH. Consequently, Tweed-Merrifield directional force technology using skeletal anchorage for the treatment of Class II malocclusion not only maximiaes the result of treatment but can also minimize patients' compliance.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.255-263
• /
• 2006

Objectives: This article reported three patients developed anterior open bite seemed to be related to TMJ anterior disc dislocation without reduction(ADD WO R), but no evidence of condylar destructive or collapse and analyzed the craniofacial skeletal structure by means of cephalometric analysis. Results: All patients suddenly developed a centric relation/centric occlusion discrepancy, an increased overjet and an anterior open bite following ADD WO R. All patients had Angle's Class I occlusion and shallow bite, but they had skeletally Class III and Class II pattern and all were vertically significant hyperdivergent type. Conclusions: These 3 patients had characteristics of common facial morphology including:(1)Angle classification Class I and shallow bite,(2)high mandibular plane angle,(3)high gonial angle. Developed anterior open bite resulted from clockwise rotation of the mandible related TMJ ADD WO R, rather than a result from the eruption of posterior teeth. We hypothesize rotation may relate to attached direction of masticatory muscle.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.451-459
• /
• 2019

This study is aims to examine how the skeleton character in Pixar's Animation is visualized for the narrative of the film and suggests the direction of attractive character development corresponding to the story. First of all, it was conducted the case studies on the narrative of animation, character design, character's emotion expression, and animations featuring skeleton character. Based on this study, it was derived the visual representation of the skeleton character featuring in and analyzed the role and function in the animation. As a result, the expressions by the skeleton's eyes, eyebrows, mouth, lips, and jaw played the most important role for the emotional expression and lines in , and the major characteristic for human facial expression was reflected in the design of the skeleton character. In addition, the various props were used to provide the detailed informations of the skeleton's character, and it was expressed the movement emphasizing its essential attribute. Finally, the skeleton's symbolic image was strengthened by composing and arranging the skeleton's image through Mise en scene. It is expected that this study will be used as a reference for the animation character related researchers and practitioners in the business and it helps develop attractive characters fir the narrative animation in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.59-68
• /
• 1999

Recently, research and developmental direction of communication system is concurrent adopting voice data and face image in speaking to provide more higher recognition rate then in the case of only voice data. Therefore, we present a method of lipreading in speech image sequence by using the 3-D facial shape model. The method use a feature information of the face image such as the opening-level of lip, the movement of jaw, and the projection height of lip. At first, we adjust the 3-D face model to speeching face image sequence. Then, to get a feature information we compute variance quantity from adjusted 3-D shape model of image sequence and use the variance quality of the adjusted 3-D model as recognition parameters. We use the intensity inclination values which obtaining from the variance in 3-D feature points as the separation of recognition units from the sequential image. After then, we use discrete HMM algorithm at recognition process, depending on multiple observation sequence which considers the variance of 3-D feature point fully. As a result of recognition experiment with the 8 Korean vowels and 2 Korean consonants, we have about 80% of recognition rate for the plosives and vowels. We propose that usability with visual distinguishing factor that using feature vector because as a result of recognition experiment for recognition parameter with the 10 korean vowels, obtaining high recognition rate.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.609-616
• /
• 2017

In this paper, we propose an algorithm to obtain more stable and high recognition rate by using left and right rotation information of input image in order to obtain a stable recognition rate in face recognition. The proposed algorithm uses the facial image as the input information in the web camera environment to reduce the size of the image and normalize the information about the brightness and color to obtain the improved recognition rate. We apply Principal Component Analysis (PCA) to the detected candidate regions to obtain feature vectors and classify faces. Also, In order to reduce the error rate range of the recognition rate, a set of data with the left and right $45^{\circ}$ rotation information is constructed considering the directionality of the input face image, and each feature vector is obtained with PCA. In order to obtain a stable recognition rate with the obtained feature vector, it is after scattered in the eigenspace and the final face is recognized by comparing euclidean distant distances to each feature. The PCA-based feature vector is low-dimensional data, but there is no problem in expressing the face, and the recognition speed can be fast because of the small amount of calculation. The method proposed in this paper can improve the safety and accuracy of recognition and recognition rate faster than other algorithms, and can be used for real-time recognition system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.26-32
• /
• 2019

The purpose of this study is to improve the running speed on a small-radius curved section on an existing train line. When the transition curve was extended, and the amount of movement in the horizontal direction tended to increase as the curve radius increased. The amount of increase in the transition curve extension was lowest when extending the curve radius, and the amount of horizontal movement was the lowest when changing the curve radius to a cosinusoidal curve. As a result of applying the pass rate after improvement to the Kyeongbu line, there was a time-shortening effect of 9.4 to 11.6% and a facial expression speed increasing effect when the curve radius was fixed and the transition curve was changed to a sinusoidal curve. In conclusion, the most effective way to improve the running speed on an existing train route is to change the image to concrete and to change the relaxation curve to a cosinusoidal curve. The amount of horizontal movement of the track is small, and the speed improvement effect is excellent.