• The Journal of Engineering Geology
• /
• v.26 no.2
• /
• pp.187-196
• /
• 2016

We conducted three-dimensional finite element analysis to predict the presence of upcoming fault zones during tunneling. The analysis considered longitudinal displacements measured at tunnel face, and used 28 numerical models with various fault attitudes. The x-MR (moving range) control chart was used to analyze quantitatively the effects of faults distributed ahead of the tunnel face, given the occurrence of a longitudinal displacement. The numerical models with fault were classified as fault gouge, fault breccia, and fault damage zones. The width of fault cores was set to 1 m (fault gouge 0.5 m and fault breccia 0.5 m) and the width of fault damage zones was set to 2 m. The results, suggest that fault centers could be predicted at 2~26 m ahead of the tunnel face and that faults could be predicted earliest in the 45° dip model. In addition, faults could be predicted earliest when the angle between the direction of tunnel advance and the strike of the fault was smallest.

• Archives of Plastic Surgery
• /
• v.35 no.2
• /
• pp.139-146
• /
• 2008

Purpose: The objective of this study is anthropometric analysis of mouth and lower face of Korean. The relationship of soft-tissue to underlying bony structures determine the overall aesthetics of the face. The goal of aesthetic surgery of the face is to achieve the ideal normal and enhance the aging face. The purpose of present study was to determine the change of the morphology of the mouth and lower face based on soft-tissue landmarks according to age group to facilitate prediction during aesthetic surgery. Methods: The standardized photographs of 2,018 healthy volunteers(18 to 79 years of age; 1,070 males, 948 females) were investigated. Age groups were classified into young, middle-aged, and elderly groups. Five and seven items were measured on frontal and lateral view photographs, respectively. Individual dimensions were compared in the three age groups and between males and females. Results: The width of mouth is 4.5 times larger than that of philtrum. Most of measured data decreased with age. However, woman's lip width of the mouth somewhat increased from the young to elderly. The width of lower face is 2.5 times larger than mouth in young age group and increased slightly from the young to middle-aged and thereafter slightly decreased to elderly group. Upper lip was more higher than lower lip and male lip was more higher than female. But male and female lip height is similar at old age. Conclusion: Most of Koreans showed prominent lower face because of the development or protrusion of the mandible. And the descent of soft-tissue around the mouth was one of the significant characteristics of senile change. The posterior retrusion of the subnasal was an another characteristic. This study will help to elucidate the age-related dimensional differences of the human being and to provide useful information for clinical applications in oral and aesthetic surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.217-223
• /
• 1996

In order to evaluate the changes before and after secondary operations in the patients with cleft lip objectively using full face photographs, the author analyzed results of improvement on nasal width and mouth width and asymmetry of nostril. 1. The ration of asymmetry of thenostril is changed from average 1.24 preoperatively to average 1.08 postoperaively : 61.2% is improved postoperatively. 2. The ratio of nasal width compared with intermedial canthal distance is changed from average 1.15 preoperatively to average 1.10 postoperatively : 3.8% is reduced posteroperatively. 3. The ratio of mouth width compared with intermedial canthal distance is changed from average 1.08 preoperatively to average 1.03 postoperathvely : 4.1% is reduced posteroperatively.

• Journal of Sasang Constitutional Medicine
• /
• v.26 no.4
• /
• pp.350-364
• /
• 2014

Objectives This study was aimed to find the significant features of face form according to the Taeeumin and Soyangin by analyzing the three-dimensional face information data. Also, making standard face of the Taeeumin and Soyangin was an object of this study. Methods We collected three-dimensional face data of patients aged between 20~45 years old diagnosed by a specialist of Sasang constitutional medicine. The data were collected using a 3D scanner, Morpheus 3D(Morpheus Corporation, KOREA). Extracting a face feature point total of 64, was set to 332 pieces(height, angle, ratio, etc.) of each variable between feature points. ANOVA test were used to compare the characteristics of subjects according to the Taeeumin and Soyangin. Results When not to consider gender, the Taeeumin and Soyangin were different from the 18 items(3 items in the ear, 9 items in the eye, 1 item in the nose, 1 item in the mouth, 4 items in the jaw). When to consider gender, the Taeeumin and Soyangin men were different from the 6 items(1 item in the ear, 2 items in the nose, 3 items in the face). And the Taeeumin and Soyangin women were different from 17 items(1 item in the ear, 10 items in the eye, 2 items in the nose, 1 item in the mouth, 3 items in the face). Conclusions These results show Taeeumin's face(both men and women) width of the right and left is larger than the length of the top and bottom. Compared to men of Soyangin, men of Taeeumin has greater wings of the nose. Compared to women of Soyangin, women of Taeeumin has longer length of the eye. Soyangin's face(both men and women) length of the top and bottom is larger than the width of the right and left. Compared to men of Taeeumin, men of Soyangin has smaller wings of the nose. Compared to women of Taeeumin, women of Soyangin has more stereoscopic facial features at the top and bottom of the lateral face. Also, by accumulating three-dimensional face data, this study modeled the standard facial features by Taeeumin and Soyangin. These results may be helpful in the development of Sasang constitutional diagnostics utilizing the characteristics of the facial form at later.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.661-666
• /
• 2004

The purpose of this study is to measure the rotational vibration, radial vibration, and axial vibration for the helical gear with the wide face width relative to the whole depth. For this purpose, the experimental apparatus is designed and manufactured. The gear vibration of each direction is measured by the accelerometers attached at the gear body. As a result, meshing frequency and second harmonic component are greatly contributed to the gear vibration. As the rotational speed is increased, meshing frequency component has the more significant peak than the second harmonic one. However, the doubled torque decreases the vibration magnitude on the contrary and changes order of the vibration magnitude in each direction.

• The Journal of Korean Medicine
• /
• v.42 no.4
• /
• pp.102-119
• /
• 2021

Objectives: Facial diagnosis is an important part of clinical diagnosis in traditional East Asian Medicine. In this paper, using a fully automated facial shape analysis system, we show that facial morphological features are associated with cold pattern. Methods: The facial morphological features calculated from 68 facial landmarks included the angles, areas, and distances between the landmark points of each part of the face. Cold pattern severity was determined using a questionnaire and the cold pattern scores (CPS) were used for analysis. The association between facial features and CPS was calculated using Pearson's correlation coefficient and partial correlation coefficients. Results: The upper chin width and the lower chin width were negatively associated with CPS. The distance from the center point to the middle jaw and the distance from the center point to the lower jaw were negatively associated with CPS. The angle of the face outline near the ear and the angle of the chin line were positively associated with CPS. The area of the upper part of the face and the area of the face except the sensory organs were negatively associated with CPS. The number of facial morphological features that exhibited a statistically significant correlation with CPS was 37 (unadjusted). Conclusions: In this study of a Korean population, subjects with a high CPS had a more pointed chin, longer face, more angular jaw, higher eyes, and more upward corners of the mouth, and their facial sensory organs were relatively widespread.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.639-640
• /
• 2008

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.542-543
• /
• 2012

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2019

In electric agricultural machine the gearbox is used to increase torque and lower the output speed of the motor shaft. The gearbox consists of several shafts, helical gears and spur gears works in series. Optimization plays an important role in gear design as reducing the weight or volume of a gear set will increase its service life and improve the bearing capacity. In this paper the basic design parameters for gear like shaft diameter and face width are considered as the input variables. The bending stress and material volume is considered as the objective function. ANSYS was used to investigate the bending stress when the variable was changed. Artificial Neural Network (ANN) was used to obtain the mathematical model of the system based on the bending stress behaviour. The ANN was used since the output system is nonlinear. The Genetic Algorithm (GA)　technique of optimization is used to obtain the optimized values of shaft diameter and face width on the pinion based on the ANN mathematical model and the results are compared as that obtained using the traditional method. The ANN and GA were performed using MATLAB. The simulation results were shown that the proposed algorithm was successfully calculated the value of shaft diameter and face width to obtain the minimal bending stress and material volume of the gearbox.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.19-27
• /
• 1995

Face milling is required to study cutting process with a view of multipoint cutter. This experimental study mainly deals with the single and multi-insert cutting characteristics using coated tool. Because metal cutting of the single and multi-insert has a large relation to the improvement of productivity, the economic cutting process can be achieved by the analysis of proper metal cutting mechanism. Therefore, machining characteristics of face molling in this paper has been studied by investigating the role of different insert number which is concerned with mean cutting force, the RMS values of AE(acoustic emission) signal, tool life and surface roughness in milling SS 41 and SUS 304. The cutting force and AE signal are monitored to make an analysis of cutting process. The surface roughness of the specimens machined by inserts of different numbers is measured at different speeds, feeds and depth of cut. The width of flank wear is also observed.